Heavy Duty Positive Displacement Vane Pump - 12V GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  All models have an ignition protected motor and #316 stainless steel shaft. Specifications: Self Priming: YES Thread NPT: 1/2" + Garden Hose Adaptor Control Type: None Max GPM: 6.5 Breaker DC: 30 Amp

Heavy Duty Positive Displacement Vane Pump - 24V  GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  All models have an ignition protected motor and #316 stainless steel shaft. Specifications: Self Priming: YES Thread NPT: 1/2" + Garden Hose Adaptor Control Type: None Max GPM: 6.5 Breaker DC: 15 Amp

Heavy Duty Positive Displacement Reversing Vane Pump - 12V GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  All models have an ignition protected motor and #316 stainless steel shaft. Specifications: Self Priming: YES Thread NPT: 1/2" + Garden Hose Adaptor Control Type: Pump Mounted Reversing Switch Max GPM: 6.5 Breaker DC: 30 Amp

Heavy Duty Positive Displacement Reversing Vane Pump - 24V  GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet),  fuel transfer, ballast transfer, and oil change.  All models have an ignition protected motor and #316 stainless steel shaft. Specifications: Self Priming: YES Thread NPT: 1/2" + Garden Hose Adaptor Control Type: Pump Mounted Reversing Switch Max GPM: 6.5 Breaker DC: 15 Amp

Johnson 10-13406 Series 4.0 & 5.2 Aqua Jet Water Pressure System FEATURES Pump Body: Nylon/Polypropylene Valve Housing: Polypropylene/Polyamide Port Size: 3/8" NPT, 1/2" hose (ø 13 mm) Flow: 3.4 GPM for WPS 4.0 5.1 GPM for WPS 5.2 Pressure: Cut-In: 25 PSI, 1.7 bar Cut-Out: 40 PSI, 2.8 bar Valves: Santoprene/EPDM Diaphragm: Santoprene Motor: 12 or 24 VDC with built in thermal protection. Duty cycle: Intermittent, max 20 min. The motor is ignition protected according to ISO 8846 (Small craft – Electrical devices – Protection against ignition of surrounding flammable gases). 100 Watt for WPS 4.0, 150 Watt for WPS 5.2.     APPLICATIONS / CHARACTERISTICS The WPS pump is a five chamber positive displacement diaphragm pump. This pump is the ideal choice for pressurizing water in a closed system such as that found in a boat or in a recreational vehicle. It can easily build the pressure required for a pressurized water supply system. Quiet operation • Smooth flowing • Self priming ( 2m 6.5ft for WPS 4.0) (2.5m 8.2ft for WPS 5.2) • Integrated pressure switch turns pump on and off automatically when tap is opened and closed • Dry running without damage • Low power consumption • Quick disconnect fittings.     Johnson 10-13406-107  - 5.2 Aqua Jet Water Pressure System 12V    

Gear Pump 3/4" NPT Ports - 12V Positive Displacement Gear Pump The Concept: Made in the USA GROCO Gear Pumps are self-priming, instantly reversible, and are capable of operation in either direction.  Relatively low flow (less than vane pumps) makes them suitable for duties such as deck-wash, fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor, #316 stainless steel shaft, and are available in models that provide reversing (R), remote reversing (RR), and reversing with touchpad (RT) control options. Featuring: Self Priming: Yes Thread NPT: 3/8" Control Type: None Max GPM: 3 Breaker DC: 25 Amp

Shurflo 2088-514-145 Diaphragm Pump 3.6 GPM 12VDC Shurflo Diaphragm Pump Premium with Cooling Fins, 3.6 GPM Open Flow, 12VDC Continuous Duty, Santoprene Valves, Santoprene Diaphragm, 45 PSI Demand Switch (adjustable 30-50 PSI), 1/2" MSPT Ports, Polypropylene Housing, N.S.F. Listed.   Runs directly on 12 Volt DC 45 PSI pressure switch build-in Built-in check valve, prevents back flow of fluid through the pumps Self Priming up to 2.7 vertical lift meters (9′) Chemical resistant materials Can run dry without damage 1 year warranty   Positive Displacement 3 Chamber Diaphragm Pump Pressure Switch: Splash-Proof, Adjustable from 30 to 50 PSI.. Factory Set at 45 PSI Shut-Off, Turn On 25 PSI Bypass: 45 + 60 PSI Springs Check Valve: (1-Way Operation) Prevents Reverse Flow Liquid Temperature: 130 Degrees Fahrenheit (54 Degrees Centigrade) Max. Prime: Self-Priming Up To 9.0 Ft. Vertical Weight: 6.8 Lbs (3.1 Kg)   Duty Cycle: Continuous

Heavy-Duty Bilge Pump 2000 Series Part #: 4760-4 Heavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat. Attwood's highest capacity pump! Ball-bearing design provides for cooler motor operation and longer life, Delivers over 2000 GPH at open flow while drawing less than 7-amps. Features: 12V CE Rated 36" Wire 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

