Ultima Bilge Pump UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port. For UltimaBilge 1250GPH we include threaded 1.1/4" & 1.1/8" discharge port. All version are delivered with a removable check valve. The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 51 l/min - 800 GPH Capacity straight (13.6 V): 79 l/min - 1250 GPH Amperage: 3 A Fuse Size: 5 A Connection: 1-1/8" and 1-1/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:117 mm - 4.6" Weight:0.66 kg - 23.3 oz.

Ultima Bilge Pump UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port. All version are delivered with a removable check valve. The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 32 l/min - 500 GPH Capacity straight (13.6 V): 38 l/min - 600 GPH Amperage: 2.5 A Fuse Size: 5 A Connection: 3/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:105 mm - 4.1" Weight:0.66 kg - 23.3 oz.

Ultima Bilge Pump UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port. All version are delivered with a removable check valve. The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 38 l/min - 600 GPH Capacity straight (13.6 V): 51 l/min - 800 GPH Amperage: 3 A Fuse Size: 5 A Connection: 3/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:105 mm - 4.1" Weight:0.66 kg - 23.3 oz.

Ultima Bilge Pump UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port. All version are delivered with a removable check valve. The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one unit Integrated Ultima Switch sensing right into the pump body No Mercury Removable clip on basket design Removable impeller cover allows for easy clean out 3-wire device can be run in auto or manual override mode No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Pump Body: ABS Shaft Seal: Lip Seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 44 l/min - 700 GPH Capacity straight (13.6 V): 64 l/min - 1000 GPH Amperage: 3.2 A Fuse Size: 5 A Connection: 3/4" Length:142 mm - 6" Width:82 mm - 3.2" Height:105 mm - 4.1" Weight:0.66 kg - 23.3 oz.

500 GPH Ultima Combo Automatic Submersible Bilge Pump 12V Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump. CE-Approved Features: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 3/4" Includes Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 33 l/min - 525 GPH Capacity straight (13.6V/27.2V): 40 l/min - 630 GPH Amperage: 2.5 A Fuse size: 5 A Connection: 3/4" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 14.4 oz.

Johnson 32-47261-002 Ultima Bilge 1250 Gph  

Cartridge Bilge Pump 1250 GPH The 1250 GPH incorporate some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one motor/impeller unit No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 60 l/min - 952 GPH Capacity Straight: 73 l/min - 1150 GPH Amerpage: 3 A Fuse Size: 5 A Connection: 1 1/8"" Max Height: 112 mm - 4.4" Weight: 0.32 kg - 10.4 oz.

Cartridge Motor 1250 GPH - 24V Upgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier.

Heavy Duty Bilge Pump 1600 series 12v: The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included. CE-Approved Features: Heavy duty, 12-pole double ball bearing motor Liquid cooled for extended motor life Quality engineered mechanical/lip seal ISO 8849 Marine and CE standards Easily interchangeable with most similar bilge pumps Pump body: Thermoplastic Shaft seal: Mechanical seal Shaft: Stainless steel (SS2343) Voltage: 12 V Capacity 1.0 m head (13.6 V/27 V): 98 l/min - 1550 GPH Capacity straight (13.6 V/27 V): 100 l/min - 1600 GPH Amperage: 7 A Fuse Size: 10 A Connection: 1-1/8" and 1-1/4" Shaft: SS2343 Wire size: 1.3 mm2 - 16 GA Max height 149 mm - 5.86" Weight 1.3 kg - 2.75 lbs

Heavy Duty Bilge Pump 2200 series 12v The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included. CE-Approved Features: Heavy duty, 12-pole double ball bearing motor Liquid cooled for extended motor life Quality engineered mechanical/lip seal ISO 8849 Marine and CE standards Easily interchangeable with most similar bilge pumps Pump body: Thermoplastic Shaft seal: Mechanical seal Shaft: Stainless steel (SS2343) Voltage: 12 V Capacity 1.0 m head (13.6 V/27 V): 120 l/min - 1900 GPH Capacity straight (13.6 V/27 V): 130 l/min - 2060 GPH Amperage: 7.5 A Fuse Size: 12 A Connection: 1-1/8" and 1-1/4" Shaft: SS2343 Wire size: 1.3 mm2 - 16 GA Max height 177 mm - 7" Weight 2.7 kg - 6 lbs

