Turbo 4000 Series II In-Line Blower Part #: 1749-4 Attwood's improved Turbo 4000 Series II sets the standard for in-line blower performance. Utilizing advanced fan blade design techniques, Attwood has developed a blower system that matches air flow of existing in-line blowers at a significantly reduced noise level. The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size. Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads. Features: Nickel-plated motor can for corrosion resistance Stiffening ribs to reduce housing distortion Motor cap to seal wires and motor for water resistance Five-blade fan maximize airflow and efficiency Tabs in intake and exhaust hold ventilation hose/clamp firmly in place Low amp draw motor for longer blower and battery life Built-in mounting feet allow easy vertical or horizontal install 3-Year Warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Turbo 3000 Series In-Line Blower Part #: 1733-4 The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size. Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes 2 tie straps. All are CE certified. 16-gauge tinned and caulked copper wire leads with optional MP1 molded rubber connectors. Improved 3" design. Features: Nickel-plated motor can for corrosion resistance Stiffening ribs to reduce housing distortion Motor cap to seal wires and motor for water resistance Five-blade fan maximize airflow and efficiency Tabs in intake and exhaust hold ventilation hose/clamp firmly in place Low amp draw motor for longer blower and battery life Built-in mounting feet allow easy vertical or horizontal install WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rule In-Line Blower - 3" Ducting Part Number: 140 Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule? in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. For International & US Markets. Features Efficient high-volume air flow Quiet operation Low amp draw Slip-on inlet and outlet ducting connections Sealed motor shaft for moisture protection Corrosion resistant nickel-plated motor housing IMCI (CE) USCG 183.410 Compliant: Ignition protected Applications: Race cars and helmet ventilation Bus ventilation (engine and bathroom fumes) Prison van ventilation (cooling, air-freshening) Blow-up signs and mascots Tanning booths Building ventilation Specifications Approvals: CE Dimensions (H x W x D): 76 x 127 x 81 (mm) ElectricalCharacteristics: 2.9 Amp Flow Rate (US gallons & litres): 135 CFM @ Open Flow Fuse Size: 4 (amp) Product Inlet Fitting: 3" (76 mm) Ducting Product Outlet Fitting: 3" (76 mm) Ducting Voltage: 13.6 (Vdc) WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Rule In-Line Blower - 4" Ducting Part Number: 240 Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. For International & US Markets. Features Efficient high-volume air flow Quiet operation Low amp draw Slip-on inlet and outlet ducting connections Sealed motor shaft for moisture protection Corrosion resistant nickel-plated motor housing IMCI (CE) USCG 183.410 Compliant: Ignition protected Applications: Race cars and helmet ventilation Bus ventilation (engine and bathroom fumes) Prison van ventilation (cooling, air-freshening) Blow-up signs and mascots Tanning booths Building ventilation Specifications Approvals: CE Dimensions (H x W x D): 102 x 152 x 106 (mm) ElectricalCharacteristics: 4.3 Amp Flow Rate (US gallons & litres): 235 CFM @ Open Flow Fuse Size: 7 (amp) Product Inlet Fitting: 4" (102 mm) Ducting Product Outlet Fitting: 4" (102 mm) Ducting Voltage: 13.6 (Vdc) WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

MDM Pumps 4000.07 Poly Volute 4000 Series

3" In-Line Blower Inlet/Outlet - 3" CFM - 158 Johnson Pump in-line blowers provide ventilation for bilges, engine compartments, galleys, and heads. Made from high quality ABS plastic construction, corrosion resistant motors, and premium electrical connections completes these blowers Five blade, quiet, highly efficient, and reliable operation will provide years of long life Compact and with mounting feet makes it easy to install on any flat surface

4" In-Line Blower Inlet/Outlet - 4" CFM - 240 Johnson Pump in-line blowers provide ventilation for bilges, engine compartments, galleys, and heads. Made from high quality ABS plastic construction, corrosion resistant motors, and premium electrical connections completes these blowers Five blade, quiet, highly efficient, and reliable operation will provide years of long life Compact and with mounting feet makes it easy to install on any flat surface

Air Blower 1000 Inline 165 - 12V 7″ in-line mounted marine ventilation 12V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 165mm length. Sheltered blades from blower housing interference at tough installation. Compact 5 blade design to maximize performance.  Features: Weight: 1.2 kg/2 lbs Dimensions: 165/6.5L x 220/8.7H x 178/7W mm/in  Type: 7" In-Line For continous duty  7A fuse *Certification: CE marked ISO 9097:1991 Marine (small craft electrical fans), ISO8846 1990 (ignition protection), ISO 10133 2000 (electrical systems), EN55014-1 2006 (2004/108EC)

