SHURflo 80-120-01, Reverse Osmosis Booster System 220VAC The Shurflo 80-120-01 Pump is used for home RO water systems. It is a enclosed reverse osmosis booster low voltage motor. 220 Volts AC Input 80 PSI bypass valve Up to 50 GPD Continuous Duty 0.25" quick connect fitting

SHURflo 80-120-00 The 115 volt Shurflo 80-120-00 Home RO water system Pump. This RO booster systems is ideal for household use. Equipped with a high quality, continuous duty pump that provides a constant flow of feed water to the membrane, yet maintains quiet operation.   Up to 50 GPD 115VAC Input Safe Low Voltage Motor Continuous Duty 80 PSI Bypass 1/4" Quick Connect Fittings Includes Full Tank Shutoff Switch

Reverse Osmosis Pumps The purpose of the reverse osmosis booster pump is to increase water pressure going into the RO unit. This process requires that a high pressure be exerted on the high-concentration side of the membrane, usually 30 – 250 psi for fresh and brackish water, and 600 – 1200 psi for seawater.

SHURflo 8005-952-480 Diaphragm Pump Reverse Osmosis Booster Pump SHURflo Diaphragm Pump 3 Chamber, 21.8 GPH Open Flow, 24/36VDC Continuous Duty, 80 to 100 PSI Bypass (no switch), EPDM Valves, Santoprene Diaphragm, Nylon Housing, 3/8" NPT Female Ports   SHURflo 8000 Series RO Pumps are the most widely used pumps for RO. They are ideal for high pressure / low flow applications with low amp draw. They can be mounted in any position, are compact, and are designed for long trouble-free life.

Shurflo 2088-554-144 Pump 12V Reverse Osmosis Booster Pump RO Diaphragm Pump with 12 Volt DC Motor and Automatic Switch. Polypropylene Pump Body, EPDM Valves, Santoprene Diaphragm. Inlet Port is 1/2 Inch - 14 Male Parallel Thread, Discharge Port is 1/2 Inch - 14 Male Parallel Thread.   Pump Body: Polypropylene Impeller:EPDM Shaft:Santoprene Port Size: Inlet Port is 1/2 Inch - 14 Male Parallel Thread, Discharge Port is 1/2 Inch - 14 Male Parallel Thread. Motor Specs: 12 Volt DC, Permanent Magnet, P/N 11-148-04, Thermally Protected. Wire: 12.5 Inch x 16AWG wires with Switch. GPM/PSI: 3.5 GPM 45 PSI

Shurflo 8000-991-236, Diaphragm Pump 3 Chamber 0.56 GPM 24VDC Shurflo Diaphragm Pump 3 Chamber, 0.56 GPM Open Flow, 24VDC Intermittant Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), EPDM Valves, Santoprene Diaphragm, Nylon Housing, 3/8" NPT Female Ports.   Typical Application: Reverse Osmosis Booster Pump  

SHURflo 8010-252-136, Diaphragm Pump 3 Chamber 0.95 GPM 24VAC SHURflo Diaphragm Pump 3 Chamber, .95 GPM Open Flow, 24VAC Intermittant Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), EPDM Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports, NSF Listed,   Typical Application: Reverse Osmosis Booster Pump, Water Delivery  

Shurflo 8010-252-256 Pump 24V 45Byp 60Psi Shurflo- Diaphragm Pump 3 Chamber, .95 GPM Open Flow, 24VAC (not DC) Intermittent Duty, 60 PSI Demand Switch (adjustable 40-60 PSI), 45 PSI Bypass, EPDM Valves, Santoprene Diaphragm, Polypropylene Housing, 3/8" NPT Female Ports, NSF Listed, Typical Application: Reverse Osmosis Booster Pump, Water Delivery  

SHURflo 8008-943-839 Diaphragm Pump Spectra 125 PSI Replacement Pump This SHURflo diaphragm pump 8008-943-839 is the replacement pump for the Spectra 125 PSI Reverse Osmosis Booster Pump. Heat Sink 34-007 is recommended when using this pump with your RO system. Spectra Low Pressure RO Replacement Pump.

SHURflo 94-161-11100, Diaphragm Pump 115VAC Input SHURflo Diaphragm Pump, 115VAC Input, 36V Pump, 75 GPD, Reverse Osmosis

SHURflo 94-162-11100, Diaphragm Pump 115VAC Input SHURflo Diaphragm Pump, 115VAC Input, 36V Pump, 75 GPD, Reverse Osmosis

General Pump WM4215CL Reverse Osmosis Pump The WM Series Direct Drive Industrial Pressure Washer Pump or Reverse Osmosis Pump. This General Pump WM4215CL has dual inlet and outlet porting. It features the following specs: right hand, 5/8" hollow shaft, 4.2 GPM, 1500 PSI, 1750 RPM   Product Description Reverse Osmosis Pump - Right Shaft This pump is from the General Pump WM Series. It is a reverse osmosis, hollow shaft pump with roller bearings. See Related Products for compatible pump oil. • 316 stainless steel wet-end • 300 Series stainless steel fasteners • Parallel inlet and outlet valve design for efficiency and easy maintenance • Corrosion resistant valve and packing design • Innovative wear resistant high and low-pressure seals • Dual inlet and outlet porting • Anodized crankcase for corrosion resistance • NEMA 56C flange with 5/8” hollow shaft   Technical Specifications Bore: 18 mmStroke: 12.5 mmC rankcase Capacity: 12 oz.Max Temperature: 140º F Inlet Port: 1/2"Shaft Diameter: 5/8"Max GPM: 4.2Max PSI: 1500 RPM: 1750

General Pump WM4215C Reverse Osmosis Pump The WM Series Direct Drive Industrial Pressure Washer Pump or Reverse Osmosis Pump.   Hollow Shaft – General Pump WM Series Specs:   Reverse Osmosis Pump - Left Shaft Max. Inlet Pressure 50 PSI Max. Fluid Temperature 140 Degrees Fahrenheit Inlet Port Thread 1/2in. NPT/F Discharge Port Thread 3/8in. NPT/F Shaft Diameter 5/8in. Pump Dimensions 9.9in. x 7.5in. x 6.0in. Crankcase Oil Capacity 12 oz (use GP Series 100 Oil)     Hollow Shaft – General Pump WM Series Features: 316 stainless steel fluid end for superior corrosion protection. Solid ceramic plungers with advanced surface finish assure durability and longevity. Compact design offers solutions to space limitations. Parallel inlet and outlet valve design for efficiency and easy maintenance.  

General Pump WM4215CL Reverse Osmosis Pump with Motor This General Pump WM4215CL has dual inlet and outlet porting. Features 316 Stainless Steel wet-end and 300 Series stainless steel fasteners, and has a new generation seal system that allows for a longer life. Produces up to 4.2 GPM, at up to 1500 PSI.   Solid ceramic plungers with advanced surface finish assure durability and longevity. Compact design offers solutions to space limitations. Parallel inlet and outlet valve design for efficiency and easy maintenance. NEMA 56C flange with 5/8” hollow left side shaft Corrosion resistant valve and packing design Innovative wear resistant high and low-pressure seals Dual inlet and outlet porting Anodized crankcase for corrosion resistance   Specifications: Max Volume: 4.2 GPM Max Discharge Pressure: 1500 PSI Max Pump Speed: 1750 RPM Max Inlet Pressure: 50 PSI Motor is a 10W18BCT   We build these at time of order. Please see the Literature for pump and motor specs.

SHURFLO 1-209-01, SCREW