|
Grand Slam 850 Electric VHF Antenna Mount
Designed with safety and innovation in mind, boaters can adjust the position of their VHF antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses.
Features:
Standard 1”-14 thread (male) shaft to accept standard VHF antennas
No under-mount clearance required
Machined / Anodized aluminum body with a light brushed finish
Threaded shaft for consistent lift and descent
Delrin bearings for smooth operation
Features removable set screw for manual adjustment
Kit includes drill template and installation instructions
Includes 10” lead for 12-volt DC power supply for lift and descent
Accepts 3A fuse in the main +12 VDC power feed (not included)
Sold individually
Made in the USA
1-year limited warranty
|
899.99 |
|
|
Wedge Plate for GS-850 & GS-950
In case your T-top has a slight curve, keep the appearance of your Grand Slam 850 Electric VHF Antenna Mount and Grand Slam 950 Electric Anchor & Stern Light clean by mounting them perfectly straight with our plastic wedge plates.
Features:
Corrects angle of GS-850 and GS-950 to perpendicular to the T-top
Fits Grand Slam 850 Electric VHF Antenna Mount and Grand Slam 950 Electric Anchor & Stern Light
No drilling
1-year limited warranty
|
45.60 |
|
|
Grand Slam 950 Electric Anchor & Stern Light
With the simple push of a button, boaters can safely adjust the position of their Anchor & Stern Light from the comfort of the helm. Ideal for powered vessels 39’ and under (12-meters and under), the GS-950 is certified for USCG-required 2 nautical miles. The GS-950 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. The GS-950 lights run on 12 volts and consists of four 3-watt LED Cree chips driven by two Mean Well drivers.
Features:
Machined / Anodized aluminum body with a Light-brushed finish
Certified for USCG-required 2-nm
Includes tube, light and 10” lead for 12-volt DC power supply for light function
Threaded shaft for consistent lift and descent
Delrin bearings for smooth operation
Features removable set pin for manual adjustment
Mounts to all hardtops
Reliable long-life LEDs
6-Watt Stern Light and 12-watt Anchor
Low-draw, 0.6 amps per light
Low-voltage 12-24VDC
Made in the USA
1-year limited warranty
|
1379.99 |
|
|
Grand Slam 800 VHF Antenna Mount
The GS-800 VHF Antenna Mount was created specifically to prevent climbing on the boat gunnel to raise and lower a VHF antenna. Lift and descend the antenna from the safety of the deck from under the top. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater.
Features:
Safe, no-hassle raising and lowering of a VHF antenna
No more climbing on T-tops or gunnels
Machined / Anodized aluminum body
Light brushed finish
Polished Type-316L stainless steel crank handle
Folding crank handle locks flush into base
Threaded shaft for consistent lift and descent
Delrin bearings for smooth operation
Roller bearings in crank assembly
Mounts through up to 2" thick hardtops
Includes 4" x 1/4" round backing plate (hardware not included)
Made in the USA
1-year limited warranty
|
779.99 |
|
|
GPS / VHF Antenna Mount for Self Levelling Radar Mount
Single mount for installing an additional GPS / VHF antenna above the radar.
Features
Attaches to top of radome cradle
Fits all standard GPS / VHF antennas with 1? x 14 tpi thread attachment
Materials
Marine grade 316 stainless steel
GPS / VHF Antenna Mount Kit
1 x GPS / VHF mount
2 x M6 x 8mm bolts
2 x M6 spring washers
|
93.83 |
|
|
T-Top Extrusion Plate Pre-Drilled for Grand Slams - 30" - Pair
Heavy duty extrusion for mounting T-Top legs to top frame, while providing mounting for Grand Slam outrigger mounts, electronics boxes, antennas and to conceal wire routing. Can be pre-drilled for Grand Slam mounts. Widely used in Taco Marine Outrigger Ready Program.
Features:
Heavy-duty, suited for a variety of applications and widely used for outrigger mounts
Offered pre-drilled for easy mounting of Grand Slam 280 and 380 outrigger mounts
Choice of low profile and T-top pipe height
Conceals wiring
Sold in Pairs
Made in USA
|
390.12 |
|
|
T-Top Extrusion Plate Pre-Drilled for Grand Slams - 20" - Pair
Heavy duty extrusion for mounting T-Top legs to top frame, while providing mounting for Grand Slam outrigger mounts, electronics boxes, antennas and to conceal wire routing. Can be pre-drilled for Grand Slam mounts. Widely used in Taco Marine Outrigger Ready Program.
