Heavy-Duty Adjustable Rod Holder with Combo Mount - White  This rod holder is designed for use with baitcasting and spinning reels. Features: An ergonomic design and easy-to-find rapid-release latch Large, easy-grip lock-nut that offers an easy 180-degree vertical adjustment range for a variety of rod tip height settings Specifications: Color: White *Sold as an Individual

Heavy Duty Adjustable Rod Holders Features an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.

Heavy Duty Adjustable Rod Holders Features an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods.

Heavy Duty Pro Series Rod Holders The Pro Series line of molded rod holders takes the Pro Series to the next level with the addition of the Combo Mount. All the Pro-Series unique features you've come to expect, with the ability to mount in multiple configurations. Designed for use with casting and spinning rod holders. Heavy-duty, deep-tooth gear lock securely holds rod holder in mounting base. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree Angle Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle. Specifications: Angle: 5-degrees Stem Length: 4 inches with wing nut Use for: Horizontal rod position Includes: 5071 mounting base

Sure-Grip Stainless Steel Rod Holder - 8" & 5-Degree Angle Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle. Specifications: Angle: 5-degrees Stem Length: 8 inches with wing nut Use for: Horizontal rod position with added clearance Includes: 5071 mounting base

Sure-Grip Stainless Steel Rod Holder - 4" & 25-Degree Angle Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle. Specifications: Angle: 25-degrees Stem Length: 4 inches with wing nut Use for: Drifting or trolling Includes: 5071 mounting base

Sure-Grip Stainless Steel Rod Holder - 4" & 45-Degree Angle Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle. Specifications: Angle: 45-degrees Stem Length: 4 inches with wing nut Use for: Trolling Includes: 5071 mounting base

Adjustable Rod Holder Extender Provides the option for you to position your Scotty Rod Holder into that perfect fish fighting location. Conveniently position your rod holder closer to you on your kayak or your downrigger to eliminate reaching for your rod. Can be used in conjunction with any previous Scotty Downrigger Boom Mounted Rod Holder to bring the fish fighting action closer to you. Extends the height of a rod holder by 6-1/2" WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post, Combination Bulkhead/Flat Surface Base & Plunger The RAP-394-SSBMPU consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline post arm and combination/bulkhead/flat surface mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Features: Quick release and installation High strength materials ensure product longevity Compatible with all RAM & 3rd party post spline bases Compatible with spinning reels and level wind reels Ratchet system allows for multiple articulation points Lanyard tie points for extra security Custom designed for heavy chop environments Mount virtually anywhere on heavy rigged kayaks without hinderance Lifetime warranty Made in U.S.A. Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Post Spline Length: 3" Material: High Strength Composite Notes: The "U" in the part number reflects product packaged in poly bag.

ShadeFin Adjustable Rod Holder Mount Lightweight and versatile, the Adjustable Rod Holder Mount for ShadeFin makes adding shade to your boat easy! Sliding the gimbal-slot butt end over the rod holder’s gimbal pin makes a secure, quick connection. A beveled, nylon sleeve is included, in the instance the rod holder opening is oversized for the mount’s shaft. Verify that the gimbal slot on the mount is mated with the pin in the rod holder, or Adjustable Telescopic Gunnel-Mount, insert the ShadeFin, adjust to your preferred shade angle and enjoy. Features: Manufactured from Type-316L stainless steel Features soft-touch knob for easy and secure angle adjustment Adjusts every 15º with safety detents Gimbal-slot butt end for secure rod holder placement Features white nylon sleeve for additional rod holder stabilization Includes self-aligning notch and pin-locking hole 1-year limited warranty

RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post & Flush Mounting Base The RAP-394-SSF consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline post arm and square flush mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The flush mounting base contains 4 pre-drilled holes and a female socket for spline post arms. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Features: Quick release and installation High strength materials ensure product longevity Compatible with all RAM & 3rd party post spline bases Compatible with spinning reels and level wind reels Ratchet system allows for multiple articulation points Lanyard tie points for extra security Custom designed for heavy chop environments Mount virtually anywhere on heavy rigged kayaks without hinderance Lifetime warranty Made in U.S.A. Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Post Spline Length: 3" Material: High Strength Composite Notes: Part number reflects product packaged in clear clam shell for store shelf display.

289 R-5 Universal Rod Holder without Mount The R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.   The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod. *Mount sold separately Features: Easy adjustable lock bar tension Designed and built to withstand all conditions and backed by the Scotty name In the Box: 290 R-5 Rod Holder *Sold as an Individual

290 R-5 Universal Rod Holder w/Mount The R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.   The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod. Features: Easy adjustable lock bar tension Designed and built to withstand all conditions and backed by the Scotty name In the Box: 290 R-5 rod holder 241 Side deck mount *Sold as an Individual

2-In-1 Non-Adjustable Rod Holders *2-Pack These two rod holders have a fixed vertical angle to optimize rod positioning and a smaller size is perfect for medium and light action gear.  Features: Rod throat opening fits most standard and ultra-light rods up to 1-3/16 inches in diameter  The locking ring fits the spinning reel handle shanks up to 7/16-inch diameter Specifications: Mount: Side Color: Black *Includes two-rod holders