Wireless Repeater with Solar Power For longer distances or to improve reception in troublesome areas, add one or more Wireless Repeaters. Transmitting and receiving range for each repeater is up to 1000' (300M) outdoors, line of sight; typical range through walls under most conditions is 200' to 400' (60 to 120M). Includes solar panel, regulator circuit, and rechargeable battery. Use up to eight repeaters with a single wireless station, or form a network of weather stations by linking eight repeaters to eight different wireless stations. Compatible with Vantage Pro2 and Vantage Vue only; not compatible with original Vantage Pro.

Wireless Long-Range Repeater with Solar Power For those who wish to send weather data much farther than 1,000' (300M), the Wireless Long-Range Repeater can extend the range up to two miles (3.2 km). Please note: Use of this product requires a pair of external antennas, sold separately.The Long-Range Repeater has a transmitting and a receiving cable, each with an end which will connect to an external antenna. Choose either our large omni directional antenna (#7656), range 1,560' (476 m) in all directions, or our Yagi directional antenna (#7660), range 5,000' (1.5 km) in one direction. You'll need two antennas for each Long-Range Repeater. The charging system is capable of performing continuously even under low light conditions. Includes solar panel, regulator circuit, and rechargeable battery. Compatible with Vantage Pro2 and Vantage Vue only. Not compatible with original Vantage Pro.

1st Watch Wireless Radar w/o Power Cable Untether & Explore - Furuno 1st Watch Wireless Radar, that you can access directly from your iOS devices. Move Around & Explore With Furuno's 1st Watch Wireless Radar, you can do things previously impossible. You can bring the Radar display whenever you go, even put it on the iPhone in your pocket. Since the display is untethered, you are free to roam the vessel while maintaining full situational awareness of your surroundings. For example, you can bring the Radar display with you when jumping into the cabin quickly to grab fishing gear or other tools needed during your voyage. Easy To Use At 1st Glance Plug in the Radar, set up the free app from App Store and you're good to go. With familiar gestures it's a breeze to use; you can even use two iOS devices simultaneously. The app has been created with simplicity and efficiency in mind, providing reliable information that is easily accessible. Features: 4kW Radar antenna, powerful yet compact in size (same housing as DRS2D) Wireless LAN, first Radar in the world accessible from your iOS devies No extra wiring needed except the power source, making installation a breeze Exceptionally simple setup and intuitive operation with user-friendly and free iOS app Extremely economical power consumption Vivid, multi-color Radar target presentation (1/8nm - 24nm) Simple touch interface with familiar gestures User selectable range scale from 0.125 to 24 nm Simultaneously connect and utilize 2 iOS devices, via high-sensitivity wireless signal Power Cable sold as an accessory. 001-266-010-00 Power Requirements: 12-24 VDC Only 24W *Please note: iOS devices and accessories are sold separately and do not come included with this product. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Wireless Vantage Pro2™ Plus ISS with 24-Hr Fan-Aspirated Radiation Shield Wireless Integrated Sensor Suite (ISS) is for use with Vantage Connect, Vantage Pro2 and Vantage Vue consoles, Weather Envoy and WeatherLink. Our innovative integrated sensor suite combines our rain collector, temperature and humidity sensors, anemometer, solar radiation sensor, UV sensor, sensor mounting shelf, and solar panel into one package - making setup easier than ever and improving performance and reliability. For improved accuracy, temperature and humidty sensors are housed inside our solar-powered, 24-hour fan-aspirated radiation shield. The shield protects against solar radiation and other sources of radiated and reflected heat. Compatible with Vantage Pro2, Vantage Vue and Vantage Connect

Wireless Vantage Pro2™ ISS with 24-Hr Fan Aspirated Radiation Shield Wireless Integrated Sensor Suite (ISS) for use with Vantage Connect, Vantage Pro2 and Vantage Vue consoles, Weather Envoy and WeatherLink. Our innovative integrated sensor suite combines our rain collector, temperature and humidity sensors, and anemometer into one package - making setup easier than ever and improving performance and reliability. For improved accuracy, temperature and humidty sensors are housed inside our solar-powered, 24-hour fan-aspirated radiation shield. The shield protects against solar radiation and other sources of radiated and reflected heat. Compatible with Vantage Pro2, Vantage Vue and Vantage Connect.

