Bike Cadence Sensor 2 Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bike Speed Sensor 2 & Cadence Sensor 2 Bundle Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge® cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+® connectivity and BLUETOOTH® Low Energy technology.  With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Monitor your pedaling cadence and wheel speed as you ride. You can even use it to train indoors because the sensor attaches to your rear wheel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GP1170-06 SystemPod Pre-Cut for Garmin 1020/1020xs/1040xs & 2 Instruments for 9.5" Wide Guard NavPod GP1170 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.750"H x 23.25"W x 6.75"D Usable Face: 9.9"H x 20.5"W x 5.375"D Max Cutout: 9.125"H x 20"W Instrument Cutout: 3.6" All SystemPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP2170-06 SystemPod Pre-Cut for Garmin 1020/1020xs/1040xs & 2 Instruments for 12" Wide Guard NavPod GP2170 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.750"H x 23.25"W x 6.75"D Usable Face: 9.9"H x 20.5"W x 5.375"D Max Cutout: 9.125"H x 20"W Instrument Cutout: 3.6" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP1088 SystemPod Pre-Cut for Garmin 820/820xs/840xs & 2 Instruments for 9.5" Wide Guard GP1080 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.5"H x 19.75"W x 6.5"D Usable Face: 9.5"H x 17"W x 5.5"D Max Cutout: 9.375"H x 17"W Instrument Cutout: 3.6" All SystemPods include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

GP2080-13 SystemPod Pre-Cut for Garmin 820/820xs/840xs & 2 Instruments for 12" Wide Guard GP2080 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications. Sizing: Overall Size: 11.5"H x 19.75"W x 6.5"D Usable Face: 9.5"H x 17"W x 5.5"D Max Cutout: 9.375"H x 17"W Instrument Cutout: 3.6" All SystemPods include Acrylic capped ABS plastic Chromed stainless steel tamper-poof fasteners Double seal for watertight integrity Models are available pre-cut for popular electronics Stainless steel mounting hardware and mounting gaskets *See Literature tab for an image with dimensions

Fuel Flow Sensor - 2-100 LPH Features: Flow Range: 2 LPH to 100 LPH (0.53 GPH to 26.4 GPH) All M1AR fuel flow sensor accessories for the FFM100 are fitted with 1/4" NPT female threads Nominal K Factor: 1000 pulses/L (3785.4 pulses/Gal) Cable Length: 1m (3.28') Strainer Size: 200 Mesh (If not already installed after fuel filter) Port Size: 1/4" NPT Female Maximum Viscosity: 1000 cPs Maximum Operating Pressure: 68.95 Bar (1000 PSI) Weight: 775g (1.71 lb) Construction: Aluminum Housing Material Rotors: PPS (Ryton) Shafts: 316/304 Stainless Steel Magnets: Samarium Cobalt O-Ring: FKM (Viton™) WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Take your Oregon or Colorado to the streets or to the trail for great fitness use. Just snap the Oregon or Colorado into this bike mount and you're ready to ride. The mount comes with four cable ties and fits up to a one-inch diameter bar. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

OnDeck™ Temperature Sensor  Monitor temperature remotely with this sensor for your OnDeck™ Hub. Temperature sensor can monitor from -50° to 105°C (from -58° to 221°F).

Water Speed Sensor (4-Pin) f/echo™ Series Fishfinders Easily collect speed data and send it to your echo™ fishfinder with our water sensor. Simply mount our speed sensor on the transom of your vessel and connect it to your device. The paddle wheel on the speed sensor turns as the vessel moves through the water, and speed data is collected and displayed on your device. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

OnDeck™ Security Sensor  Detect unauthorized entry into your vessel with this magnetic security sensor and your OnDeck™ Hub. Door or window installation recommended.

