|
Cartridge Style Aerator Kit
Converts any good sized ice chest (Esky) into your own portable live bait tank. The Ice Chest Aerator will keepyour live bait alive, or catch fresh, even during the heat of the day. Complete with Batt. clips, Head, Mounting Feet and clear-cut instructions. Since there are no holes to drill the chest can always be returned to its original purpose
|
82.97 |
|
|
Aqua Void 500 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
Specifications:
Pump Size: 500 GPH
Capacity Straight (12V): 600 GPH (38 I/min)
Voltage: 12V
Amp: 2.7A
Fuse: 3.5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 11.2 oz (0.32 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
28.44 |
|
|
Aqua Void 800 GPH Bilge Pump - 12V
With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void.
Experience the Industry-First Quick-Change Motor Connection
Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades.
Take Control of the Boating Experience with Unparalleled Convenience
The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection.
Enjoy Enhanced Efficiency and Higher Flow Rate
Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption.
Trust in Reliable Performance Under Demanding Conditions
Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering.
Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today!
Features:
Heightened efficiency with an increased flow rate - high-flow impeller design
Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires
Water-cooled motor for long service intervals
Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft
No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.
Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps
Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve
Meets the international standard, ISO 8849 marine
Molded T-Slot - Easy Installation with Switches
Specifications:
Pump Size: 800 GPH
Capacity Straight (12V): 795 GPH (50 I/min)
Voltage: 12V
Amp: 3.7A
Fuse: 5A
Hose Connection: 3/4 in.
Wire Size: 16 GA, TAC
Weight: 12.6 oz (0.36 kg)
Body: ABS
Dura Port: PA66/GF - Nylon
Shaft: 316 Stainless Steel
Shaft Seal: Nitrile Rubber
Motor Cartridge: PC-ABS
Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)
|
37.44 |
|
|
Cartridge Combo
Combines the line of cartdrige bilge pumps with automatic operation. Equipped with a non-clogging electronic float switch.
Specs:
Capacity 3' head (13.6V): 50l/min - 800 GPH
Capacity Straight (13.6V): 63l/min - 1000GPH
Amperage: 3.2A
Fuse Size: 5A
Connection: 3/4"
|
88.88 |
|
|
Thru-Hull Nut Aerator - Straight/90°
Specifications:
Thru-Hull
Straight/90°
Nut Aerator
|
5.63 |
|
|
Valve Assembly f/Aerator Heads - 5-3/4" Overall Length
Features:
Overall length: 5-3/4"
Two 3/4" Barbs
Shut off Valve
|
21.17 |
|
|
F38B-19 Multi-Use Utility Pump - Capacity 9GPM / 35 L/MIN
With their high level of flexibility, the DC driven pumps from SPXFLOW Johnson Pump are ideally suited for use in boats as bilge pumps, deck wash pumps, fresh water pumps and refuelling pumps for oil and diesel. Not to be used for pumping paraffin or other thin petroleum products. These pumps may be combined with a vacuum switch for automatic operation. Not to be used for pumping paraffin or other thin petroleum products.
Perfect for bilge pumping, deck wash, water circulation, oil and diesel refueling at dockside service, etc. The motor has a built-in thermal overload for added protection.
Features:
Limited 3 Year Warranty
Typical applications: Bilge pump, fresh water pump, deck washing, fuel oil transfer, fire pump, oil change pump, etc.
Oil-resistant impeller
Self-priming
Easy maintenance
Handle debris (bilge pumping)
Self-priming
All motors are heavy duty to provide long service life even under heavy use
Available in 12 or 24 volts
Specifications:
Body: Bronze
Impeller: 09-824P-9
Seal: Lip seal
Connection: Hose 1" / +" NPT
Length: 180 mm - 7"
Width: 120 mm - 4.72"
Height: 90 mm - 3.54"
Weight: 3 kg - 6.6 lbs
|
207.41 |
|
|
Gear Pump with Oil Change Kit
80-47508-01
GP8-19 12V
Light and compact oil change pump with pump body and gears made of PTFE. Complete with oil dip stickextraction tube 6 and 8 mm (0.236" and 0.315"). 180 cm (70.9") connection wires with baterry clamps.
Port connection: Outlet: 14 mm (0.551") hose Inlet: 8 mm (0.315") hose
Self priming: Up to 1 m (3.28 feet)
Capacity: 8 l/min (2.11 GPM)
Dimension: 140 x 80 mm (5.51" x 3.15")
Weight: 1.1 kg
Fuse size 12V: 8 A
|
103.70 |
|
|
Gear Pump with Oil Change Kit
80-47508-02
GP8-19 24V
Light and compact oil change pump with pump body and gears made of PTFE. Complete with oil dip stickextraction tube 6 and 8 mm (0.236" and 0.315"). 180 cm (70.9") connection wires with baterry clamps.
Port connection: Outlet: 14 mm (0.551") hose Inlet: 8 mm (0.315") hose
Self priming: Up to 1 m (3.28 feet)
Capacity: 8 l/min (2.11 GPM)
Dimension: 140 x 80 mm (5.51" x 3.15")
Weight: 1.1 kg
Fuse size 24V: 6 A
|
97.86 |
|
|
Twin Port Pumps
500 GPH
Offers the convenience of using only one intake for both the livewell and raw water wash down pump.
The 3/4" tapered inlet connects directly to the sea cock and the upper outlet port provides a continuous flow of water through the 3/4" discharge to the livewell while the lower outlet port connects to the wash down pump through either a 1/2" or 3/4" ports.
High pressure inlet seal easily handles the higher pressures created by high speed pickups commonly used.
|
42.96 |
|
|
Talulah Ballast Pump Impeller Kit
A worn or damaged impeller can cause system failure or engine breakdown. SPX's Johnson Pump brand impellers are developed and manufactured for maximum flow and long life. With a genuine spare impeller you can also be sure that you are getting the quality required by engine manufacturers and professionals.
|
32.59 |
|
|
Minor Repair Kit for Johnson 10-24061
This kit contains the following items
JA SP2700-1027B
1
LIP SEAL KIT (PACKAGED)
JS 09-1028BT-1
1
IMPELLER NEO THREADED F7B
Kits are put together at time of order
|
60.48 |
|
|
Minor Repair Kit for Johnson 10-24017
This kit contains the following items
JS 09-0.2247.050
1
SEAL MECHANICAL
JS 09-1028BT-1
1
IMPELLER NEO THREADED F7B
Kits are put together at time of order
|
126.83 |
|
|
Minor Repair Kit for Johnson 10-22335
This kit contains the following items
JS 09-0.2247.050
1
SEAL MECHANICAL
JS 09-1028BT-1
1
IMPELLER NEO THREADED F7B
Kits are put together at time of order
|
126.83 |
|
|
Minor Repair Kit for Johnson 10-21915
This kit contains the following items
JS 09-0.2247.051
1
SEAL ASSEMBLY
JS 09-819B-00
1
IMPELLER NEO F8B 11 BLADE
Kits are put together at time of order
|
226.89 |
|