|
Hooligan™ 2 Tent - 8' x 6'
Features:
2 person, 1 room
8' x 6' footprint
Exclusive WeatherTec System keeps you dry, guaranteed
1 door
Single pole dome structure, easy to transport & simple to set up
55" center height
Control airflow with Variflo adjustable ventilation
The window is accessible from the tent's interior
Dry entry vestibule allows convenient access and adjustable airflow
The entire mesh inner tent provides maximum ventilation
Full fly offers complete protection in the harshest conditions
Easy setup with continuous pole sleeve and a color-coded, shock-corded pole
Easy instructions are sewn into the durable carry bag
Specifications:
Floor: Polyethylene 1000D-140g/sqm floor
11mm fiberglass poles
Center Height: 56"
5-10 minute setup
Single Pole setup
Made in China
|
66.19 |
|
|
Stainless Steel Locker Vent - 2-3/8" x 6-3/4"
Locker Vents are designed to promote air circulation in interior areas and prevent mold, mildew, and unpleasant odors. Easy to install with six #8 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 2.56 in2.
|
8.42 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 1/8" x 6" - 10-Pack - Black
Package of 10 Black 6"(15.2cm) long sections with a 1/8"(3.2mm) diameter that shrinks to 1/32"(0.8 mm)
Wire Range: <18 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
9.58 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 6" - 5-Pack - Black
Package of 5 Black 6"(15.2cm) long sections with a 3/8"(9.5mm) diameter that shrinks to 1/8"(3.2mm)
Wire Range: 12-8 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.17 |
|
|
Adhesive Lined Heat Shrink Tubing (ALT) - 3/8" x 6" - 5-Pack - Red
Package of 5 Red 6"(15.2cm) long sections with a 3/8"(9.5mm) diameter that shrinks to 1/8"(3.2mm)
Wire Range: 12-8 AWG
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and
will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water,
oil, acids, and sunlight as well as providing strain relief
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257°F / 125°C
Operating temperature range of -40°C to 110°C
UL 224
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.17 |
|
|
R1 8" x 6.5" Vamp Spin Tower Speakers - Black - 160W RMS & 320W Peak Power
Roswell’s patented vamp spin technology is supercharged with the R1 audio series, giving users 360 degrees of premium sound-sending freedom. This versatile combination pairs our R1 8" and R1 6.5" together to keep the party cranking from the front to the back, on the sandbar, and beyond.
Features:
Klippel® tested and certified to guarantee acoustic performance
R1 8” & R1 6.5” component-style speakers
Coaxially mounted 1" silk dome tweeter
Patented speaker spin technology allows the 6.5" speaker to spin 180 degrees
Concealed integrated 12 dB/oct crossover network
Integrated RGB LED backlight the cone to create your desired visual atmosphere
Machined billet Roswell 360º 3" Universal Clamp with 1.90", 2.375, and 3" adapters
Deutsch wiring harness included for water-tight connection
Specifications:
Color: Black
Continuous Power (RMS): 160 Watts
Peak Power (RMS): 320 Watts
Sensitivity: 90 dB @ 1W/1M
Frequency Response (+ / - 3 dB): 50Hz - 20kHz
Impedance Ω: 2Ω
Dimensions:
Diameter: Spin Speaker: 6.5 in. I 16.51 cm / Mounted Speaker: 8 in | 20.32
Total Width: 19.30 in. I 49.0 cm
Total Depth: 13.575 in. 34.5 cm
Hanging Distance (from center to lowest point): 12.26 in. I 31.93 cm
*Sold as a Pair
|
3244.64 |
|
|
Standard Hatch Hinge
Size:2-5/8" x 3-1/8"
Fastener: #10(7)
Material: Chrome Plated Brass
|
22.45 |
|
|
Standard Hatch Hinge
Size:2-5/8" x 3-1/8"
Fastener: #10(7)
Material: Polished Brass
|
23.04 |
|
|
Cabinet Hinge
Size:2-1/8" x 1-1/2"
Fastener: #6 FH
Material: 304 Stainless Steel
Offset:3/4"
|
7.57 |
|
|
Cupboard Bolt - 2-1/8" x 1-1/2"
Features:
Chrome Plated Zinc Alloy
Black Polymer Slide and Knob
|
23.90 |
|
|
Groco S-73-X Tie Rod Outside 316 SS .250 X 6.75
|
12.29 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 6' Length
This Attwood Fuel Line Kit is a reliable universal replacement for the original equipment on any brand of engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb.
Features:
3/8" x 6' Low Permeation Hose
Universal for any engines and tanks
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
Reliably delivers fuel to your engine
*Does not include fittings for the tank end and for the engine end
|
39.74 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand Valve
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. A Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine is included as well.
Features:
In-Line Fuel Demand Valve
3/8" x 6' Low Permeation Hose
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
Universal for any engines and tanks
Reliably delivers fuel to your engine
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No end fittings
|
69.05 |
|
|
Elite Montana 8 Tent 16' x 7' with LED
Add some outdoor technology to your next campout and still have a lot of room to spread out with Coleman's Elite Montana 8-person tent. Comfortably fits 3 queen-size airbeds. The hinged door makes it easy to move in and out. Built-in LED lights keep the party going all night. During the day, auto roll windows let you catch some rays. Welded floors and inverted protected seams keep you and your items dry in case of rain. A durable tent gives you great airflow while keeping bugs out. Snag-free setup in just 15 minutes.
Features:
8 person, 1 room tent
16' x 7' footprint
Exclusive WeatherTec System keeps you dry, guaranteed
Easy to follow instructions are sewn into the carry bag
Negative angle windows
Self-rolling windows
Hinged door
Shock-corded poles make setup and storage simple
The tent includes remote controlled light
Replaceable 15 watt spiral fluorescent tube
The light runs up to 22 hours on low on 8D batteries (not included)
Light is 100 lumens
Durable carry bag with separate storage bags for tents, poles, and stakes
Easy set up with continuous pole sleeves and InstaClip attachments
Front Porch and Wings provide great outdoor living space
Specifications:
74" center height
1 hinged door
Door can be used without installed door frame
Simple installation and takedown
Modified dome structure, easy to transport and set up
Taffeta: Polyester 75D flysheet
Mesh: Polyester 68D inner tent
Floor: Polyethylene 1000D-140g/sqm
450mm PU coating for flysheet and inner tent
9.5mm and 11mm fiberglass poles
Limited 1 year warranty
Made in China
|
285.89 |
|
|
Sundome Dome Tent 7' x 7' - 3 Person
Features:
WeatherTec system with patented welded floor and inverted seams to keep the inside of the tent dry
A ground vent and 2 windows increase air circulation for comfort
Compact dome shape stands up to wind, includes a door awning and rainfly for extra weather protection
Easy set-up with snag-free continuous pole sleeves
Plenty of room for a queen size air mattress. Includes storage pockets to keep small items organized
Easily packs up into an expandable carry bag with a rip strip
Dimensions: 7' W x 7' L Dome Tent
|
79.76 |
|