|
Temperature Probe with RJ Connector
Used to measure air, soil, or water temperature. Features an electronic sensor sheathed in black UV-stabilized plastic. Includes 25' (7.6M) cable.
Compatible with Weather Envoy, Envoy8X, and Anemometor/Sensor Transmitter Kit.
|
46.02 |
|
|
Stainless Steel Temperature Probe w/RJ Connector
Measure temperature of air, soil, or water with this multi-purpose temperature probe.
Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect's internal temperature sensor. Great option for measuring water or soil temperature without adding another station.
Probe has a 2-1/2" (64mm)-long stainless steel housing and includes 15' (4.6M) direct-burial cable.
Compatible with Wireless Temperature Station (6372), Weather Envoy (6316), Envoy8X (6318), and Anemometer/Sensor Transmitter Kit (6332).
|
81.82 |
|
|
Stainless Steel Temperature Probe w/Two-Wire Termination
Measure temperature of air, soil, or water with this multi-purpose temperature probe.
Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect's internal temperature sensor. Great option for measuring water or soil temperature without adding another station.
Probe has a 2-1/2" (64mm)-long stainless steel housing and includes 15' (4.6M) direct-burial cable.
Compatible with both original Vantage Pro and Vantage Pro2.
|
92.04 |
|
|
Temperature Probe for SST-110 Transom Mount
Stainless Steel Temp Probe for Sitex SST-110
Also works with Dytek Temp guages.
|
63.00 |
|
|
Temperature Probe for SST-110 Thru-Hull
Bronze thru-hull temperature sensor for retrofit, 30' cable for 5 pin plugs.
|
103.04 |
|
|
B117 Bronze Thru-Hull Low-Profile 600 W Blue Connector
Applications
Planing hull powerboats
Sailboats
Features
Industry standard for low-profile transducers
Depth and temperature
Good target detail in shallow-water at 200kHz and good deep-water bottom tracking at 50kHz
Right angle cable exit offers low headroom and protection when transducer is stepped on
Included rubber washer allows tightening of the hull nut to irregular hull surfaces
Housings are ABYC H-27 compliant
Optional temperature sensor
Bronze housing
Boat Size: 8M (25') and up
|
288.35 |
|
|
Programming Cable w/USB Connectors
PC to Handheld programming Cable with USB connector for radios with 2-pin connectors
|
68.40 |
|
|
25M Digital Radar Cable w/ Raynet Connector f/HD & Super HD Color Radar Scanners
|
369.98 |
|
|
5M Digital Radar Cable w/RayNet Connector f/HD & Super HD Color Radar Scanners
|
149.99 |
|
|
10M Digital Radar Cable w/RayNet Connector on one end.
|
209.99 |
|
|
LAN Cable CAT5E w/RJ45 Connectors - 30M
Applications: SC70-130 Satellite Compass
Length: 30M
Includes Pre-molded Connectors
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
512.72 |
|
|
GST™ 43 Thru-Hull Speed/Temperature Transducer w/GST™ 10 Bundle
The GST 43 is a thru-hull transducer that can read water speed and temperature. The transducer can retrofit an existing Nexus 43mm thru-hull transducer (TH43).
Bundled with the GST 10, the GST 43 can connect directly to the NMEA 2000® network, and the information can be displayed on a compatible Garmin chartplotter or instrument display.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
188.99 |
|
|
Vantage Pro2 Plus Wireless Weather Station with UV & Solar Radiation Sensors and WeatherLink Console
Complete Features:
Accurate, reliable weather monitoring with real-time data updates every 2.5 seconds
Industry-leading transmission range of 1,000 ft. / 300 m from the sensor suite to the console
The sensor suite includes outside temperature and humidity sensors in passive radiation shield, wind speed, and direction; rainfall; and UV and Solar radiation
Sensor suite’s rugged, weather-proof housing gives you years of reliable data
Mount the anemometer up to 40’/12 m from the rest of the sensor suite for flexible siting
Includes WeatherLink Console (6313) with a vibrant, HD color touchscreen
The sensor suite is solar-powered with battery backup; the console is AC-powered with battery backup
WeatherLink Console
The WeatherLink Console revolutionizes the way you access, analyze, and understand your hyperlocal weather data reported by your Vantage Pro2™orVantage Vue® sensor suite, or your custom network of multiple Davis sensors. One intuitive device lets you receive and display data from your local network and connect to Wi-Fi to push your data to the WeatherLink Cloud.
WeatherLink Features:
Use the vibrant HD touchscreen to easily navigate, view, and analyze your weather data on one intuitive device
Customize the dashboard to show up to 21 parameters – from temperature to wind to rain – and see the information that matters to you
Use the full database of historical records stored right on the console to create custom graphs and analyze your data
Choose from hundreds of parameters and a dozen sounds to get notified about the environmental changes you care about most
The WeatherLink Console is a fully functional and powerful data display, storage, and analysis tool on its own – no Wi-Fi required. Or you can connect to Wi-Fi to join the WeatherLink community and upload and share data safely and securely
Standard Radiation Shield
The passive Radiation Shield protects temperature sensors from solar radiation and radiated or reflected heat sources.
Standard Radiation Shield Features:
A temperature probe placed in the direct sun, or where it is exposed to a radiant heat source such as a building or concrete will not provide accurate air temperature readings
This radiation shield is the most effective passive shield available
Multi-plate construction for maximum airflow
May be mounted on a metal pipe or wood surface
Use with Wireless Temperature Station or Leaf & Soil Moisture/Temperature Station and all temperature sensors used to measure air temperature
UV Sensor:
Davis Instruments UV index sensor measures the sunburning portion of the UV spectrum. It measures global solar UV irradiance: the sum of the components of solar UV transmitted directly and those scattered in the atmosphere. It reports the UV index, dose rate, and daily and accumulative doses of UV light. This sensor is an excellent addition to the Vantage Pro2 weather station.
UV Sensor Features:
Measures the sunburning portion of the UV spectrum. Allows you to display UV index, dose rate, and daily and accumulated dose
Diffuser provides excellent cosine response
Measures global solar UV irradiance, which includes both directly transmitted and scattered UV
Transducer responds only to radiation in the region of interest and is stable in the presence of heat and humidity
Cutoff ring with a comb structure for cosine response of ± 4% FS
Two-piece housing minimizes radiation heating, allows convection cooling of the sensor, and prevents the trapping of water or dust
Solar Radiation Sensor:
Measures solar radiation for evapotranspiration (ET) and Temperature/Humidity/Sun/Wind (THSW) Index
Diffuser element and housing are carefully designed for accurate cosine response
Silicon photo diode provides a good match to the solar spectrum
*Mounting hardware included; mounting pole sold separately
|
1288.63 |
|
|
Sonic Anemometer
Measure wind with no moving parts. Use with a Sensor Transmitter or an EnviroMonitor Node, or as a replacement anemometer for wireless and cabled Vantage Pro2.
The Davis Sonic Anemometer has no moving parts – it measures wind speed and direction with electro-acoustic transducers that send sonic pulses back and forth. The time it takes for the pulses to travel from one transducer to the other is affected by the movement of air. Speed and direction can then be calculated, with calibration for air temperature. The Sonic Anemometer has its own solar panel that charges an internal battery. It can be used with an EnviroMonitor Node, or as a replacement anemometer for your Davis weather station. It can also be installed in a Sensor Transmitter to create additional wind stations when reporting to WeatherLink Live.
Solar-powered with battery backup. Includes mounting hardware, battery, aligning tool, and 40 ft (12 m) cable.
Works with Sensor Transmitter (#6332 or 6331) or EnviroMonitor Node (#6810). (When using with an EnviroMonitor Node, use an RJ Connector Node Adapter.)
|
664.78 |
|
|
Vantage Pro2 Wireless Weather Station with WeatherLink Console & Standard Radiation Shield
The Vantage Pro2 weather station provides the technology and real-time data you need to respond to changing conditions and make timely decisions. Engineered to handle rugged environments and deliver data with scientific precision year after year, the economical Vantage Pro2 offers the professional weather observer, or serious weather enthusiast, a robust performance with a wide range of options and sensors.
Complete Features:
Accurate, reliable weather monitoring with real-time data updates every 2.5 seconds
Industry-leading transmission range of 1,000’/300 m from the sensor suite to the console
Sensor suite’s rugged, weather-proof housing gives you years of reliable data
The sensor suite includes outside temperature and humidity sensors in a passive radiation shield; wind speed and direction; and rainfall
Mount the anemometer up to 40’/12 m from the rest of the sensor suite for flexible siting
Includes WeatherLink Console (6313) with a vibrant, HD color touchscreen
Sensor suite is solar-powered with battery backup; the console is AC-powered with battery backup
WeatherLink Console
The WeatherLink Console revolutionizes the way you access, analyze, and understand your hyperlocal weather data reported by your Vantage Pro2™orVantage Vue® sensor suite, or your custom network of multiple Davis sensors. One intuitive device lets you receive and display data from your local network and connect to Wi-Fi to push your data to the WeatherLink Cloud.
WeatherLink Features:
Use the vibrant HD touchscreen to easily navigate, view, and analyze your weather data on one intuitive device
Customize the dashboard to show up to 21 parameters – from temperature to the wind to rain – and see the information that matters to you
Use the full database of historical records stored right on the console to create custom graphs and analyze your data
Choose from hundreds of parameters and a dozen sounds to get notified about the environmental changes you care about most
The WeatherLink Console is a fully functional and powerful data display, storage, and analysis tool on its own – no Wi-Fi required. Or you can connect to Wi-Fi to join the WeatherLink community and upload and share data safely and securely
Standard Radiation Shield
The passive Radiation Shield protects temperature sensors from solar radiation and radiated or reflected heat sources.
Standard Radiation Shield Features:
A temperature probe placed in the direct sun, or where it is exposed to a radiant heat source such as a building or concrete will not provide accurate air temperature readings
This radiation shield is the most effective passive shield available
Multi-plate construction for maximum airflow
May be mounted on a metal pipe or wood surface
Use with Wireless Temperature Station or Leaf & Soil Moisture/Temperature Station and all temperature sensors used to measure air temperature
*Mounting hardware included; mounting pole sold separately
|
814.09 |
|