Features:
Heavy-duty, suited for a variety of applications and widely used for outrigger mounts
Offered pre-drilled for easy mounting of Grand Slam 280 and 380 outrigger mounts
Choice of low profile and T-top pipe height
Conceals wiring
Sold in Pairs
Made in USA
|
269.40 |
|
|
Grand Slam GS-950BHC Electric Anchor & Stern Light - Black Anodized Aluminum
Not only can boaters adjust the position of their masthead anchor light with the simple push of a button, but the popular GS-950 is now available with a black hard coat anodized aluminum finish – providing enhanced protection from the elements in style. Ideal for powered vessels 39’ and under (12 meters and under), the GS-950BHC is certified for USCG-required 3 nautical miles. The GS-950BHC is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. The GS-950BHC lights run on 12 volts and consist of four 3-watt LED Cree chips driven by two Mean Well drivers.
Features & Benefits:
4 Electric Masthead Anchor Lights
Black hard coat anodized aluminum
Machined / Anodized aluminum body with a Light-brushed finish
Certified for USCG-required 3-nm
Includes tube, light, and 6” lead of 20-gauge wire from the base
12-volt DC power supply for light function
Threaded shaft for consistent lift and descent
Brass bearings for smooth operation
Features breakaway pin for manual operation
Mounts to all hardtops
Reliable long-life LEDs
6-Watt Stern Light and 12-watt Anchor
Low-draw, 0.6 amps per light
Low-voltage 12-24VDC
Pairs with Backing Plate (BP-0850AEY), which is sold separately
Pairs with 6-degree Wedge Plate (WP-850-950), which is sold separately
Made in the USA
1-year limited warranty
Specifications:
Mount Base Diameter (inch): 4-1/4"
Max height of Mount (inch): 6-1/8"
Individual Weight (pounds): 3.5 lbs.
*Sold in a case of four
|
1441.90 |
|
|
Grand Slam 400 Outrigger Top Mount - Pair
TACO Marinenow offers a higher performance outrigger mount with their 400 series specifically designed for boat lengths surpassing 50’ and quad engines exceeding 1600 horsepower. The center console market continues to grow and so does the size of its vessels and the engines that power them. The new GS-400 provides the upgrade in strength to easily handle the increasing outrigger pole lengths in both Aluminum and Carbon Fiber for up to 30’. Experience the difference with this new high performance series of outrigger mounts.
Features and Benefits
Increased surface area on the hard top plate
Increased thickness of the 6" x 8" oval hard top plate to 3/4" to reduce flex
Larger top tube with longer bearing surface for improved stability
Extended upper casting to prevent tube buckling
Compatible with TACO Marine aluminum and carbon fiber poles (1-1/2" diameter)
Ideal for use on high performance boats with 3, 4 or 5 engines
Double the amount of top assembly hardware compared to Grand Slam 280 series
Stainless lever grip for additional strength
New mushroom outrigger twist and lock pin for one hand operation
Eight bolt pattern attachment for increased arm and pole support
Increased thickness in the backing plate to 1/2"
Uses same bolt and hole pattern for installation as current Grand Slam series
Sold in Pairs
Three year limited warranty
|
3047.49 |
|
|
Grand Slam 280 Outrigger Top Mount
The GS-280 is the 4th generation of the top mount that sets the standard in the industry. Its rugged design will provide years of reliable service even in the most challenging saltwater applications. The redesigned locking head provides secure outrigger height positioning using TACO's spline lock technology which provides a positive lock with minimal parts for increased reliability. TACO's further enhanced the rotator lever to provide a sleek and ergonomic shape, using polished Stainless Steel and UV-resistant non-slip Santoprene.
Features
For use on 20'-36' fishing boats
Fits both hardtop and soft top applications
Designed to fit the industry standard TACO Outrigger-Ready Mounting Plate
Rugged stainless steel and anodized aluminum construction
12 locking fishing positions
Uses TACO's spline lock technology for secure outrigger elevation
Ergonomic shaped rotator lever
Polished 316 Stainless Steel arm assembly and lever
Brushed anodized aluminum body
Top-mounted
4" x 6" mounting base
Compatible with TACO Metals 1-1/2" heavy-duty Telescoping TeleOutriggers
Fits TACO Metals Clamp-On Mounting Plates
Sold in pairs
|
1700.47 |
|
|
Grand Slam 2801 Outrigger Top Mount
The GS-2801 is the 4th generation of the top mount that sets the standard in the industry. Its rugged design will provide years of reliable service even in the most challenging saltwater applications. The redesigned locking head provides secure outrigger height positioning using TACO's spline lock technology which provides a positive lock with minimal parts for increased reliability. TACO's further enhanced the rotator lever to provide a sleek and ergonomic shape, using polished Stainless Steel and UV-resistant non-slip Santoprene. The GS-2801 features an off-set handle.