Complete Wireless Soil Moisture/Temperature Station Product Description Solar-powered station includes transmitter and battery inside weather-resistant shelter, 4 soil moisture sensors and 4 temperature probes. To view the data, add a wireless Vantage Pro2 console/receiver, Weather Envoy, or WeatherLink. Add up to 2 leaf wetness sensors (sold separately), to create a custom station. See also the Wireless Leaf Moisture/Temperature Station (#6345) which does not include sensors. Not compatible with original Vantage Pro stations. This station meets the GLOBE protocol requirements.

Laing D5 710B Solar Pump Energy Efficiency The Solar model has a feature called Maximum Power Point tracking (MPP). This feature controls the pump performance based on the power input of a solar photovoltaic panel. The Solar model can run off as little as 1 watt and will increase in speed and performance as the solar PV panel output increases. The first DC spherical motor pump for direct connection to photovoltaic panels with automatic performance optimization using Maximum PowerPoint (MPP) tracking. GPM given is max. 12-24V DC, 1-35W, 0.30-1.50 Amps with soft start. Bronze Solar Series 6.5GPM at 0' Head (12V) 12-24VDC 1-35 Watts Adjustable Soft Start 1/2"FNPT Ports 230Degree 150psi

Standard Wireless Remote for ACR Searchlights  Enjoy the convenience of controlling your RCL-85 or RCL-95 searchlight with either the Wireless Handheld Remote.  The remote is waterproof, fits comfortably in your hand, and enables simple intuitive control of your searchlight.  It operates on the 433.92 MHz frequency and offers an impressive remote operation distance of 213' (65 m). In addition to directional control of the searchlight, the remote also allows users to turn the searchlight strobe function on and off.  Syncing the remote to your searchlight is a simple process and up to a total of 4 remotes (handheld wireless remotes and/or dash mount wireless remotes) can be synced to one searchlight. Compatible With: ACR RCL-85 adn RCL-95 model searchlights Features: Compact and water-resistant  Operation distance of 213' (65 m) Allows for directional control and on/off functionality  Sync up to 4 remotes with a single searchlight *Sold as an Individual  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Vantage Pro2 Plus Wireless Weather Station with UV & Solar Radiation Sensors and WeatherLink Console Complete Features: Accurate, reliable weather monitoring with real-time data updates every 2.5 seconds Industry-leading transmission range of 1,000 ft. / 300 m from the sensor suite to the console The sensor suite includes outside temperature and humidity sensors in passive radiation shield, wind speed, and direction; rainfall; and UV and Solar radiation Sensor suite’s rugged, weather-proof housing gives you years of reliable data Mount the anemometer up to 40’/12 m from the rest of the sensor suite for flexible siting Includes WeatherLink Console (6313) with a vibrant, HD color touchscreen The sensor suite is solar-powered with battery backup; the console is AC-powered with battery backup WeatherLink Console The WeatherLink Console revolutionizes the way you access, analyze, and understand your hyperlocal weather data reported by your Vantage Pro2™orVantage Vue® sensor suite, or your custom network of multiple Davis sensors. One intuitive device lets you receive and display data from your local network and connect to Wi-Fi to push your data to the WeatherLink Cloud. WeatherLink Features: Use the vibrant HD touchscreen to easily navigate, view, and analyze your weather data on one intuitive device Customize the dashboard to show up to 21 parameters – from temperature to wind to rain – and see the information that matters to you Use the full database of historical records stored right on the console to create custom graphs and analyze your data Choose from hundreds of parameters and a dozen sounds to get notified about the environmental changes you care about most  The WeatherLink Console is a fully functional and powerful data display, storage, and analysis tool on its own – no Wi-Fi required. Or you can connect to Wi-Fi to join the WeatherLink community and upload and share data safely and securely  Standard Radiation Shield The passive Radiation Shield protects temperature sensors from solar radiation and radiated or reflected heat sources. Standard Radiation Shield Features: A temperature probe placed in the direct sun, or where it is exposed to a radiant heat source such as a building or concrete will not provide accurate air temperature readings  This radiation shield is the most effective passive shield available  Multi-plate construction for maximum airflow  May be mounted on a metal pipe or wood surface Use with Wireless Temperature Station or Leaf & Soil Moisture/Temperature Station and all temperature sensors used to measure air temperature UV Sensor: Davis Instruments UV index sensor measures the sunburning portion of the UV spectrum. It measures global solar UV irradiance: the sum of the components of solar UV transmitted directly and those scattered in the atmosphere. It reports the UV index, dose rate, and daily and accumulative doses of UV light. This sensor is an excellent addition to the Vantage Pro2 weather station.  UV Sensor Features: Measures the sunburning portion of the UV spectrum. Allows you to display UV index, dose rate, and daily and accumulated dose Diffuser provides excellent cosine response Measures global solar UV irradiance, which includes both directly transmitted and scattered UV Transducer responds only to radiation in the region of interest and is stable in the presence of heat and humidity Cutoff ring with a comb structure for cosine response of ± 4% FS Two-piece housing minimizes radiation heating, allows convection cooling of the sensor, and prevents the trapping of water or dust Solar Radiation Sensor: Measures solar radiation for evapotranspiration (ET) and Temperature/Humidity/Sun/Wind (THSW) Index Diffuser element and housing are carefully designed for accurate cosine response Silicon photo diode provides a good match to the solar spectrum *Mounting hardware included; mounting pole sold separately

