443 D-Ring w/3" Stick-On Accessory Mount Use the Scotty Flexible D-Ring in conjunction with a strap, cord, or bungee to secure anything from a cooler, paddle, drybag or anything else. WARNING: This product can expose you to chemicals including Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

7" Stainless Clamp-On Accessory Mount  Edson's 7" Stainless Clamp On Accessory Mount allows you to mount drink holders, instruments or nearly anything else that requires a secure location on the pedestal guard.   For angled guards, they rotate and lock in place with set screws so you can mount your drink holder level or adjust the angle of your instrument. Highly polished solid 316 Stainless construction with adapter sleeves for 1", 1-1/8" and 1-1/4" guard pipes.

3" Stainless Clamp-On Accessory Mount Edson's 3" Stainless Clamp On Accessory Mount allows you to mount drink holders, instruments or nearly anything else that requires a secure location on the pedestal guard.   For angled guards, they rotate and lock in place with set screws so you can mount your drink holder level or adjust the angle of your instrument. Highly polished solid 316 Stainless construction with adapter sleeves for 1", 1-1/8" and1-1/4" guard pipes.

Leather Case with Swivel Belt Loop & D-Ring for F52D, M85 & M85IS Features: Includes a swivel belt loop and D-ring For Icom IC-F52D and IC-M85 radios

SHURflo 2088-443-144, Diaphragm Pump 3.5 GPM 12VDC SHURflo Diaphragm Pump Standard, 3.5 GPM Open Flow, 12VDC Intermittant Duty, Santoprene Valves, Santoprene Diaphragm, 45 PSI Demand Switch (adjustable 30-50 PSI), 1/2" MSPT Ports, Polypropylene Housing

SHURflo 8000-443-136, Diaphragm Pump 3 Chamber 1.8 GPM 12VDC SHURflo Diaphragm Pump 3 Chamber, 1.8 GPM Open Flow, 12VDC Continuous Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), EPDM Valves, Santoprene Diaphragm, Polypropylene Housing, 1/2"-14 Male Parallel Thread Ports. Typical Application: Soil Extraction, Carpet Cleaning, Water Delivery

SHURflo 8000-443-236, Diaphragm Pump 3 Chamber 1.75 GPM 12VDC The 8000 Series diaphragm pump is SHURflo's most widely used pump with spherically shaped valves and automatic demand switch, these pumps are the pump of choice for applications requiring consistent, dependable operation and priming.   SHURflo Diaphragm Pump 3 Chamber, 1.75 GPM Open Flow, 12VDC Continuous Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), EPDM Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports.   Typical Application: Water Delivery

March 0151-0046-0300-3.06 Kynar Imp Mag Assy W/3.06  

Imp Mag Assy W/3.50 Trim Quantity limited. Please contact us for replacement information.

Bait Board The Scotty Bait Board is the ultimate multi-purpose workspace for all your tool, tackle, and gear prep needs. Quickly mount the Bait Board to any of our post mounts, enabling storage for all of your fishing favorites with the built-in lure and accessory rack. Quick and easy access to everything you need is now conveniently at your finger tips. Exterior tray walls let you cut bait and prep lures in a tidy, contained space. Keep knives, pliers, hook sharpeners and other sharp objects organized in between use for added safety. You can easily customize your Bait Board to the right height and angle by attaching any Scotty adjustable extender, such as the 429 Gear Head Mount Extender. Mount the durable board to your kayak with our 453 Gimbal Mount Adapter. The Bait Board comes with a universal post base, to fit any of our Rod Holder Mounts and Adapters. So go ahead and speed through the prep work. Spend more time fighting the fish, and not the fishing gear! ( Extenders, Camera Mount, Fish Finder Mount, Cup Holder and accessories sold seperately.) Board Dimensions: 9.5" x 12.25" x 1.75"

327 Fender Ring - 2-Pack Use these Scotty 327 Fender Rings to quickly attach lines and accessories to your Scotty rod holder mounts. Easy to insert and remove. Features: 2-Pack Inside Diameter of Ring: 7/8" Mounting Bracket not included

448 Stick-On Mount w/Gear-Head Adapter - 3" Pad With 3MT VHBT Tape. Use with all Scotty post mount accessories. Pair with all Scotty post mount accessories. Position your rod holder or Scotty accessory virtually anywhere on your SUP or flush kayak/boat surface. The attached Gear-Head mount allows you to quickly change rod holder positions with a simple twist. A non- permanent solution for mounting Scotty products to your watercraft and getting you out there! WARNING: This product can expose you to chemicals including Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.

Triple Rod Holders Scotty's fully-adjustable multiple rod holder comes with a built-in lure and accessory rack, which gives you quick access to your lures and tools. Includes No. 241 combination deck or side mount. Made from fibre reinforced engineering nylon. Includes 3 No. 230 Power Lock rod holders WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

MEGA Live Imaging TargetLock & MEGA 360 Imaging Ultrex Accessory Mount - 80lb, 45" This accessory mount is used to increase the effect of lift assist for anglers who choose to mount both Humminbird Mega Live Imaging TargetLock and Mega 360 Imaging to their trolling motor. The bracket serves as a direct replacement for the existing Ultrex bracket. Designed for 24V Ultrex™ motors with a shaft length of 45”.  Features: Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ as well as Humminbird MEGA 360 Imaging™ Reduces effort required for motor stow and deploy Designed for 24V Ultrex™ motors with a shaft length of 45”

MEGA Live Imaging TargetLock & MEGA 360 Imaging Ultrex Accessory Mount - 80-112lb, 52" This accessory mount is used to increase the effect of lift assist for anglers who choose to mount both Humminbird Mega Live Imaging TargetLock and Mega 360 Imaging to their trolling motor. The bracket serves as a direct replacement for the existing Ultrex bracket. Designed for 24V or 36V Ultrex™ motors with a shaft length of 52”. Features: Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ as well as Humminbird MEGA 360 Imaging™ Reduces effort required for motor stow and deploy Designed for 24V or 36V Ultrex™ motors with a shaft length of 52”