Stainless Steel Temperature Probe w/Two-Wire Termination Measure temperature of air, soil, or water with this multi-purpose temperature probe. Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect's internal temperature sensor. Great option for measuring water or soil temperature without adding another station. Probe has a 2-1/2" (64mm)-long stainless steel housing and includes 15' (4.6M) direct-burial cable. Compatible with both original Vantage Pro and Vantage Pro2.

Stainless Steel Temperature Probe w/RJ Connector Measure temperature of air, soil, or water with this multi-purpose temperature probe. Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect's internal temperature sensor. Great option for measuring water or soil temperature without adding another station. Probe has a 2-1/2" (64mm)-long stainless steel housing and includes 15' (4.6M) direct-burial cable. Compatible with Wireless Temperature Station (6372), Weather Envoy (6316), Envoy8X (6318), and Anemometer/Sensor Transmitter Kit (6332).

Stainless Steel Table Base w/Locking Pin Stainless Steel Table Support with Locking Pull Pin Tube Size: 1-5/8'' Flange Dia.: 6-1/4"

Stainless Steel Pad Eyes w/Stainless Steel Screws The Tigress line of outrigging accessories features a great selection of accessories to fit the needs of any fisherman. Whether you have 15' skiff poles or 35' double rigged tournament poles, Tigress has a rigging accessory for you. All accessories feature top quality materials and are ready to be installed.

Flotec Stainless Steel Waterfall Utility 1/2 HP Stainless Steel construction with a ceramic seal design marks the FPOS4100X as the top of the line in the Flotec Waterfall/utility series of pumps.   KEY FEATURES Complete stainless steel construction - superior corrosion resistance Seal design - allows for continuous operation High performance - ideal for waterfalls and streams WARRANTY 2 year limited warranty BODY CONSTRUCTION:  Stainless Steel HORSEPOWER:  1/2 MAXIMUM LIFT:  30' MAXIMUM CAPACITY:  4100 GPH FLOW at 10' LIFT:  3000 GPM SWITCH TYPE:  No Switch (Manual Operation) DISCHARGE PIPE SIZE:  1-1/4" (ships with Adapter Fittings) AMP DRAW (full load):  7.2 Amps CORD LENGTH:  15' VOLTAGE:  115v AC, 60 Hz MAXIMUM WATER TEMPERATURE:  100°F (38°C)

Stainless Steel Cushion Clamp - 1/2" - 10-Pack Nominal Diameter:1/2" (13mm) Thickness: 0.06 Width: 1/2" (13mm) Screw Size: #10 Prevents corrosion Resistant to oils, acids, saltwater Temperatures range from -50° to 300°F Absorbs shock and vibration Reduces unwanted noise 1/4" clearance mounting hole WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Deluxe Stainless Steel Transom Tie-Down - 2" x 3' - Pair This stainless steel deluxe 2" x 3' trailer tie-down is our finest over-center locking buckle with wrap around buckle protection that is proven to stay clamped under the worst road conditions. It features American made stainless steel S Hooks for saltwater applications. 1,200 lbs. - sold in pairs.

Deluxe Stainless Steel Transom Tie-Down - 2" x 4' - Pair This stainless steel deluxe 2" x 4' trailer tie-down is our finest over-center locking buckle with wrap around buckle protection that is proven to stay clamped under the worst road conditions. It features American made stainless steel S Hooks for saltwater applications. 1,200 lbs. - sold in pairs.

Deluxe Stainless Steel Transom Tie-Down - 2" x 6' - Pair This stainless steel deluxe 2" x 6' trailer tie-down is our finest over-center locking buckle with wrap around buckle protection that is proven to stay clamped under the worst road conditions. It features American made stainless steel S Hooks for saltwater applications. 1,200 lbs. - sold in pairs.

Folding Cleat - Stainless Steel Studded - 4-1/2" Overall Length: 4-9/16" Cleat Length: 4-1/2" Depth: 1-5/8" Overall Width: 1-3/8"

Stainless Steel Welded Pad Eye - 2"L x 5/8"W Specifications: Eye Width 1/2" (13 mm) Eye Height 1/2" (13 mm) Eye Stock 3/16" (5 mm) Length 2" (51 mm) Width 5/8" (16 mm) Fasteners (2), #10 RH (5 mm) C/C 1-7/16" (37 mm) SWL 650 lbs. (295 kg) Weight .5 oz. (14 g)

Stainless Steel Welded Pad Eye - 2-1/4"L x 5/8"W Specifications: Eye Width 1/2" (13 mm) Eye Height 1/2" (13 mm) Eye Stock 1/4" (6 mm) Length 2-1/4" (57 mm) Width 5/8" (16 mm) Fasteners (2), #10 RH (5 mm) C/C 1-11/16" (42 mm) SWL 750 lbs. (350 kg) Weight 1.75 oz. (50 g)

Stainless Steel Round Locker Ventilator 2-1/2" Features: Polished Stainless Steel Round 2-1/2"

Temperature Probe with RJ Connector Used to measure air, soil, or water temperature. Features an electronic sensor sheathed in black UV-stabilized plastic. Includes 25' (7.6M) cable. Compatible with Weather Envoy, Envoy8X, and Anemometor/Sensor Transmitter Kit.

Airmar T80 Water Temperature Probe (8-pin) Find out the water surface temperature by attaching our 8-pin stainless steel temperature probe to your transducer. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.