|
Sure-Grip Clamp-On Rail Base - Fits Up To 7/8" Diameter
This Attwood Sure-Grip Flush Mount can fit a round rail up to 7/8” and is constructed out of extruded aluminum.
Specifications:
Base: Clamp-on rail base
Fits: Round rail up to 7/8 in. diameter
|
6.14 |
|
|
Sure-Grip Flush Mount Mounting Base - Fits 2" Flat Surfaces
This Attwood Sure-Grip Flush Mount can fit 2" flat surfaces and is constructed out of extruded aluminum.
Specifications:
Base: Flush base
Fits: 2” flat surfaces
|
5.00 |
|
|
Clamp-On Rail Mount Fits On 1" & 1-1/4" Rails
Designed to allow secure mounting of the Navilights with magnetic base to the bow pulpit or stern rail.
Examples of Usage:
The Clamp-on Rail mount easily attaches to the bow pulpit and can safely hold for example the Navilight Tricolor. In a nearly center position it may be used in its BiColor mode, otherwise it is recommended to use two Clamp-on Rail mounts, each equipped with a Navilight Tricolor showing the green and red light individually.
Mounted to the Stern rail it may hold the Navilights TriColor, or the Navi light 360°/Navi light Rescue to show the Sternlight.
The Clamp-on Rail mount may also be used on vertical poles - together with the Navi light 360°/ Navi light Rescue it is the perfect solution for the Masthead light.
Specifications:
Save mounting of Navi lights with magnetic base (Navi light 360° 2NM, Navi light Tricolor 2NM, Navilight Red/Green, Navi light 360° Rescue).
Fits on rails from 25 to 32mm (7/8" to 1-1/4")
Rotates through 180°
Size: L = 97mm, W = 50mm, Diameter = 55mm
Weight: 80g
|
33.65 |
|
|
Scanpod Slim Deck Pod - Up to 7" Display
Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.
Features:
Fits up to 7” displays
Usable face 9.4W x 6.25H
Swivel & Tilt Base
One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position
Best viewing angle
An adjustable ball joint allows range of movement and multiple mounting angles
Added Strength
Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration
Overhead mounting
Deck Pod models can be overhead mounted.
Hassle Free Install & Service
Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.
Increased Protection
Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it wont deteriorate over time.
Supplied Uncut
As standard you will receive your Scanpod uncut
|
386.89 |
|
|
Deck Pod - Ultra Compact f/Up to 7" Displays
Compact Deck Pod - Up to 7" displays - Slim Back - White
Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.
For Displays & Standard Instruments:
Fits up to 7” displays (ultra compact , slim back)
Usable face 9.4H x 6.25W
Accommodates 3/4 Standard instruments (e.g. ST60)
Features:
One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position
An adjustable ball joint allows range of movement and multiple mounting angles
Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration
Deck Pod models can be overhead mounted. Refer to part number guide for compatibility
Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front
This design allows for a quick and safe install and repeat servicing
Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time
As standard you will receive your Scanpod uncut
|
402.30 |
|
|
Sure-Grip Flat Rail Base - Fits Square Rail
This Attwood Sure-Grip Flush Mount can fit square rails and is constructed out of extruded aluminum.
Specifications:
Base: Flat rail base
Fits: Square rail
|
5.00 |
|
|
Rail Base Fitting Rectangular Base 90° 316 Stainless Steel - 1-7/8" x 3-3/16" - 1" OD
Replacement rail base fitting.
Features:
Constructed of corrosion resistant investment cast 316 stainless steel.
Stainless tubing with a wall thickness of 0.049”
Installs with four FH fasteners (not included).
∗Sold as an individual
|
17.53 |
|
|
Rail Base Fitting Rectangular Base 90° - 316 Stainless Steel - 1-11/16" x 3" - 7/8" O.D.
Replacement rail base fitting.
Features:
Constructed of corrosion resistant investment cast 316 stainless steel.
Stainless tubing with a wall thickness of 0.049”
Installs with four FH fasteners (not included).
∗Sold as an individual
|
15.66 |
|
|
Stainless Steel Garboard Drain Plug - 7/8" Diameter
The Garboard Drain Plug is a threaded removable plug, which has a retention system that keeps the plug from getting lost.
Features:
High-polished #316 stainless steel reduces corrosion
Large 7/8" (27mm) hole for servicing stern drives
*Gasket not included
|
26.82 |
|
|
Fore & AFT Seat Slide Pedestal Mount - Fits 2-7/8" Post
This seat slide pedestal mount has a 5-1/4" hole pattern and fits virtually all marine seat brands.
Features:
Cast aluminum mounting construction with injection-molded plastic handles
Extruded aluminum seat slide allows for 5" of fore and aft travel
360° rotation with a locking knob
Locks into pedestal posts with pre-tapped adjustment holes
Class AD certified per ABYC standards
Specifications:
Post Size: Fits a 2-7/8" diameter post
|
98.10 |
|
|
Clamp-On Rail Mounted Cup Holder - Large for Up to 2" Rail - White
Camco's Clamp-On Rail Mounted Cup Holder provides a secure location to keep your beverage. It is a great addition to any boat with 1-1/2-inch to 2-inch rails. The secure clamp assembly keeps the cup holder in place with the help of tension adjustment screws. Swivel mount allows you to install on any angle rail keeping your cup holder level and in place. The cup holder is constructed of a durable, UV-resistant polymer and fits most standard sized drinks, cups, cans, bottles and tumblers.
Features:
The Perfect Boating or RV Accessory: Provides a secure location to keep your beverage; Cup holder mounts to 1-1/2-inch to 2-inch boat rails
Compatibility: Fits most standard cups, cans, bottles and tumblers
Swivels to Any Angle: Swivel mount allows you to install on any angle rail keeping your cup holder level and in place
Durable Construction: Constructed of a durable, UV-resistant polymer
Color: White
|
10.62 |
|
|
Rail Base Fitting Rectangular Base 30° 316 Stainless Steel 1-7/8" x 3-3/16" - 1" OD
These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included).
*Stainless tubing with a wall thickness of 0.049”
|
12.17 |
|
|
Rail Base Fitting Rectangular Base 45° 316 Stainless Steel - 3-1/4" x 1-7/8" - 1" OD
These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included).
*Stainless tubing with a wall thickness of 0.049”
|
18.12 |
|
|
Rail Base Fitting Rectangular Base 60° 316 Stainless Steel - 1-7/8" x 3-1/4" - 1" OD
These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included).
*Stainless tubing with a wall thickness of 0.049”
|
18.47 |
|
|
Rail Base Fitting Rectangular Base 30° 316 Stainless Steel - 1-7/8" x 32-3/16" - 1" OD
These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049”.
Features:
Investment Cast 316 Stainless Steel
30° Rectangular Base
1" Tube OD
Base: 1-7/8" x 3-3/16"
Fastener: 1/4" FH
|
17.40 |
|