Removable Rail Mounted Kayak/SUP Rack - Wide - 20" No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water.  With Magma’s Kayak/SUP Boat Rack your problems are solved.  This convenient storage rack easily attaches to straight or tapered, vertical or diagonal rails and is constructed from 1” Dia., 304 Marine Grade Mirror Polished Stainless Steel tubing and attachment hardware.  Designed to fit rails from 7/8” (22 mm) to 1-1/2” (38 mm) in diameter and is wide enough to fit all of the most popular kayak or board sizes.  Magma’s exclusive quick release knob system allows each arm to be instantly rotated out of the way when not in use or swung in tighter to fit smaller/narrower kayaks or boards.  Each arm comes with pre-installed UV resistant padding and has two tie-down points for attaching securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.  Whether you’re new to water sports or a seasoned veteran, this rack is a must have for every paddling enthusiast.  Features: 20" (50.8 cm) Wide rack arms can now hold up to 3 standard SUP's Fits straight and tapered, vertical or diagonal rails from 7/8" (22 mm) to 1-1/2" (38 mm) diameter Instantly adjusts without tools to fit kayaks, SUP's, and other water toys Folds flat along rail when not in use or easily remove from rail without tools for compact storage Each arm has (2) heavy duty Stainless Steel adjustable rail brackets with adjustable knobs and Stainless Steel hardware Each arm includes pre-installed UV resistant foam padding and (2) Stainless Steel tie-down end loops Technical Specifications: Material - 304 Marine Grade Mirror Polished Stainless Steel Weight - 10.4 lbs (4.72 kg) *Sold as a Pair

Removable Rail Mounted Kayak/SUP Rack - 17.5"  *Case of 3* No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water.  With Magma’s Kayak/SUP Boat Rack your problems are solved.  This convenient storage rack easily attaches to straight or tapered, vertical or diagonal rails and is constructed from 1” Dia., 304 Marine Grade Mirror Polished Stainless Steel tubing and attachment hardware.  Designed to fit rails from 7/8” (22 mm) to 1-1/2” (38 mm) in diameter and is wide enough to fit all of the most popular kayak or board sizes.  Magma’s exclusive quick release knob system allows each arm to be instantly rotated out of the way when not in use or swung in tighter to fit smaller/narrower kayaks or boards.  Each arm comes with pre-installed UV resistant padding and has two tie-down points for attaching securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.  Whether you’re new to water sports or a seasoned veteran, this rack is a must have for every paddling enthusiast.  Features: Fits straight and tapered, vertical or diagonal rails from 7/8" (22 mm) to 1-1/2" (38 mm) diameter Instantly adjusts without tools to fit kayaks, SUP's, and other water toys Folds flat along rail when not in use or easily remove from rail without tools for compact storage Each arm has (2) heavy duty Stainless Steel adjustable rail brackets with adjustable knobs and Stainless Steel hardware Each arm includes pre-installed UV resistant foam padding and (2) Stainless Steel tie-down end loops Technical Specifications: Material - 304 Marine Grade Mirror Polished Stainless Steel Weight - 9.4 lbs (4.27 kg) per pair *Sold as a Case Pack of three (3) Pairs

Removable Rail Mounted Kayak/SUP Rack - 17.5" No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water.  With Magma’s Kayak/SUP Boat Rack your problems are solved.  This convenient storage rack easily attaches to straight or tapered, vertical or diagonal rails and is constructed from 1” Dia., 304 Marine Grade Mirror Polished Stainless Steel tubing and attachment hardware.  Designed to fit rails from 7/8” (22 mm) to 1-1/2” (38 mm) in diameter and is wide enough to fit all of the most popular kayak or board sizes.  Magma’s exclusive quick release knob system allows each arm to be instantly rotated out of the way when not in use or swung in tighter to fit smaller/narrower kayaks or boards.  Each arm comes with pre-installed UV resistant padding and has two tie-down points for attaching securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.  Whether you’re new to water sports or a seasoned veteran, this rack is a must have for every paddling enthusiast.  Features: Fits straight and tapered, vertical or diagonal rails from 7/8" (22 mm) to 1-1/2" (38 mm) diameter Instantly adjusts without tools to fit kayaks, SUP's, and other water toys Folds flat along rail when not in use or easily remove from rail without tools for compact storage Each arm has (2) heavy duty Stainless Steel adjustable rail brackets with adjustable knobs and Stainless Steel hardware Each arm includes pre-installed UV resistant foam padding and (2) Stainless Steel tie-down end loops Technical Specifications: Material - 304 Marine Grade Mirror Polished Stainless Steel Weight - 9.4 lbs (4.27 kg) *Sold as a Pair

