|
Removable Rail Mounted Kayak/SUP Rack - 17.5" *Case of 3*
No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water. With Magma’s Kayak/SUP Boat Rack your problems are solved.
This convenient storage rack easily attaches to straight or tapered, vertical or diagonal rails and is constructed from 1” Dia., 304 Marine Grade Mirror Polished Stainless Steel tubing and attachment hardware. Designed to fit rails from 7/8” (22 mm) to 1-1/2” (38 mm) in diameter and is wide enough to fit all of the most popular kayak or board sizes.
Magma’s exclusive quick release knob system allows each arm to be instantly rotated out of the way when not in use or swung in tighter to fit smaller/narrower kayaks or boards. Each arm comes with pre-installed UV resistant padding and has two tie-down points for attaching securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.
Whether you’re new to water sports or a seasoned veteran, this rack is a must have for every paddling enthusiast.
Features:
Fits straight and tapered, vertical or diagonal rails from 7/8" (22 mm) to 1-1/2" (38 mm) diameter
Instantly adjusts without tools to fit kayaks, SUP's, and other water toys
Folds flat along rail when not in use or easily remove from rail without tools for compact storage
Each arm has (2) heavy duty Stainless Steel adjustable rail brackets with adjustable knobs and Stainless Steel hardware
Each arm includes pre-installed UV resistant foam padding and (2) Stainless Steel tie-down end loops
Technical Specifications:
Material - 304 Marine Grade Mirror Polished Stainless Steel
Weight - 9.4 lbs (4.27 kg) per pair
*Sold as a Case Pack of three (3) Pairs
|
1007.96 |
|
|
Removable Rail Mounted Kayak/SUP Rack - 17.5"
No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water. With Magma’s Kayak/SUP Boat Rack your problems are solved.
This convenient storage rack easily attaches to straight or tapered, vertical or diagonal rails and is constructed from 1” Dia., 304 Marine Grade Mirror Polished Stainless Steel tubing and attachment hardware. Designed to fit rails from 7/8” (22 mm) to 1-1/2” (38 mm) in diameter and is wide enough to fit all of the most popular kayak or board sizes.
Magma’s exclusive quick release knob system allows each arm to be instantly rotated out of the way when not in use or swung in tighter to fit smaller/narrower kayaks or boards. Each arm comes with pre-installed UV resistant padding and has two tie-down points for attaching securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.
Whether you’re new to water sports or a seasoned veteran, this rack is a must have for every paddling enthusiast.
Features:
Fits straight and tapered, vertical or diagonal rails from 7/8" (22 mm) to 1-1/2" (38 mm) diameter
Instantly adjusts without tools to fit kayaks, SUP's, and other water toys
Folds flat along rail when not in use or easily remove from rail without tools for compact storage
Each arm has (2) heavy duty Stainless Steel adjustable rail brackets with adjustable knobs and Stainless Steel hardware
Each arm includes pre-installed UV resistant foam padding and (2) Stainless Steel tie-down end loops
Technical Specifications:
Material - 304 Marine Grade Mirror Polished Stainless Steel
Weight - 9.4 lbs (4.27 kg)
*Sold as a Pair
|
335.99 |
|
|
Removable Rail Mounted Kayak/SUP Rack - Wide - 20"
No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water. With Magma’s Kayak/SUP Boat Rack your problems are solved.
This convenient storage rack easily attaches to straight or tapered, vertical or diagonal rails and is constructed from 1” Dia., 304 Marine Grade Mirror Polished Stainless Steel tubing and attachment hardware. Designed to fit rails from 7/8” (22 mm) to 1-1/2” (38 mm) in diameter and is wide enough to fit all of the most popular kayak or board sizes.
Magma’s exclusive quick release knob system allows each arm to be instantly rotated out of the way when not in use or swung in tighter to fit smaller/narrower kayaks or boards. Each arm comes with pre-installed UV resistant padding and has two tie-down points for attaching securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.
Whether you’re new to water sports or a seasoned veteran, this rack is a must have for every paddling enthusiast.
Features:
20" (50.8 cm) Wide rack arms can now hold up to 3 standard SUP's
Fits straight and tapered, vertical or diagonal rails from 7/8" (22 mm) to 1-1/2" (38 mm) diameter
Instantly adjusts without tools to fit kayaks, SUP's, and other water toys
Folds flat along rail when not in use or easily remove from rail without tools for compact storage
Each arm has (2) heavy duty Stainless Steel adjustable rail brackets with adjustable knobs and Stainless Steel hardware
Each arm includes pre-installed UV resistant foam padding and (2) Stainless Steel tie-down end loops
Technical Specifications:
Material - 304 Marine Grade Mirror Polished Stainless Steel
Weight - 10.4 lbs (4.72 kg)
*Sold as a Pair
|
359.99 |
|
|
Adjustable All-Angle Fish Rod Holder Mounted Kayak/SUP Rack
No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water.
With Magma’s Fish Rod Holder Mounted Removable Kayak / SUP Rack your problems are solved. This convenient storage rack, easily attaches to most standard fish rod holders, has been constructed from 1” Dia., 304 marine grade Stainless Steel tubing, aircraft quality hard anodized 356 aluminum, and includes stainless steel attachment fasteners.
