|
No-Drill™ Vehicle Laptop System f/97-15 Ford Expedition
This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12" to 18". Dual swing arms provide articulation and 12" of reach for passenger and driver access to the mounted device. Rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation.
The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Compatible Vehicles:
Ford Expedition (1997-2015)
Ford Expedition King Ranch EL (2013)
Ford Expedition Limited (2013)
Ford Expedition Limited EL (2013)
Ford Expedition Ranch EL (2013)
Ford Expedition XLT (2013)
Ford Expedition XLT EL (2013)
Ford F-150 (1997-2003)
Ford F-150 Heritage (2004)
Ford F-250 Light Duty (1997-2004)
Ford Windstar (2004-2007)
Specs & Features
Placement of Mount: Passenger side floor board, under seat
Drilling Requirements: No - uses existing seat bolts
Seat Configuration: Bucket/Bench
Material: High Strength Composite and Powder Coated Steel
Notes:If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.
One 4" riser is included with this vehicle base. Step feature allows minimized amount of intrusion of passenger leg space. This base will not interfere with factory installed console in most installations.
|
266.34 |
|
|
No-Drill™ Vehicle Laptop Base f/97-15 Ford Expedition
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Compatible Vehicles:
Ford Expedition (1997-2015)
Ford Expedition King Ranch EL (2013)
Ford Expedition Limited (2013)
Ford Expedition Limited EL (2013)
Ford Expedition Ranch EL (2013)
Ford Expedition XLT (2013)
Ford Expedition XLT EL (2013)
Ford F-150 (1997-2003)
Ford F-150 Heritage (2004)
Ford F-250 Light Duty (1997-2004)
Ford Windstar (2004-2007)
Specs & Features
Placement of Mount: Passenger side floor board, under seat
Drilling Requirements: No - uses existing seat bolts
Seat Configuration: Bucket/bench
Pole: Purchased Separately
Material: Powder Coated Steel
Features: One 4" riser is included with this vehicle base. Step feature allows minimized amount of intrusion of passenger leg space. This base will not interfere with factory installed console in most installations.
|
98.90 |
|
|
No Drill Vehicle Laptop Base for Nissan NV1500, NV2500 HD, NV3500 HD & Toyota Tundra
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Features:
Installs in minutes with no drilling required
Low profile keeps mount away from passenger leg space
Adjustable riser included for pole adjustment
Specifications:
Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements: No, attaches to seat studs
Seat Configuration: Bucket
Pole: Purchased Separately
Material: Powder Coated Steel
Features: Quick installtion with no drilling needed, rock solid construction with lifetime warranty
Weight: 11.0 lbs
Compatible Vehicles:
Nissan NV1500 (2011-2015)
Nissan NV2500 HD (2011-2015)
Nissan NV3500 HD (2011-2015)
Toyota Tundra (2007-2015)
|
144.35 |
|
|
No-Drill™ Laptop Base f/ '97-16 Ford F-250, F-350, F-450, F-550, F-650, F-750 & Excursion
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Compatible Vehicles:
F-250 (1997-2016)
F-350 (1997-2016)
F-450 (1997-2016)
F-550 (1997-2016)
F-650 (1997-2018)
F-750 (1997-2018)
Excursion (2000-2005)
Placement of Mount:
Passenger side floor board, in front of seat
DRILLING REQUIREMENTS:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Material:
Powder Coated Steel
|
86.82 |
|
|
No-Drill™ Laptop Base f/'17-20 Ford F-Series + More
The RAM No-Drill™ laptop mounting base for the 2015 Ford F-150 features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Features:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: None. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Pole: Purchased Separately
Material: Powder Coated Steel
Custom, No-Drill™ mounting base offers lowest profile in the industry
Manufactured from high strength steel with a durable powder coat finish
If required, high quality fastening hardware is included
Mounts using existing seat bolts, no drilling required
Compatible Vehicles:
Dodge
Journey (2011-2018)
Ford
F-150 (2015-2020)
F-250-F-550 (2017-2020)
Escape (2013-2019)
Expedition (2018-2019)
Transit Connect (2014-2020)
C-Max (2014-2018)
Focus (2011-2018)
Raptor (2015-2020)
Jeep
Compass (2013-2018)
Patriot (2013-2017)
|
45.01 |
|
|
No-Drill™ Vehicle Base f/ '13-21 Ford Fusion + More
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Compatible Vehicles:
Ford
Edge (2007-2013)
Edge Limited (2013)
Edge SE (2013)
Edge SEL (2013)
Edge Sport (2013)
Fiesta (2015)
Fusion (2013-2021)
Placement of Mount:
Passenger side on the floor, under front seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Material:
Powder Coated Steel
Weight:
6 lbs.