Features
For use on 20'-36' fishing boats
Fits both hardtop and soft top applications
Designed to fit the industry standard TACO Outrigger-Ready Mounting Plate
Rugged stainless steel and anodized aluminum construction
12 locking fishing positions
Uses TACO's spline lock technology for secure outrigger elevation
Ergonomic shaped rotator lever
Polished 316 Stainless Steel arm assembly and lever
Brushed anodized aluminum body
Top-mounted
4" x 6" mounting base
Compatible with TACO Metals 1-1/2" heavy-duty Telescoping TeleOutriggers
Fits TACO Metals Clamp-On Mounting Plates
Sold in pairs
|
1716.54 |
|
|
Grand Slam 390 Mount with 180° Handle
For anglers craving a more competitive edge on the water, the heavy-duty Grand Slam 390 Outrigger Mount steps up to the challenge. We took all the durable, dependable features of the popular GS-380 and incorporated a more robust gusset and thicker arm to withstand the torque and pressure created when using longer outrigger poles. This base is perfect for the bigger, faster center console boats between 25’ and 40’. Anglers can easily deploy an outrigger’s vertical lift and horizontal rotation from the boat deck in rough seas. Additionally, the GS-390 comes equipped with our secure pin-locking technology and pairs well with TACO’s Deluxe Aluminum and Carbon Fiber Tele-Outriggers. For tops that require additional hand clearance, we also offer the GS-390-180, which has a fore-facing rotation handle.
Features:
Stronger gusset support and thicker arm for enhanced durability
Elevation crank handle provides lift from under the T-top
Allows for horizontal rotation from under the T-top
Offset handle for better hand clearance
Cast stainless-steel Type-316L and machined aluminum construction
A strong locking head allows perfect positioning
Pairs with TACO Deluxe Aluminum or Carbon Fiber Tele-Outriggers
Tested and proven quality
Sleek appearance
3-year limited warranty
|
3629.99 |
|
|
Grand Slam 170 Outrigger Top Mounts - 1-1/8" (Pair)
Simple, strong and perfect for boats 24' and under, our Grand Slam 170 Outrigger Mounts are the ideal addition to make your boat into an offshore fishing machine. Their easy installation and attractive appearance will make your days on the water more productive.
Features:
Compatible with 1-1/8" Tele-Outrigger Poles
Adds up to 30-feet of fishing spread
Stainless-steel and Anodized Aluminum construction
Sure-Grip knob allows lift adjustments every 18°
Locking lever secures out-bound rotation to desired location
Delrin bearings allow for smooth, secure operation
Easy installation with the outrigger-ready mounting plates
Sold in pairs
3-year limited warranty
|
963.04 |
|
|
Grand Slam 170-2 Center Mount
Uses TACO's spline lock technology for secure outrigger elevation
Designed for use with standard 1-1/8" butt OD outriggers
Locks every 18°
Derlin bearings and stainless steel internal locking mechanism offer smooth adjustments, secure positioning and prevent movement
Rugged, sure-grip knob adjusts and locks-in desired height & laydown position for safe trailering and navigation under bridges
Stainless steel arm with locking feature ensures TACO outriggers remain securely in place
|
523.04 |
|
|
Grand Slam 390 Outrigger Mount for 1-1/2" Outrigger
TACO took all the durable, dependable features of the popular GS-380 and incorporated a more robust gusset and thicker arm to withstand the torque and pressure created when using longer outrigger poles. This base is perfect for the bigger, faster center console boats between 25’ and 40’. Anglers can easily deploy an outrigger’s vertical lift and horizontal rotation from the boat deck in rough seas. Additionally, the GS-390 comes equipped with our secure pin-locking technology and pairs well with TACO’s Deluxe Aluminum and Carbon Fiber Tele-Outriggers.
Features:
Stronger gusset support and thicker arm for enhanced durability
Elevation crank handle provides lift from under the T-top
Allows for horizontal rotation from under the T-top
Offset handle for better hand clearance
Cast stainless-steel Type-316L and machined aluminum construction
Strong locking head allows perfect positioning
Pairs with TACO Deluxe Aluminum or Carbon Fiber Tele-Outriggers
Tested and proven quality
Sleek appearance
3-year limited warranty
|
3629.99 |
|