Designed to fit most standard fish rod holders up to 1-1/2” (38mm) inside diameter and is wide enough to fit all of the most popular kayak or board sizes. Magma’s patented LeveLock® all-angle adjustable mounting bracket and the Pow’rGrip adjustable quick release rod holder system allows each arm to be instantly installed and adjusted without tools. Each arm comes with pre-installed UV resistant padding and has two tie-down attachment points for securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.
Whether you’re new to water sports or a seasoned veteran, this rack is a must have for the paddling enthusiast who’s always on the go.
Features:
Holds a single kayak or 2 or more standard SUP’s
Allows quick installation or removal without tools for convenient storage
Technical Specifications:
Material - 304 Marine grade Stainless Steel
Bracket Height (w/o mount) - 26.84" (68.18 cm)
Weight (Pair) - 12.4 lbs (5.63 kg)
*Sold as a Pair
|
419.99 |
|
|
Knob & Nylon Washer
Replacement knob and nylon washer.
Compatible With:
T10-449B-HDP Cleaning station
T10-591 Horizontal Round rail mount
R10-626 Rail-mounted kayak/SUP rack
*Sold as an Individual
|
13.54 |
|
|
Rail Mount Horseshoe Buoy Bracket
The Sea-Dog® Rail Mount Horseshoe Buoy Bracket can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware. Made from marine grade stamped aluminum and powder coated for a long-lasting finish.
|
37.02 |
|
|
Rail Mount Ring Buoy Bracket
The Sea-Dog® Rail Mount Ring Buoy Bracket can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware. Made from marine grade stamped aluminum and powder coated for a long-lasting finish.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.60 |
|
|
Two Sided Floor/Dock Upright Rack System
No more lugging around your heavy kayak or paddleboard after a long day on the water.
With Magma’s two-sided Kayak/SUP Storage Rack System your problems are solved. This rack has been specifically designed for marinas and resorts or the residence with a large assortment of water toys that require easy convenient storage and accessibility.
Building the rack system is simple; start with the base rack and purchase the specific arms (sold separately) that best fit your needs. Fully assembled this rack holds up to 8 Kayaks or 10+ SUP’s or any combination of both. The base rack is designed to be mounted directly to any dock or flat surface. Constructed with 1-1/2” Dia. 304 Mirror Polished Marine Grade Stainless Steel tubing, each vertical uprights has adjustment holes spaced 2” apart for maximum storage capacity.
Rack and components include pre-installed UV resistant polyethylene foam pads, Stainless Steel mounting/attachment fasteners, and stainless steel tie-down end loops for using securing straps or a cable lock to safely secure items in the rack.
Whether you’re new to water sports or a seasoned veteran this rack system is a must have for every water activity enthusiast.
*Arms sold separately
Features:
Mount To Any Dock or Flat Surface
Custom build your rack using various combinations of arms
Arms adjust every 2" to maximize storage capacity
Base arms include Stainless Steel tie-down Loops and Preinstalled UV Resistant Polyethylene Foam Pads
Includes Stainless Steel hardware
Technical Specifications:
Material - 304 Mirror Polished Marine Grade Stainless Steel
Dimensions (Height) - 60-7/16" (153.48 cm)
Weight - 39 lbs (17.70 kg)
*Sold as an Individual
|
306.95 |
|
|
Fillet & Prep Table Rail Mount Adapter Plate w/Hardware
Fillet Table Rail Mount Adapter Plate works on the 326580-3 and 326585-3 fillet tables and comes complete with hardware to mount the plate to the table. Accepts the 327199-1 Removable Rail Mount Clamp (sold separately).
|
29.94 |
|
|
140 Kayak/SUP Transducer Mounting Arm f/Post Mounts
Kayak/Sup Transducer Mounting Arm made of high strength composite material that will give you years of service - withoutany corrosion problems. Also included is the 415 Slip Discs that offer micro adjustments when needed. The Scotty Transducer mount telescopes from a compact 11.5" to 18" when fully extended and swivel 360°. Includes the ever popular Scotty post mount that fi ts into any Scotty Rod Holder mount.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
21.37 |
|
|
Torque™ 1-1/8" - 1-1/2" Diameter Handlebar/Rail Base with C Size 1.5" Ball
The RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 1-1/8” to 1-1/2” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments.
Mounting Base Dimensions:
Accommodates rails 1 1/8" to 1 1/2" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball "C" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
22.85 |
|
|
ROKK Mini Rail Mount
Rail Mount Base that fits a wide range of rails.
Compatible with:
Rails from .75" to 1.25" (19 to 34mm)
*Sold as an Individual
|
24.13 |
|
|
Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with C Size 1.5" Ball
The RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 3/4” to 1” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments.
Mounting Base Dimensions:
Accommodates rails 0.75" to 1" in diameter
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball "C" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
22.90 |
|
|
March TE-7K-MD 3.5" 3PH 3Ph 3/4 Hp 3.5" Imp Pump
|
1299.60 |
|
|
No Slide Metal/Composite Bonder - Case of 10
Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping.
Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used.
Features:
Revolutionary Adhesive
Parts Stay Where Placed Without Sliding
For Use Overhead and on Vertical Surfaces
No Need for Fixtures
Case of 10
|
298.64 |
|