Adjustable All-Angle Fish Rod Holder Mounted Kayak/SUP Rack No more tripping over your kayak or paddleboard when stored on the deck or lugging them around after a long day on the water.   With Magma’s Fish Rod Holder Mounted Removable Kayak / SUP Rack your problems are solved.  This convenient storage rack, easily attaches to most standard fish rod holders, has been constructed from 1” Dia., 304 marine grade Stainless Steel tubing, aircraft quality hard anodized 356 aluminum, and includes stainless steel attachment fasteners.  Designed to fit most standard fish rod holders up to 1-1/2” (38mm) inside diameter and is wide enough to fit all of the most popular kayak or board sizes.  Magma’s patented LeveLock® all-angle adjustable mounting bracket and the Pow’rGrip adjustable quick release rod holder system allows each arm to be instantly installed and adjusted without tools.  Each arm comes with pre-installed UV resistant padding and has two tie-down attachment points for securing straps when underway or simply use them with a cable lock to safely store your toys when at the dock.   Whether you’re new to water sports or a seasoned veteran, this rack is a must have for the paddling enthusiast who’s always on the go. Features: Holds a single kayak or 2 or more standard SUP’s Allows quick installation or removal without tools for convenient storage Technical Specifications: Material - 304 Marine grade Stainless Steel Bracket Height (w/o mount) - 26.84" (68.18 cm) Weight (Pair) - 12.4 lbs (5.63 kg) *Sold as a Pair

Knob & Nylon Washer  Replacement knob and nylon washer. Compatible With: T10-449B-HDP Cleaning station T10-591 Horizontal Round rail mount R10-626 Rail-mounted kayak/SUP rack *Sold as an Individual

Rail Mount Ring Buoy Bracket  The Sea-Dog® Rail Mount Ring Buoy Bracket can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware. Made from marine grade stamped aluminum and powder coated for a long-lasting finish. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rail Mount Horseshoe Buoy Bracket  The Sea-Dog® Rail Mount Horseshoe Buoy Bracket can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware. Made from marine grade stamped aluminum and powder coated for a long-lasting finish.

Two Sided Floor/Dock Upright Rack System No more lugging around your heavy kayak or paddleboard after a long day on the water.  With Magma’s two-sided Kayak/SUP Storage Rack System your problems are solved.  This rack has been specifically designed for marinas and resorts or the residence with a large assortment of water toys that require easy convenient storage and accessibility.   Building the rack system is simple; start with the base rack and purchase the specific arms (sold separately) that best fit your needs.  Fully assembled this rack holds up to 8 Kayaks or 10+ SUP’s or any combination of both. The base rack is designed to be mounted directly to any dock or flat surface.  Constructed with 1-1/2” Dia. 304 Mirror Polished Marine Grade Stainless Steel tubing, each vertical uprights has adjustment holes spaced 2” apart for maximum storage capacity.  Rack and components include pre-installed UV resistant polyethylene foam pads, Stainless Steel mounting/attachment fasteners, and stainless steel tie-down end loops for using securing straps or a cable lock to safely secure items in the rack.  Whether you’re new to water sports or a seasoned veteran this rack system is a must have for every water activity enthusiast. *Arms sold separately  Features: Mount To Any Dock or Flat Surface Custom build your rack using various combinations of arms Arms adjust every 2" to maximize storage capacity Base arms include Stainless Steel tie-down Loops and Preinstalled UV Resistant Polyethylene Foam Pads Includes Stainless Steel hardware Technical Specifications: Material - 304 Mirror Polished Marine Grade Stainless Steel Dimensions (Height) - 60-7/16" (153.48 cm) Weight - 39 lbs (17.70 kg) *Sold as an Individual 

