|
SUPRAX SUP Board Pontoon Mount
Free up deck space on your pontoon boat with the SurfStow SUPRax Stand-Up Paddleboard Storage System. SUPRax is designed from durable aluminum alloy and anodized for strength. Heat-pressed, die-cut EVA protective foam protects your board from damage while in storage. Heavy-duty shock cords keeps your SUP board in place.
** This product is a tension mount installation and it only works on pontoon rails that are "completely" square. Please note some of the newer pontoon boats do not have completely square railings. These racks WILL NOT fit those style rails. **
Features:
Pontoon mount fits 7/8", 1" and 1-1/4" rails
Easy to install
Accomodates all SUP board shapes and sizes
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
359.92 |
|
|
SUPRAX XL Kayak/2 SUP Storage System with Pontoon Mount
*The product is a tension mount installation and it only works on pontoon rails that are “completely” square. Please note some of the newer pontoon boats do not have completely square railings. These racks WILL NOT fit those style rails.*
Features:
Store that big kayak securely, and safely, on the side of your Pontoon boat with YAKRAX
Get your kayak to its destination, in style
Free up deck space
The rotating clamp allows for secure mounting on angled stanchions
Secure your kayak to your boat and your wall with optional wall mounts
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
385.63 |
|
|
SUPRAX Replacement Square Pontoon Rail Clamp
One replacement SUPRAX clamp for pontoon boats. *This item is a tension mount installation and it only works on pontoon rails that are “completely” square. Please note: some of the newer pontoon boats do not have completely square railings. These rail claims WILL NOT fit those style rails.*
Fits up to 1-5/8" in width.
|
51.35 |
|
|
140 Kayak/SUP Transducer Mounting Arm f/Post Mounts
Kayak/Sup Transducer Mounting Arm made of high strength composite material that will give you years of service - withoutany corrosion problems. Also included is the 415 Slip Discs that offer micro adjustments when needed. The Scotty Transducer mount telescopes from a compact 11.5" to 18" when fully extended and swivel 360°. Includes the ever popular Scotty post mount that fi ts into any Scotty Rod Holder mount.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
21.37 |
|
|
RAM Single Arm Ball Mount Horizontal
The RAM single swing and socket arm mount includes a 6" STRAIGHT swing arm mounted on a horizontal surface mounting base. At the end of the mount is a rectangular 6.25" x 2" top base. The pivoting point of the rectangle base allows 180 degree rotation, the swing arm allows a 360 degree rotation.
RAM Marine Electronic Mounts Page
RAM-109HSB Dimensions
A. Center of knob to center of ball socket: 6"
B. Overall length of swing arm assembly: 10.75"
C. Height from base to top of knob: 4.89"
Part number reflects product packaged in clear clam shell for store shelf display. For additional specifications, see components and drawings tabs.
Ball Size: 1.5 Inch Rubber Ball
Material: Powder Coated Marine Grade Aluminum
Color: Black Powder Coat
|
72.46 |
|
|
RAM Flat Surface Horizontal Single Swing Arm Mount
The RAM single swing arm mount consists of a 6" long BENT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation.
Dimensions:
Center of knob to center of ball socket: 6"
Overall length of swing arm assembly: 10.75"
Overall height: 5.6"
Height from base to top of knob: 4.91"
Material:
Powder Coated Marine Grade Aluminum
Note:The "U" in the part number reflects product packaged in poly bag. The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
62.81 |
|
|
Alternator 250 AMP 12V 1-2" Single Foot Spindle Mount K6 Pulley
Alternator, XT Series, 250A, 12V, Spindle Mount (Single Foot), 1-2in, K6 Serpentine Pulley, Case Ground
1" Motorola-Style Mounting; Typical for Westerbeke, Lehman, Hino & Pathfinder Engines
2" Delco-Style Mounting; Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines
Replaces: AT-SF-200-12-IG, AT-SF-200-K6
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1183.45 |
|
|
Series 20 Ball Bearing Block - Single - Cheek Rivet Mount
Features:
Low friction
High static and dynamic load capacity
Lightweight
Suitable for screw or pop rivet mounting
Precision molded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction
Applications:
Dinghy control lines
Dinghy Vangs
Cunninghams
Traveller controls
Materials:
U.V. Stabilized Acetal sheaves
Stainless steel ball bearings
Grade 316 stainless steel load strap and head fitting
Impact and UV resistant, fiber reinforced Nylon cheeks
Specifications:
Sheave Ø: 20mm(3/4")
Max. Rope Ø: 6mm(1/4")
M.W.L.: 200kg(440lbs)
B. L.: 550kg(1,210lbs)
Weight: 17g(0.6oz)
|
16.27 |
|
|
Single Lever Top Mount Control w/Neutral Lock & Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
515.33 |
|
|
Single Lever Top Mount Control w/Neutral Lock & Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
515.33 |
|
|
Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
449.68 |
|
|
Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
442.22 |
|
|
Alternator 120 AMP Kit 12V 1-2" Single Foot Spindle Mount J10 Pulley Regulator & Temp Sensor
Kit Includes: 621-120-J10 Alternator, MC-614 Regulator, Temperature Sensors, Mounting Hardware
621-120-J10 Alternator: 120A, 12V, Spindle Mount (Single Foot), 1-2in, J10 AltMount Serpentine Pulley, Isolated Ground
1" Motorola-Style Mounting; Typical for Westerbeke, Lehman, Hino & Pathfinder Engines
2" Delco-Style Mounting; Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines
Replaces: 621-VUP-MC-120-SR-KIT
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
982.90 |
|
|
Alternator 120 AMP 12V 1-2" Single Foot Spindle Mount Dual Vee Pulley Regulator & Temp Sensor
Kit Includes: 621-120-DV Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware
621-120-DV Alternator: 120A, 12V, Spindle Mount (Single Foot), 1-2in, Dual Deep Vee Pulley, Isolated Ground
1" Motorola-Style Mounting; Typical for Westerbeke, Lehman, Hino & Pathfinder Engines
2" Delco-Style Mounting; Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines
Replaces: 621-VUP-MC-120-SR-KIT
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
982.90 |
|
|
Alternator 120 AMP 12V 1-2" Single Foot Spindle Mount Dual Vee Pulley with Isolated Ground
Alternator, 621 Series, 120A, 12V, Spindle Mount (Single Foot), 1-2in, Dual Deep Vee Pulley, Isolated Ground 1" Motorola-Style Mounting; Typical for Westerbeke, Lehman, Hino & Pathfinder Engines 2" Delco-Style Mounting; Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based Engines
Replaces: 621-120-SR-IG
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
751.19 |
|