Twin Port Pumps 1250 GPH Offers the convenience of using only one intake for both the livewell and raw water wash down pump. The 3/4" tapered inlet connects directly to the sea cock and the upper outlet port provides a continuous flow of water through the 1-1/8" discharge to livewell. Does not include Dura-Port. while the lower outlet port connects to the wash down pump through either a 1/2" or 3/4" ports. High pressure inlet seal easily handles the higher pressures created by high speed pickups commonly used.

Jabsco Flexible Impeller Pedestal Pump Ped Mt Neo Imp 1 1/4" FEATURES Pump Body: Bronze pedestal Port Size: 1-1/4" (32mm) NPT Internal Horizontal ports on 6400-Series Vertical ports on 7420-Series Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: 316 Stainless Steel Standard shafts extend 2 5/16" from pump Short shafts extend 1 5/16" from pump for use on Caterpillar Engines Bearings: Pre-lubricated Double Row Ball     APPLICATIONS / CHARACTERISTICS MARINE: Pumping bilges, Washdown, Engine Cooling.     INDUSTRIAL: Circulating and Transferring liquids; Velocity-mixing; Transferring soap, liquors, pastes, glues, glycerine, lotions and brine.   FARM: Pumping water for stock and poultry houses and Booster Pumping.   PLUMBING & HOME: Pumping out flooded basements, cesspools, sumps and many other uses.    Jabsco Flexible Impeller Pedestal Pump 1 1/4"NPT Full Cam Neoprene Impeller

Threaded Discharge Port - 1-1/8" Features: 1-1/8" Threaded Discharge Port

Oberdorfer 109MB Series Centrifugal Pump FEATURES Pump Body: Bronze Ports: Inlet: 1 1/4" NPT Outlet: 1" NPT Flow: 80 GPM Max Pressure: to 19 PSI, 45 feet of head Impeller: Centrifugal Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available. Shaft: 416 Stainless Steel is standard, Monel Shaft available for Marine Use Motor / Drive: Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you.     APPLICATIONS / CHARACTERISTICS BRONZE CLOSE COUPLED CENTRIFUGAL PUMP This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.   Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.     109MB-1-J26 is Oberdorfer- Centrifugal Pump 1/2HP ODP 115/230V Monel Shaft    

Aqua Void 500 GPH Bilge Pump - 12V With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void. Experience the Industry-First Quick-Change Motor Connection Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades. Take Control of the Boating Experience with Unparalleled Convenience The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection. Enjoy Enhanced Efficiency and Higher Flow Rate Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption. Trust in Reliable Performance Under Demanding Conditions Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering. Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today! Features: Heightened efficiency with an increased flow rate - high-flow impeller design  Quick-change motor connection enjoys quick and hassle-free cartridge motor changes or capacity upgrades. Industry-first and only cartridge motor pump with included harness connection requiring no cutting and splicing of wires Water-cooled motor for long service intervals Compact, all-in-one motor/Impeller unit with stainless steel (316) Shaft No tools are needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  Easy-to-install dura-port discharge ports to eliminate stress cracking caused by over-tightened hose clamps Include both a straight and a 90-degree smooth elbow dura-port as well as a removable check valve Meets the international standard, ISO 8849 marine Molded T-Slot - Easy Installation with Switches Specifications: Pump Size: 500 GPH Capacity Straight (12V): 600 GPH (38 I/min) Voltage: 12V Amp: 2.7A Fuse: 3.5A Hose Connection: 3/4 in. Wire Size: 16 GA, TAC Weight: 11.2 oz (0.32 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)