AQUA JET UNO 3.5 GPM 12V Water Pressure System FEATURES Pump Body: Polypropylene Valve Housing: Polypropylene Port Size: 1/2" Hose (ø 18 mm) Flow: 3.1 GPM (11.8 L/Min) for Aqua Jet UNO 3.5 5.1 GPM (19.4 L/Min) for Aqua Jet UNO 5.2 Pressure: Cut-In: 25 PSI, 1.7 bar Cut-Out: 40 PSI, 2.8 bar Valves:Santoprene Diaphragm: Santoprene Accumulator Tank: 2 Liter with Internal Bladder Motor: 12 VDC with built in thermal protection. Duty cycle: Intermittent, max 20 min. The motor is ignition protected according to ISO 8846 (Small craft – Electrical devices – Protection against ignition of surrounding flammable gases). 100 Watt for UNO 3.5    APPLICATIONS The Aqua Jet UNO pump is a five chamber positive displacement diaphragm pump system with Accumulator Tank. This pump is the ideal choice for pressurizing water in a closed system such as that found in a boat or in a recreational vehicle. It can easily build the pressure required for a pressurized water supply system.   • Quiet operation • Smooth flowing • Self priming ( 2m 6.5ft for UNO 3.5) • Integrated pressure switch turns pump on and off automatically when tap is opened and closed • Dry running without damage • Low power consumption • Quick disconnect fittings  

Groco C-60 12V Deck Wash Pump, 12Volt  Groco- Deck Wash Vane Pump System 6.5GPM 20-40psi 12VDC   More Info: C60

Heavy Duty Bilge Pump 1600 series 12v: The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included. CE-Approved Features: Heavy duty, 12-pole double ball bearing motor Liquid cooled for extended motor life Quality engineered mechanical/lip seal ISO 8849 Marine and CE standards Easily interchangeable with most similar bilge pumps Pump body: Thermoplastic Shaft seal: Mechanical seal Shaft: Stainless steel (SS2343) Voltage: 12 V Capacity 1.0 m head (13.6 V/27 V): 98 l/min - 1550 GPH Capacity straight (13.6 V/27 V): 100 l/min - 1600 GPH Amperage: 7 A Fuse Size: 10 A Connection: 1-1/8" and 1-1/4" Shaft: SS2343 Wire size: 1.3 mm2 - 16 GA Max height 149 mm - 5.86" Weight 1.3 kg - 2.75 lbs

Heavy Duty Bilge Pump 2200 series 12v The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included. CE-Approved Features: Heavy duty, 12-pole double ball bearing motor Liquid cooled for extended motor life Quality engineered mechanical/lip seal ISO 8849 Marine and CE standards Easily interchangeable with most similar bilge pumps Pump body: Thermoplastic Shaft seal: Mechanical seal Shaft: Stainless steel (SS2343) Voltage: 12 V Capacity 1.0 m head (13.6 V/27 V): 120 l/min - 1900 GPH Capacity straight (13.6 V/27 V): 130 l/min - 2060 GPH Amperage: 7.5 A Fuse Size: 12 A Connection: 1-1/8" and 1-1/4" Shaft: SS2343 Wire size: 1.3 mm2 - 16 GA Max height 177 mm - 7" Weight 2.7 kg - 6 lbs

Heavy Duty Bilge Pump 4000 Series 12v: The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included. CE-Approved Features: Heavy duty, 12-pole double ball bearing motor Liquid cooled for extended motor life Quality engineered mechanical/lip seal ISO 8849 Marine and CE standards Easily interchangeable with most similar bilge pumps Pump body: Thermoplastic Shaft seal: Mechanical seal Shaft: Stainless steel (SS2343) Voltage: 12 V Capacity 1.0 m head (13.6 V/27 V): 164 l/min - 2600 GPH Capacity straight (13.6 V/27 V): 252 l/min - 4000 GPH Amperage: 15 A Fuse Size: 25 A Connection: 1-1/8" and 1-1/4" Shaft: SS2343 Wire size: 2 mm2 - 14 GA Max height 216 mm - 8.5" Weight 2.45 kg - 5.4 lbs

Heavy-Duty Bilge Pump 1700 Series Part #: 4730-4 Heavy-Duty Bilge Pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. Pump all employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Attwood's Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat. The perfect upgrade from 1500 GPH rated pumps especially older and over-rated designs. Easily replaces 2000 GPH rated pumps. Delivers a true 1700 GPH at open flow while drawing less than 6-amps. Features: 12V CE Rated 36" Wire 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Roper Pump 18AM02-2B A Series Gear Pump W/Rv Ports: 3/8 in. Flow-Rate: 7.2 GPM Max RPM: 3600 GPR: .002 Mtg: Flange   Roper A Series pumps are adaptable to a wide range of applications pumping clean ?uids, such as pressure lubrication, hydraulic service, fuel supply or general liquid transfer.   These pumps are designed to operate at standard motor speeds, with provisions for ?ange or foot mounting. The internal bearings are lubricated by the ?uid being pumped. With only two moving parts, the pumps run quietly.   3/8" and 3/4" pumps are 300 PSI and all 1 1/4" - 2" pumps are 150 PSI   Specifications Type of Pump: Positive Displacement Gear Pump Materials of Construction: Cast Iron Housing, Ductile Iron Gears and Drive Shafts, Bronze Bearings and Steel Idler Shafts. Priming: Self Priming Seal Material: Mechanical Seal (AM) Viscosity: Up to 2,200 cSt, 10,000 SSU