Marine Heading Sensor NMEA 2000 - 6M Cable Connect a heading sensor to a NMEA 2000 network with this 19.7 ft (6 m) cable. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SteadyCast™ Heading Sensor Know where you're actually casting. SteadyCast heading sensor is a simple, easy-to-install solution that provides fast calibration and premium heading accuracy. It aligns your boat bow to its actual orientation so you know where you are casting according to your chartplotter screen. Features: Ensures bow orientation on your chartplotter matches your heading Heading accuracy of plus or minus 3 degrees Easy NMEA 2000® plug-and-play interface Simple 2-step calibration process 9-axis MEMS technology allows installation in any orientation located away from magnetic interference Accurate Heading Even at Low Speed Its heading output rate at 10 Hz and accuracy of plus or minus 3 degrees ensures your chart orientation and boat heading line match up with reality, even at trolling speeds or when dead in the water. Effective in Rough Waters You can also be confident your heading information will remain accurate, even in rough water. Easy Installation, Fast Calibration SteadyCast heading sensor installs easily with NMEA 2000® plug-and-play interface and a simple 2-step precision calibration process for compatible Garmin chartplotters. Basic calibration for displays other than Garmin is also supported. Its 9-axis MEMS technology allows installation in any orientation located away from magnetic interference, and it's built to withstand bilge environments. In The Box: SteadyCast heading sensor with integrated NMEA 2000® drop cable (6 ft) NMEA 2000® T-connector Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GPSMAP® 1022 Keyed Networking Chartplotter - No Sonar 10-inch Chartplotter Is All-in-1 Solution 10-inch color display with keypad interface and multifunction control knob High-sensitivity internal 10 Hz GPS and GLONASS receiver Fully network capable for Garmin Marine Network and NMEA 2000® plus NMEA 0183 support Supports optional BlueChart® g2 Vision® HD charts for Auto Guidance and other premium navigation features GPSMAP 1022 is designed for cruisers, sailors and sailing racers who need the advanced all-in-1 solution provided by our 10-inch keyed chartplotter. Features a large, bright screen coupled with a quick and easy-to-use keypad interface with user-programmable keys and a multifunction control knob. Complete Network Sharing Garmin Marine Network support allows sharing of sonar, maps, user data, dome or open-array radar, IP cameras and Panoptix™ sonar among multiple units. Includes NMEA 2000 network connectivity and NMEA 0183 support for autopilots, digital switching, weather, FUSION-Link, VHF, AIS and other sensors. The Ultimate Connected Boating App Built in Wi-Fi gives you access to the free all-in-one ActiveCaptain™ app, so you can manage your marine experience from nearly anywhere. It creates a simple yet powerful connection between your compatible mobile device and your Garmin chartplotter, charts, maps and the boating community. Wherever you are, you’ll have unlimited access to your cartography, the ability to purchase new maps and charts and access to the Garmin Quickdraw™ Contours Community. Stay connected with smart notifications on your chartplotter screen. You can also plan a trip or prefish a lake, and ActiveCaptain will automatically sync with your chartplotter. Even get notifications for software updates, and decide when to download them on your device. Heading, Position Refreshed 10 Times per Second Fast, responsive built-in 10 Hz GPS and GLONASS receiver refreshes your position and heading 10 times each second to make your movement on the screen more fluid. It makes dropping up to 5,000 accurate waypoints — and finding your way back to them — quick and easy. Upgrade to Our Best Maps on the Water Two SD™ card slots provide expandable memory for accessory map purchases, such as LakeVü HD, LakeVü HD Ultra, BlueChart® g2 HD or BlueChart® g2 Vision® HD, which adds Garmin patented Auto Guidance¹ and other great features. Built-in SailAssist Features To help you gain a wind-maximizing competitive edge, your chartplotter features a pre-race guidance page that shows your virtual starting line along with data fields showing laylines, time to burn before the start and a race timer that can be synchronized across all your networked Garmin GPS products. In addition, other supported sailing features include an enhanced wind rose, heading and course-over-ground lines, set and drift, true and apparent wind data and more. GPX Waypoints Transfer If you have waypoints, tracks or frequently used routes stored on another manufacturer’s GPS product — or on a Garmin handheld device — it’s easy to transfer those items to your new Garmin chartplotter via industry-standard GPX software formatting. In The Box GPSMAP 1022 chartplotter Power/data cable NMEA 2000 T-connector NMEA 2000 drop cable (2 m) Bail mount kit with knobs Flush mount kit with gasket Protective cover Trim piece snap covers Documentation Connections Garmin Marine Network™ Ports: 2 NMEA 2000® Port: 1 NMEA 0183 Input Ports: 1 NMEA 0183 Output Ports: 1 Video Input Ports:  1 BNC Video Output Ports: None Wireless Connectivity: Yes ¹Auto Guidance is for planning purposes only and does not replace safe navigation operations. Wi-Fi is a registered trademark of the Wi-Fi Alliance. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.