SUP/Kayak Rack Features: 32" wide support arms fits 2 kayaks, canoes, sup, surfboards, etc. Adjustable locking straps, with locking hook at one end Supports many times the weight of an average kayak 2' spacing lower rack Top rack open to accomodate any height Robust powder coated metal square tubing combined with thick metal fabrications and MIG welded for strength Universal mount is easy to assemble and take down Removable bolt detaches assembly for quick storage Powder coated popular grey Hammertone

Dock Edge Torpedo Bumper 18" White These large, durable bumpers add an attractive and functionally rugged cushion to the leg pipes of your docking system. Fabricated from the same Quality material as our Dolphin fenders, each weighs a rugged 2.7 lb. and measures 18" tall with a diameter of 5". Place them on dock leg pipes over the mounting brackets to prevent damaging your watercraft from protruding bolts. Product Specifications: Part No.: 91-110-F Description: Torpedo Bumper, 18", PVC, White Weight: 3.5 lbs. Packaging Dimensions: 18 x 6 x 6 inches WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Dock Edge DocKorner Premium Foam Profile Large 9" Corner The ultimate in protection systems. No need for fenders anymore! This revolutionary design incorporates a soft expanded polypropylene core surrounded by U.V. Stabilized integral skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job. Product Specifications: Part No.: 1151-F Description: DocKorner, Large, (1 Pc/Pk), 9", Putty, Foam

Dock Edge Premium Mooring Whip 2pc 12ft. The practical alternative to marine railways, davits and lifts, these fiberglass Mooring Whips are exceptionally strong, attractive and do not obstruct your waterfront view. Each Whip mounts with a durable cast aluminum base with built-in cleat. These quality Mooring Whips act as a spring to maintain your boat at a safe convenient distance away from your dock to prevent impacts caused by waves or the wakes of other passing watercraft. Complete with double braided nylon whip lines, spring lines, and stainless steel mounting hardware. Some mooring areas may be too rough for any type of tie-up system. Weight is more critical than boat length when selecting the correct size of whip. Dock-Side Premium These Premium Whips start with a solid fiberglass rod and are then manufactured in multi-stages with an exclusive cross-wound fiberglass for extra rigidity unobtainable with solid rod alone. This multi-stage manufacturing gives these whips the necessary strength and flex to retain the boats' position. Exclusive "Plug & Socket" design for quick and easy separation and cast aluminum base with built-in cleat, ring and thumb screw. Each whip includes our unique functional roller tip and a tie-off cleat for easier access to your boat. Stainless steel mounting hardware included. Product Specifications: Part No.: 3400-F Description: Mooring Whip, 12', Lines&Hdw, 5,000 lb. cap. Weight: 8.8 lbs. Packaging Dimensions: 86.25 x 3.5 x 1.75 inches

Fender 'TOON Accessory Kit Dock Edge's Fender 'TOON Accessory Kit

SUPRAX SUP Storage Rack System - Single Board Stand Up Paddle Board Storage System You've invested a lot of money into your beautiful boat. Why would you secure your SUP with ugly bungee cords? And that big board sure does take up valuable deck space. You need a storage system that is as stylish as the rest of your vessel. Features: Secure your board to your boat or your wall 061 Aluminum Alloy, sandblasted anodized Heat press, diecut, EVA protective foam Heavy duty shock cords keep boards in place Fits 7/8" and 1" rails Unique rotating clamp allows for mounting on angled stanchions Single Board System Pack Includes: Two Mounting Racks - Sandblasted anodized 6061 aluminum with diecut EVA protective foam Four Articulating Clamps - Versatile clamp can be mounted to straight or angled rails and stanchions Clamp Inserts - 4 x 1" and 4 x .0875" plastic clamp inserts All mounting hardware and installation tools included WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SUP, Kayak & Dinghy Pack with Suction Cup Installation The Navilight dual kit is the ready-to-go solution whenever it is needed to exhibit an all-around white light and sidelights. The all-around white light as well as the Tricolor light are equipped with a dual function suction mount - holding either the Navilights, a GoPror/Action camera or any other accessory utilizing the mounting bracket. Contains the lights and mountings needed to equip most boats up to 12m with Navigation lights in compliance with 72 COLREGs - if the boats infrastructure allows, that the Masthead light can be positioned at least 1 m (3.3 ft) above the sidelights. On a power-driven vessel of 12 meters or more in length but less than 50 meters in length: As green or red sidelight As sternlight All-round white light On a power-driven vessel of less than 12 meters in length: As green or red sidelight As combined green/red As sternlight Masthead light Sternlight On a sailing vessel underway: As green or red sidelight As sternlight All-round white light On a sailing vessel of less than 20 meters in lengths as backup light: TriColor lantern at or near the top of the mast Vessel under oars All-round white light Anchored vessels and vessels aground Anchor lights must always be shown from sunset to sunrise All-round white light Specifications: USCG Approval, 2 Nautical Miles Includes dual function suction mount - holds Navilight or GoPro®/Action camera or any other accessory utilizing the mounting bracket Floats light facing up Submersible to 20 m Corrosion resistant 2x "3M VHB" self-adhesive "landing pad" to securely attach the light on abrasive surfaces 2x "3M VHB" self-adhesive curved "landing pad" to securely attach the light on inflatable boats 2x neoprene stow away bags Each light powered by three AAA batteries (not included) Size (each light): H = 95 mm, O = 68 mm Weight (each light, net): 141 g

