|
C-Cleat Cam Cleat - Medium - Black w/Black Base
3-12mm(1/8" - 1/2") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
22.25 |
|
|
C-Cleat Cam Cleat - Medium - Grey w/Grey Base
3-12mm(1/8" - 1/2") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
23.36 |
|
|
C-Cleat Cam Cleat - Small - Black w/Black Base
2-8mm(3/32" - 5/16") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
20.64 |
|
|
C-Cleat Cam Cleat - Small - Blue w/Black Base
2-8mm(3/32" - 5/16") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
20.64 |
|
|
C-Cleat Cam Cleat - Small - Grey w/Grey Base
2-8mm(3/32" - 5/16") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
21.16 |
|
|
C-Cleat Cam Cleat - Large - Grey w/Grey Base
6-16mm(1/4" - 5/8") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
42.34 |
|
|
T-Cleat Cam Cleat - Small - Red w/Grey Base
2-8mm(3/32" - 5/16") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. T-cleats have tough glass fiber reinforced cams providing outstanding value for most cleating applications.
Features:
Outstanding value for most cleating applications
High strength
Superior holding power
Lightweight
Corrosion resistant
Self lubricating, self-cleaning bearings
Low line entry effort, easy to release
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
20.72 |
|
|
V-Cleat Open - Medium - 4-8mm(3/16" - 5/16") Rope Diameter
V-Cleats are a simple solution to cleating lines under moderate loads.
Features:
Lightweight and corrosion proof
Greater abrasion resistance than traditional plastic cleats
Low, snag free profile
Base profile suits mounting on flat and curved surfaces
Applications:
Control lines on dinghies and catamarans
Material:
PTFE impregnated, glass and carbon fiber composite cleats
|
9.58 |
|
|
V-Cleat Fairlead - Medium - 4-8mm(3/16" - 5/16") Rope Diameter
V-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.
Features:
Lightweight and corrosion proof
Greater abrasion resistance than traditional plastic cleats
Low, snag free profile
Base profile suits mounting on flat and curved surfaces
Applications:
Control lines on dinghies and catamarans
Material:
PTFE impregnated, glass and carbon fiber composite cleats
|
10.45 |
|
|
March 815 BR-C 230V Pump Assy W/Base
|
387.08 |
|
|
March 815 BR-C 115V Pump Assy W/Base 115V
|
434.85 |
|
|
Tuthill 1LEV-C-A-88520-7 Pump W/3Ph 1/2Hp Motor
|
1657.50 |
|
|
Small Alloy Cam Cleat - Red, Black Base
Features:
Hot-forged and hard anodized cams for maximum wear and corrosion resistance
Low effort line entry and exit due to unique teeth, line entry geometry and smooth finish
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Superior resistance to sand and salt
Multi-coil spring generates near constant torque Easy entry/release and secure cleating of even the smallest diameter lines
Suitable for addition to swivel cleat bases for control lines and sheets
Small cleat has aluminium cams and a composite base for maximum durability and light weight
Medium cleat has an aluminium base and cams for maximum rigidity
Engineered for Performance
Intensive development efforts have produced this high performance range of cam cleats that provides unbeatable holding power while allowing easy cleating and releasing of control lines and sheets.
Alloy Cleats™
Aluminium cam models built for ultimate durability where high wear and high loads are encountered. Cams are hot-forged and hard anodized for maximum strength and corrosion resistance. Ronstan Alloy Cleat™ models are available in sizes small and medium. The medium cleat is built on an aluminium base for maximum rigidity whilst the small cleat has a composite base for an optimum blend of lightness and durability.
Slotted Bearings
Self lubricating, self-cleaning slotted bearings provide lower frictional resistance, quicker response times and superior resistance to sand and salt than ball bearings which can deform under load.
Multi-Coil Spring
The multi-coil spring recessed in the upper part of the cam generates near constant torque. This consistency ensures secure cleating of even the smallest lines with minimal abrasion or rope wear.
Unique Teeth and Entry Profiles
Low effort line entry and exit due to unique teeth and entry geometry.
Advanced Composite Base
Small cleat has a base produced from long fiber reinforced polymer to save weight while providing essential stiffness.
Customization
A comprehensive range of specialist cleat accessories allow customization of the cleat set-up to optimize performance by controlling inward lead, outward lead, cleating and uncleating angle and height.
Total Control
Swivel cleat bases further enhance the function of cleats providing articulation, and with some models setting of cleating angle and direction (up or down cleating) to allow control of lines and sheets from various positions on the boat.
Materials:
Hard anodized aluminium cams
Built on hard anodized aluminium base
Specifications:
Rope: 3/32 - 5/16 in.
Height: 3/4 in.
Width: 1 in.
Length: 1-7/8 in.
Fastener: 5/32 in.
Fastener Hole Centers: 1-1/16 in.
M.W.L : 165 lbs.
B.L : 330 lbs
Weight: 0.9 oz.
|
21.17 |
|
|
Swivel Cleat Base
Swivelling cleat unit, 15mm sheaves. Stainless steel arm, small C-Cleat™ & fairlead. Swivel cleat bases permit easy cleating and releasing from any angle.Line load should be limited to: MWL 125kg (275lb), BL 250kg (550lb). Ideal for sheet leads and control lines on dinghies and catamarans. Ideal for cunningham, vang, foreguy, pole topping lift and other control lines on larger yachts.
Features:
360 degree rotation for easy cleating from any angle.
Stainless steel cleating plate for stiffness and minimal distortion under load (blackened).
15mm BB sheaves, suits 2-5mm rope.
Small C-Cleat™ & fairlead.
Maximum line load 125kgs (275lb)
Specifications:
Alloy cleating arms
Grade 316 stainless steel cleating arm
Grade 316 stainless steel fixtures
|
91.67 |
|
|
V-Cleat Fairlead - Small - 3-6mm(1/8" - 1/4") Rope Diameter
V-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can be used as a becket for a 2:1 purchase system.
Features:
Lightweight and corrosion proof
Greater abrasion resistance than traditional plastic cleats
Low, snag free profile
Base profile suits mounting on flat and curved surfaces
Applications:
Control lines on dinghies and catamarans
Material:
PTFE impregnated, glass and carbon fiber composite cleats
|
6.96 |
|