|
Stainless Steel Flush Mount Rod Holder, Standard Series
2" Diameter
7.5" Length
Attwood stainless steel rod holders meet the need for the finest in finish, function and durability.
Polished 316 grade stainless steel tube for corrosion-resistance
Gasket Provides water seal around flange
Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use
U.V. resistant polymer liner protects finish on rod or reel
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.40 |
|
|
Stainless Steel Flush Mount Rod Holder, Standard Series
2" Diameter
7.5" Length
Attwood stainless steel rod holders meet the need for the finest in finish, function and durability.
Polished 316 grade stainless steel tube for corrosion-resistance
Gasket Provides water seal around flange
Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use
U.V. resistant polymer liner protects finish on rod or reel
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.40 |
|
|
Stainless Steel Flush Mount Rod Holder, Standard Series
2" Diameter
7.5" Length
Attwood stainless steel rod holders meet the need for the finest in finish, function and durability.
Polished 316 grade stainless steel tube for corrosion-resistance
Gasket Provides water seal around flange
Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use
U.V. resistant polymer liner protects finish on rod or reel
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
39.40 |
|
|
Stainless Steel Flush Mount Rod Holders - Closed End
2" Diameter
9" Length
Attwood stainless steel rod holders meet the need for the finest in finish, function and durability.
Polished 316 grade stainless steel tube for corrosion-resistance
Gasket Provides water seal around flange
Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use
U.V. resistant polymer liner protects finish on rod or reel
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
41.99 |
|
|
Stainless Steel Flush Mount Rod Holder, Standard Series
2" Diameter
7.5" Length
Attwood stainless steel rod holders meet the need for the finest in finish, function and durability.
Polished 316 grade stainless steel tube for corrosion-resistance
Gasket Provides water seal around flange
Optional, U.V. resistant, Cover Cap/Gasket closes tube when not in use
U.V. resistant polymer liner protects finish on rod or reel
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
33.59 |
|
|
LED RGB Rod Holder with Tube Insert
These LED RGB Rod Holders to have translucent tube inserts with bright RGB LEDs and a 30° angle. Or retrofit your existing rod holder with the LED RGB Tube Insert (325189, sold separately). Just remove your existing liner, install the LED RGB Tube Insert, and cut to your mounting face angle. A Bluetooth Smart Phone Controller (403051-1, sold separately) lets you operate this RGB LED Rod Holder from your smartphone (IOS 6 or Android 4.0 and above). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes. Add multiple LED RGB rod holders with an optional terminal block (426624, sold separately).
Specifications:
Constructed of formed 304 stainless steel
Patented
Watts: 2.6W
Voltage: 12V
|
67.98 |
|
|
Heavy Duty Pro Series Rod Holders
The Pro Series line of molded rod holders takes the Pro Series to the next level with the addition of the Combo Mount. All the Pro-Series unique features you've come to expect, with the ability to mount in multiple configurations.
Designed for use with casting and spinning rod holders. Heavy-duty, deep-tooth gear lock securely holds rod holder in mounting base.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
24.44 |
|
|
Large Stainless Steel Bolt-less Rod Holder - 30°
2020 IBEX Innovation Award Winner. This patent-pending rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
151.67 |
|
|
70 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner - Boxed
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.
Features:
316L stainless steel
Fits 2-3/16 in. hole diameter
Cast models feature a ½ in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Includes a backing plate and installation nut
Installation requires Model # 53679 Installation Socket
Specifications:
Degrees: 30 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-5/8 in.
Outer Diameter: 2-1/8 in.
Cap Size: 4-1/2 in. long x 3-5/8 in. wide
Tube Length: 9 in.
|
111.79 |
|
|
80 Series Screwless Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.
Features:
316L stainless steel
Fits 2-9/16 in. hole diameter
Cast models feature a ½ in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Includes a backing plate and installation nut
Installation requires Model # 53679 Installation Socket
Specifications:
Degrees: 30 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-7/8 in.
Outer Diameter: 2-5/8 in.
Cap Size: 5-1/8 in. long x 4-1/4 in. wide
Tube Length: 10 in.
|
159.31 |
|
|
70 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Gimbal Bar Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. A built-in gimbal bar on the open bottom allows water to drain and prevents the rod from spinning.
Features:
316L stainless steel
Fits 2-3/16 in. hole diameter
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Specifications:
Degrees: 30 degrees
Bottom Style: Bar
Liner Color: Black
Inner Diameter: 1-5/8 in.
Cap Size: 4-1/2 in. long x 3-5/8 in. wide
Tube Length: 9 in.
Gimbal Bar: ¼ in. wide x ½ in. tall
|
67.14 |
|
|
70 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.
Features:
316L stainless steel
Fits 2-3/16 in. hole diameter
Cast models feature a 1/2 in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Specifications:
Degrees: 30 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-5/8 in.
Cap Size: 4-1/2 in. long x 3-5/8 in. wide
Tube Length: 9 in.
|
76.12 |
|
|
80 Series Standard Flush Mount Rod Holder - 30 Degree - Stainless Steel - Cast Bottom - Black Liner
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength. This model has a durable, rounded cast bottom with a hole to drain water.
Features:
316L stainless steel
Fits 2-1/2 in. hole diameter
Cast models feature a ½ in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Specifications:
Degrees: 30 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-7/8 in.
Cap Size: 5-1/8 in. long x 4-1/4 in. wide
Tube Length: 10-1/2 in.
|
127.76 |
|
|
Backing Plate for 70 Series Rod Holders
Backing plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders, or perhaps even tear through, causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and one for 80 series rod holders. Each size fits all 3 models of the series.
Features:
Use this backing plate for all 70 series rod holders (53670A, 53670CA, 53671A, 53671CA, 53672A, and 53672CA)
316L cast stainless steel
4" x 5-1/4"
4mm thick
Use your 1/4" stainless bolts and nuts (hardware not included)
|
25.01 |
|
|
Backing Plate for 80 Series Rod Holders
Backing plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and 80 series rod holders. Each size fits all 3 models of the Series.
Features:
Use this backing plate on all 80 series rod holders (53680CA, 53680SA, 53681CA, 53681SA, 53682CA, and 53682SA)
316L cast stainless steel
4-1/4" x 6"
4mm thick
Use your 1/4" stainless bolts and nuts (hardware not included)
|
28.88 |
|