SUP & Board Rack Edson's SUP & Board Rack is designed to safely, securely, and conveniently cradle your board out of the way of sails, sheets, anchors, feet, and anything else on deck. Built with Edson's famous commitment to lifetime products, high-quality 316 stainless is used throughout and complements any boat's aesthetics. The ComfortGrip padding grips and pads the board, keeping your board's deck pad and finish in top condition while securely holding the board in place. Mounts to any railing from 1" to 1-1/4" diameter. The unique mounting system allows installation on rails of varying vertical/horizontal orientations, folds flat out of the way when not in use, and is easily removed and stowed for security.

Dock Edge Dockguard Economy PVC Profile 10ft. Roll - White The economy Dock Guard co-extruded Profile can be used in light to medium duty applications. It features a raised lip for gunwale protection on Ski and Bass boats. Fabricated from Marine Grade PVC with UV Inhibitors and Fungicides. Product Specifications Part No.: 1135-F Descriptions: Dock Guard Profile, (10 ft/bag), White

Dock Edge Dolphin Dockside Bumper 7" x 16" The ultimate in heavy impact protection Rugged, air filled Heavy-wall molded PVC & integral inflation valve Angled ends to deflect craft Use Straight bumpers in pairs to form inside corners Excellent gunnel protection Industrial Strength with the Standard Quality and Performance of Dolphin Fenders Product Specifications: Part No.: 1060-W-F Description: Dock-Side Dock Bumper, 7" x 16", White WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Dock Edge Dolphin Dockside Bumper 12 x 12 Corner White The ultimate in heavy impact protection Rugged, air filled Heavy-wall molded PVC & integral inflation valve Angled ends to deflect craft Use Straight bumpers in pairs to form inside corners Excellent gunnel protection Industrial Strength with the Standard Quality and Performance of Dolphin Fenders Product Specifications: Part No.: 1064-W-F Description: Dock-Side Dock Bumper Corner, 12x12, White WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Dock Edge Inflatable Dock Wheel 12" Diameter 12" Smooth rolling wheels offer substantial dock cushioning and feature molded-in valves to adjust the level of firmness. Heavy-duty Hot Dipped galvanized hardware mounts securely to the dock. Guides boats into your slip easily, regardless of wind and current conditions. Integrally molded ribs both top and bottom of these wheels make them valuable dock and boat protection and a formidable guard against impacts. Product Specifications: Part No.: 95-072-F Description: Dock Wheel, Corner Mount, 12", White

Dock Edge Cleatlite Solar Dock Light w/ SS Mooring Cleat 12" These solar lights are mounted on top of a sturdy steel base, housed inside an attractive, Colonial style 12" tall, 4" wide vinyl pillar. Easy to install and NO WIRES. These decorative and functional dock accessories will add style to your dock day or night. The lamp is designed to illuminate your boat, dock and stainless steel cleat, and not shine in your eyes. Each kit includes, pillar, stainless steel cleat, mounting base, solar light and rechargeable batteries. Product Specifications: Part No.: 96-250-F Description: CleatLite, Solar Dock Light c/w SS Mooring Cleat

C-Shape DockPro™ Vinyl Dock Edging - 25' Coil Double molded vinyl dock edging is molded twice then molecularly bonded for extra durability and protection. A tough inner core is surrounded with our soft white vinyl for extra cushion against tough docks. Each piece installs easily to the edges of dock piers or floats with screws or nails. Available in our four most popular profiles and a full range of lengths

Dock Edge DocKushion Premium Foam Profile Part No. 1150-F DocKushion, Large 48" Foam The ultimate in protection systems. No need for fenders any more! This revolutionary design incorporates a soft expanded polypropylene core surrounded by U.V. Stabilized integral skin foam. This creates the softest but most durable bumper you can treat your boat to. A molded in backer allows strong secure mounting. Unique male and female sockets at the ends make joining the pieces a snap for a seamless look. Connect DocKushion lengths end-to-end for long runs. End caps and corners complete your system for a professional, clean looking job. Product Specifications: Part No.: 1150-F Description: DocKushion, Large, (1 pc/Pk), 48", Putty, Foam