Features:
Quick installation with no drilling needed
|
54.68 |
|
|
RAM Mount No Drill Vehichle System f/Nissan NV1500, NV2500HD, NV3500HD &
Toyota Tundra
This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation.
The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens)
The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Compatible Vehicles:
Nissan NV1500 (2011-2021)
Nissan NV2500 HD (2011-2020)
Nissan NV3500 HD (2011-2020)
Toyota Tundra (2007-2021)
Features:
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Material:
High Strength Composite and Powder Coated Steel
Notes:
If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.
|
311.86 |
|
|
No-Drill™ Universal Laptop Mount
The RAM® Universal No-Drill™ Laptop features a heavy-duty steel mounting base designed to fit a variety of vehicles. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
The included RAM Tough-Tray™ is spring loaded to accommodate 10" to 17" laptops. The tray features four adjustable retaining arms with rubber grips. These arms can be moved both vertically and horizontally, enabling a custom fit for varying thicknesses of laptops and access to ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support phones or other electronics.
Features:
Custom, No-Drill™ mounting base offers lowest profile in the industry
Patented ball and socket mounting system offers shock and vibration dampening
Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry
Combination Telescoping pole adjusts both height and swing with one knob
Modular system makes changing your vehicle, or your device, simple and cost effective
Ability to mount laptops, tablets and other devices using the same mounting system
Universal Laptop Tray accommodates most laptops
Specifications:
Placement of Mount: Passenger side floor board, in front of seat
Drilling Requirements: No - attaches to seat studs
Seat Configuration: Bucket
Material: High Strength Composite and Powder Coated Steel
PRODUCT DIMENSIONS:
Height Range: 18.25" - 24"
TRAY DIMENSIONS
Width Range: 10" - 16"
Side Arm Clamp Height: .5" - 1.75"
Tray Depth: 10"
Tray Thickness: 2.125"
HOLE PATTERN
Seat Bolt Distance: 9"-18.875" center to center
BALL/SOCKET SIZE
C Size (1.5")
|
214.60 |
|
|
No-Drill™ Vehicle Base for '07-13 Chevrolet Silverado + More
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Placement of Mount:
Passenger side floor board, in front of seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Hole Pattern:
Seat Bolt Distance: 15"-15.5625" center to center
Pole:
Purchased Separately
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty
Compatible Vehicles
Chevrolet
Avalanche (2007-2013)
Avalanche LS/LT/LTX (2009)
Silverado (2007-2013)
Silverado 1500 (2007-2013)
Silverado 1500 Hybrid (2008)
Silverado 1500HD (2008)
Silverado 2500HD (2007-2013)
Silverado 3500HD (2007-2013)
Suburban (2007-2014)
Suburban 12-Ton (2012)
Suburban 34-Ton (2012)
Tahoe (Front Bucket Seats Only) (2007-2014)
GMC
Sierra (2007-2013)
Sierra 1500 (2007-2013)
Sierra 1500 Denali (2012)
Sierra 1500 Hybrid (2008 2012)
Sierra 1500HD (2008)
Sierra 2500HD (2007-2014)
Sierra 2500HD Denali (2007-2012)
Sierra 3500HD (2007-2014)
Sierra 3500HD Denali (2007-2014)
Sierra Hybrid (2011)
Yukon (2007-2014)
Hummer
H2 (2003-2011)
|
118.24 |
|
|
No-Drill™ Vehicle Base for '05-18 Toyota 4Runner & Tacoma
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Features:
Material: Powder Coated Steel
Placement of Mount: Passenger side on the floor, under front seat
Drilling Requirements: None - attaches to seat bolts
Seat Configuration: Bucket
Pole: Purchased Separately
Weight: 9.0 lbs.
Note: Quick installation with no drilling needed. Rock solid construction with a lifetime warranty. The RAM-VB-138 will not fit bench seat trucks. This base is not compatible with bench seat vehicles.
|
108.56 |
|
|
No-Drill™ Vehicle Base f/ '10-13 Ford Transit Connect + More
Compatible Vehicles:
Ford
Transit Connect (2010-2013)
Transit Connect Wagon Premiun (2013)
Transit Connect XL Van (2013)
Transit Connect XLT Van (2013)
Transit Connect XLT Wagon (2013)
Dodge
Grand Caravan (2008-2009 2012-2016)
Grand Caravan AVP (2013)
Grand Caravan Crew (2013)
Grand Caravan RT (2013)
Grand Caravan SE (2013)
Grand Caravan SXT (2013)
RAM C/V Tradesman Van (2014-2015)
Chrysler
Town & Country (2008-2009 2012-2016)
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Weight:
4.5 lbs.
Material:
Powder Coated Steel
|
47.48 |
|
|
RAM® No-Drill™ Vehicle Base for 2019 RAM 1500
This heavy duty, steel RAM® No-Drill™ laptop vehicle base is custom-designed for the 2019 Dodge RAM 1500. Using the passenger side seat rail bolts as attachment points, provided hardware is used to secure the mounting base in the vehicle.
Specifications:
Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements: No - attaches to seat studs
Seat Configuration: Bucket
Pole: Purchased Separately
Material: Powder Coated Steel
|
46.96 |
|
|
Vehicle Base Ford F-150 (2004-2010)
Ford F-150 (2004-2010)
Lincoln Mark LT (2005-2010)
This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation.
Placement of Mount:
Passenger side floor board, under seat
Drilling Requirements:
No - uses existing seat bolts
Seat Configuration:
Bucket/bench
Pole:
Purchased Separately
Weight:
9.1 lbs.
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.
The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.
Tough-Tray Dimensions:
Tray Depth: 10.0"
Tray Thickness: 2.125"
Tray Width (Expansion): 10" to 16"
Side Clamp Arm Height: 0.5" (min) to 1.75" (max)
Material:
High Strength Composite
The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray.
The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".
Material:
Powder Coated Marine Grade Aluminum
|
248.86 |
|
|
No-Drill™ Laptop Base for the Ford F-150 & Lincoln Mark LT
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Placement of Mount:
Passenger side floor board, under seat
Drilling Requirements:
No - uses existing seat bolts
Hole Pattern:
Seat Bolt Distance: 11.5" center to center
Pole:
Purchased Separately
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.
Compatible Vehicles:
Ford
F-150 (2004-2014)
F-150 Crew Cab (2010)
F-150 FX2/FX4 (2012-2014)
F-150 Harley Davidson (2012)
F-150 King Ranch (2012-2013)
F-150 Lariat (2012-2013)
F-150 Limited (2012-2013)
F-150 Platinum (2012-2013)
F-150 Raptor (2013)
F-150 Regular Cab (2011)
F-150 STX (2012-2013)
F-150 Super Cab (2011)
F-150 Super Crew (2011)
F-150 SVT (2013)
F-150 SVT Raptor (2012)
F-150 XL (2012-2013)
F-150 XLT (2013)
Lincoln
Mark LT (2005-2011)
Note:
If you are installing this product into a 2009-2010 F-150 with the slide out cup holder, the RAM-VB-109A is the preferred kit. The standard RAM-VB-109 kit will install but limit the use of the cup holder. To use the RAM-VB-109 with the slide out cup holder, pull the cup holder all the way out if you plan to use it prior to installation. Once installed, the cup holder will not be able to slide back under the center console. The RAM-VB-109A has an adjustable riser that can be positioned so that the cup holder is not interfered with. For base model trucks without the slide out cup holder, the standard RAM-VB-109 kit is ideal.
|
81.37 |
|
|
No-Drill™ Laptop Mount for the Ford F-250, F-350, F-450, F-550, F-650, F-750 & Excursion
This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Placement of Mount:
Passenger side floor board, in front of seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket/Bench
Material:
High Strength Composite and Powder Coated Steel
Compatibility
Ford
F-250 (1997-2016)
F-350 (1997-2016)
F-450 (1997-2016)
F-550 (1997-2016)
F-650 (1997-2019, 2021)
F-750 (1997-2019, 2021)
Excursion (2000-2005)
|
254.30 |
|