Air Blower 1000 In-Line 250 - 12V 7″ in-line mounted marine ventilation 12V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 250mm length. Sheltered blades from blower housing interference at tough installation. Compact 5 blade design to maximize performance.  Features: Weight: 1.4 kg/3 lbs Dimensions: 250/9.8L x 220/8.7H x 178/7W mm/in  Type: 7" In-Line For continous duty 7A fuse Interchangeable with Vetus Vent17812A. *Certification: CE marked ISO 9097:1991 Marine (small craft electrical fans), ISO8846 1990 (ignition protection), ISO 10133 2000 (electrical systems), EN55014-1 2006 (2004/108EC)

65 Series Marine Carbon Monoxide Alarm - Flush Mount - 12V - White Features: NMMA Listed Component Meets ABYC A-24 Standard - CARBON MONOXIDE DETECTION SYSTEMS Listed to UL 2034 Carbon Monoxide Alarms – Marine Use Meets ISO: 12133 Small craft - Carbon Monoxide (CO) detection systems Works in extreme temperatures - Only marine CO alarm listed to operational temperatures of -40° F to 158° F. Alarm has consistently held up in the excessive cold and heat due to high quality sensor No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating Low Current Draw. Innovative micro current circuit saves battery power for the boater. 60 milliamp (.06 amp.) current draw Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. Alarm will reactivate if it still senses dangerous levels of CO End of Life Signal alerts boater to replace the alarm after 5 years of service Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory

4368 Water Resistant USB Accessory Panel - 12V Socket, 2x 2.1A Dual USB Chargers, Mini Voltmeter Easy to install accessory panels include a 15A circuit breaker switch and pre-wired harness.  Panels offer customizable 12V charging and monitoring options. Features: Pre-wired harness included in all panels for easy installation Silicon breaker boots and gasket protects against water ingress Illuminated Carling Technologies 15A circuit breaker switch allows the ability to shut off panel preventing parasitic draw Polycarbonate/ABS panel face is UV-stabilized, flame retardant, and will not corrode 12V DC only Specifications: Positions: 1 Nominal Voltage: 12V DC

Weekend Series™ Backpack - 3700 Series Most anglers work hard all week. Days off and more important days out fishing are why most of us work in the first place. Weekend anglers deserve the same quality and organization as professional anglers that can hit the water every day. The Plano Weekend Series was designed for the serious angler that wants to make the most of their quality fishing time. Features: Heavy-duty molded main compartment zipper Water-resistant felt lined sunglass pocket Front pocket with laser-cut mole tool holder Padded shoulder straps with sternum strap Mesh side pockets Oversized molded zippers Dimensions: 12.75" x 7.25"W x 18"H

Marine Plumbing & Ventilation The plumbing and ventilation systems are two of the most important aspects of your boat. It is very important that any toilet facilities work properly, and you also need to ensure that there is adequate ventilation for the engine and to remove any fumes that can build up in passenger compartments or similar areas. With our marine plumbing and ventilation parts and accessories, you have what you need all in one place, right at your fingertips. From air conditioning & refrigeration supplies to bilge pumps, fans, and hot water heaters, we have it all under one roof.   We carry several brands and can offer Livewell pumps and transfer pumps, along with several marine sanitation options. Portable toilets are an excellent choice for boats that are large enough to accommodate them, but the comfort of your passengers is not the only thing to be aware of. You also need to make sure you have adequate engine cooling pumps, and that any washdown / pressure pumps work correctly. With a WaterMaker pump, quality fittings, and the right blowers & heaters for your boat, you can ensure that your boat will operate correctly and your passengers will have the comfort and convenience they need.

March Mag-Drive Centrifugal Pumps Bronze Center Inlet 12VDC 5.5GPM     The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated. • Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries. • Maximum liquid temperature for the 809 and 815 series is 250 F. • Port configurations include in-line and center inlet with side discharge. • Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic. • There are many motor options available Including AC, DC and High Speed versions for added flow.     March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 12VDC 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet  

March 809 BRC HS 12VDC Mag-Drive Pump March Mag-Drive Centrifugal Pumps Bronze 12VDC High Speed 5.5GPM   The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated. • Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries. • Maximum liquid temperature for the 809 and 815 series is 250 F. • Port configurations include in-line and center inlet with side discharge. • Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic. • There are many motor options available Including AC, DC and High Speed versions for added flow.   March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 12VDC High Speed 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet