259 Rod Holder Height Extender Increase your odds with easier access to your rod and reel. Extends the height of the rod holder by 6-1/2", allowing for faster access when that fish strikes. Made from super tough re-enforced nylon. Works with Scotty post mount rod holders (except No. 240 Striker)

254M MINI Rod HOlder Height Extender The "Mini Extender" allows you to lift your Scotty Rod Holder off the deck, allowing full movement and versatility. The "Mini Extender" works perfectly to eliminate the possibility of your rod interfering with an inconvenient rail position or other obstruction. For use with all Scotty Post mount rod holders. Extends the height of a rod holder by 4-1/4"

254 Rod Holder Height Extender with Stainless Steel Shaft Features: Increase your odds with easier access to your rod and reel Extends the height of a rod holder by 8 1/2” Comes with stainless steel shaft for ultimate strength Works with all Scotty post-mount rod holders WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Adjustable Rod Holder Extender Provides the option for you to position your Scotty Rod Holder into that perfect fish fighting location. Conveniently position your rod holder closer to you on your kayak or your downrigger to eliminate reaching for your rod. Can be used in conjunction with any previous Scotty Downrigger Boom Mounted Rod Holder to bring the fish fighting action closer to you. Extends the height of a rod holder by 6-1/2" WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

4" Nylon Rod Holder Extension Rod holder extenders used to shorten your rod holder to fit your bent butt fishing rod Fits most medium and large rod holders and are 1.51" wide

2" Nylon Rod Holder Extension Rod holder extenders used to shorten your rod holder to fit your bent butt fishing rod Fits most medium and large rod holders and are 1.51" wide

Flush Mount 30° Nylon Rod Holder - White  Corrosion-free nylon rod holder. These 30° light-duty fishing rod holders are an economical way to add more rod storage. Molded in one piece from UV-resistant Nylon, these rod holders are tough and corrosion-free. 10" tube. Cap is 4" long x 3-1/2" wide. Installs into a 2-1/16" hole. Mount with 3/16" screws (not included).

Flush Mount 30° Nylon Rod Holder - Black  Corrosion-free nylon rod holder. These 30° light-duty fishing rod holders are an economical way to add more rod storage. Molded in one piece from UV-resistant Nylon, these rod holders are tough and corrosion-free. 10" tube. Cap is 4" long x 3-1/2" wide. Installs into a 2-1/16" hole. Mount with 3/16" screws (not included).

416 Rod Balancer/Rod Rest - Black Fight the fish instantly with the Scotty Rod Balancer! Built from engineering grade nylon, the 416 is built tough and made to last. This minimalist, nonresistance approach to fishing encourages an "instant strike" method for more bite to strike hook-ups. Works with all Scotty post mounts and rod holder height extenders, offering 360° rotation. The versatile Rod Balancer also makes for a great rod rest when fighting big fish in a small boat or kayak. So go ahead and fight the fish, not the fishing gear! Features: Nonresistance approach encourages more bite to strike hook-ups when fishing Increased successful and efficient hook-sets Built tough from rugged engineering grade nylon Makes for a great rod rest when fighting big fish in a small boat or kayak Works with all Scotty post mounts and rod holder height extenders 360° rotation available when using Scotty post mounts or extenders Made to last by Scotty in Canada Scotty always recommends using a rod safety leash at all times

Slip Discs The Scotty Slip Discs allow you to make micro adjustments to your rod holder or any of our Scotty Rod Holder Height Extenders. These discs when placed between the rod holder post and Scotty Rod Holder, allow you to obtain infinite adjustment angles. Now you can adjust your rod holder to that perfect fish fighting position! WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

RAM-Rod Holder 8" Post Extension Arm Get your fishing rod closer to you, closer to the action, or simply out of the way with this latest extension from RAM. Rugged, high strength composite construction ensures years of performance on the water. The rod holder extender will lift your RAM-ROD holder up off of your deck and enable ideal positioning in tight spaces such as on kayaks. This extender is perfect for increasing the rod holder height when using a side mounted gunnel or transom mount. Arm Length: 8" Compatible Mounts/Holders: 1. Attaches to all spline posts with male teeth pattern. 2. Attaches to all rod/tube holders with female groove pattern. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

423 Downrigger Rod Holder Adapter Turn your downrigger mount into a rod holder mount with Scotty's 423 Downrigger Rod Holder Adapter. In combination with a 241 or 241L Mount, easily place the adapter on top of your 1023 Tilt-Up Mounting Bracket, and select your favourite rod holder and you're ready to go. Built to last with rugged engineering grade nylon. *241L Combination Side/Deck Mount, 1023 Tilt-Up Mounting Bracket, 1026 Swivel Mount and 400 Orca Rod Holder not included.

Baitcaster Rod HolderTrack Combo w/Gearhead & 4" Track Includes: 280 Baitcaster / Spinning Rod Holder 438 Gear-Head 440-4 Low Profile Track The Baitcaster / Spinning Rod holder is a versatile rod holder for any angler. The baitcaster reel sits in a cushioned cradle while a front slot allows for a spinning reel. The open bottom allows for the rod holder to accommodate trigger grips as well. Rods can be secured with a soft latching strap which snaps over the top for baitcaster or under the bottom for spinning reels. The 438 Gear-Head Track Adapter quickly slides into place and locks down Scotty rod holders and accessories, this allows you to quickly change rod holder positions with a simple twist. The Scotty 440-4 Low Profile Track is made from high strength composite material. The track can be quickly and easily installed on a kayak, canoe or any other watercraft. Dimensions: 1-3/4" wide x 3/8" tall x 7" long (4" usable track) WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

ShadeFin™ Telescopic Rod Holder Mount Wherever you are onboard, ShadeFin can follow! The Telescopic Rod Holder Accessory for ShadeFin – a versatile attachment option that inserts into standard gunnel rod holders for portable, adjustable boat shade. Made from high-quality, lightweight anodized aluminum, the Telescopic Rod Holder Accessory extends from 42" to 67" tall – elevating ShadeFin over the deck for boaters to comfortably stand underneath. For boaters at the dock, sandbar, or in the water, the Telescopic Rod Holder Accessory can also be adjusted to position ShadeFin over the side of the boat – keeping you protected from the sun. Easily Adjustable As the sun changes position, the angle and height of this accessory can easily be adjusted at two points along its body – the bottom joint and the throw latch. Toward the base, the bottom joint features a Sure-Grip Knob and Pull Pin Lock that enables the adjustment of the accessory's upward angle. The throw latch half-way up the body is used to adjust the height and 360° rotation of the ShadeFin. If using this accessory with the Adjustable Rod Holder Mount, the angle of ShadeFin can also be adjusted from the Sure-Grip Knob at the top.  Operation To use the Telescopic Rod Holder Accessory, simply insert the solid gimbal butt into any standard rod holder on the gunnel, remove the Pull-Pin, adjust the upward angle using the Sure-Grip Knob at the bottom joint to the desired 0°, 15°, or 30°, and reinstall the Pull Pin. Then, at the top, simply insert the Fixed or Adjustable Rod Holder Mount into the opening. The mount will secure in place when its gimbal butt seats into the Accessory gimbal pin. Then attach ShadeFin into the Mount, as directed in the Instruction Manual, and deploy. Use the throw latch to adjust the ShadeFin height and horizontal rotation. Features: Features Sure-Grip Knob at the joint with a secure Pull Pin Lock Features a throw latch for secure height adjustment from 42" to 67" Features solid aluminum gimbal butt and internal Delrin bearings High-quality drawn aluminum tube Pairs with T10-3000-5 or T10-3000-6 at the top sold separately 1-year limited warranty

Triple Rod Holders Scotty's multiple rod holder comes with a built-in lur and accessory rack, which give you quick access to your lures and tools No. 362 Triple rod holder permanent mount board only