140 Kayak/SUP Transducer Mounting Arm f/Post Mounts Kayak/Sup Transducer Mounting Arm made of high strength composite material that will give you years of service - withoutany corrosion problems. Also included is the 415 Slip Discs that offer micro adjustments when needed. The Scotty Transducer mount telescopes from a compact 11.5" to 18" when fully extended and swivel 360°. Includes the ever popular Scotty post mount that fi ts into any Scotty Rod Holder mount. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Fillet & Prep Table Rail Mount Adapter Plate w/Hardware  Fillet Table Rail Mount Adapter Plate works on the 326580-3 and 326585-3 fillet tables and comes complete with hardware to mount the plate to the table. Accepts the 327199-1 Removable Rail Mount Clamp (sold separately).

Dual Side Bulkhead or Square/Flat Rail Mount This all 18-8 stainless steel mount attaches to any vertical flat surface such as bulkheads, hulls, transoms or cabin sides.  Also mounts to square or flat rails.  Fits horizontal rails up to 2-1/4” (57 mm) high by any depth or vertical rails up to 1- 5/8” (41 mm) wide by any depth.  Rod portion of mount quickly disconnects for easy storage. Some fasteners required for installation.  Compatible With: Dual Mounted Grills and Tables *Sold as a Pair

Dual Horizontal Round Rail Mount - Oversized Rails  Incredibly strong and rigid, these rail mounts will not slip on the rail.  They have a unique pivoting design which allows them to attach to curved rails or across the corner of a stern rail.  Made of 18-8 stainless steel and 356 hard anodized aluminum they instantly detach without tools for compact storage leaving no hardware on the rail. Fits rail size - 1-1/8" to 1-1/4" (2.86 x 31.8 cm) Compatible With: Dual Mounted Grills and Tables *Sold as a Pair

Vertical LeveLock Round Rail Mount - Standard Rails  This mount combines the versatility of our popular LeveLock® all-angle quick release, cam-action mount for instantaneous leveling, with our sturdy vertical, out-over-the-water Round Rail Mount.  This mount is made entirely of 18-9 stainless steel and 356 anodized aluminum to outlast even the most severe marine environments.  Quickly disassembles for stowage without tools, leaving no hardware on the rail. Fits rail size - 7/8" to 1" (2.22 to 2.54 cm)  Compatible With: Single Mounted Grills and Tables  *Sold as an Individual   

Vertical LeveLock Round Rail Mount - Oversized Rails  This mount combines the versatility of our popular LeveLock® all-angle quick release, cam-action mount for instantaneous leveling, with our sturdy vertical, out-over-the-water Round Rail Mount.  This mount is made entirely of 18-9 stainless steel and 356 anodized aluminum to outlast even the most severe marine environments.  Quickly disassembles for stowage without tools, leaving no hardware on the rail. Fits rail size - 1-1/8" to 1-1/4" (2.86 to 3.18 cm)  Compatible With: Single Mounted Grills and Tables  *Sold as an Individual 

Square Tube Rail Mount Fillet Table - 20"  Features: Solid one-piece construction for long life and easy maintenance Rail mounting system includes the 326599-1 Rail Mount Adapter, the 327197-1 Removable Square Rail Mount Clamps (pair), and all necessary hardware UV stabilized high-density polypropylene construction Medium, 20" wide by 12-5/8" deep Fits Square Tubing 1" - 1-1/4" diameter UV stabilized, high-density polypropylene Assembles in minutes, with all assembly hardware included Easily accessible knife and pliers holders, large includes hose holder and towel bar Knives and pliers not included