Vantage Pro2 Wireless Weather Station with WeatherLink Console, 24hr Fan Aspirated Radiation Shield, UV & Solar Sensors The Vantage Pro2 weather station provides the technology and real-time data you need to respond to changing conditions and make timely decisions. Engineered to handle rugged environments and deliver data with scientific precision year after year, the economical Vantage Pro2 offers the professional weather observer, or serious weather enthusiast, a robust performance with a wide range of options and sensors. Complete Features: Accurate, reliable weather monitoring with real-time data updates every 2.5 seconds Outside temperature and humidity sensors in a 24-hour Fan-Aspirated Radiation Shield for maximum accuracy  Sensor suite also reports wind speed and direction, rainfall, UV and Solar radiation Industry-leading transmission range of 1,000’/300 m from the sensor suite to the console Mount the anemometer up to 40’/12 m from the rest of the sensor suite for flexible siting Sensor suite’s rugged, weather-proof housing gives you years of reliable data Includes WeatherLink Console (6313) with a vibrant, HD color touchscreen Sensor suite is solar-powered with battery backup; the console is AC-powered with battery backup WeatherLink Console The WeatherLink Console revolutionizes the way you access, analyze, and understand your hyperlocal weather data reported by your Vantage Pro2™orVantage Vue® sensor suite, or your custom network of multiple Davis sensors. One intuitive device lets you receive and display data from your local network and connect to Wi-Fi to push your data to the WeatherLink Cloud. WeatherLink Features: Use the vibrant HD touchscreen to easily navigate, view, and analyze your weather data on one intuitive device Customize the dashboard to show up to 21 parameters – from temperature to the wind to rain – and see the information that matters to you Use the full database of historical records stored right on the console to create custom graphs and analyze your data Choose from hundreds of parameters and a dozen sounds to get notified about the environmental changes you care about most  The WeatherLink Console is a fully functional and powerful data display, storage, and analysis tool on its own – no Wi-Fi required. Or you can connect to Wi-Fi to join the WeatherLink community and upload and share data safely and securely  24hr Fan Aspirated Radiation Shield: The 24-Hour Fan Aspirated Radiation Shield includes a solar- and battery-powered, motor-driven fan that draws a constant airflow through the sensor chamber. At night, when the effects of radiation are less, the fan runs on the battery. This provides more accurate temperature readings than passive shielding alone. 24hr Fan Aspirated Radiation Shield Features: A motor-driven fan draws a constant airflow through the sensor chamber at 500 feet per minute (2,5 m/s)  At night, when the effects of radiation are less, this solar-powered model runs on battery power and the airflow slows to 280 feet per minute (1,4 m/s)  Install your own sensor in the sensor chamber  Sensor chamber: (inch) 2.24” x 3” / (mm) 56.8 mm x 76.2 mm  Includes 10 plates, rechargeable batteries, mounting hardware, and 25 ft. (7,6 m) cable UV Sensor: Davis Instruments UV index sensor measures the sunburning portion of the UV spectrum. It measures global solar UV irradiance: the sum of the components of solar UV transmitted directly and those scattered in the atmosphere. It reports the UV index, dose rate, and daily and accumulative doses of UV light. This sensor is an excellent addition to the Vantage Pro2 weather station.  UV Sensor Features: Measures the sunburning portion of the UV spectrum. Allows you to display UV index, dose rate, and daily and accumulated dose Diffuser provides excellent cosine response Measures global solar UV irradiance, which includes both directly transmitted and scattered UV Transducer responds only to radiation in the region of interest and is stable in the presence of heat and humidity Cutoff ring with a comb structure for cosine response of ± 4% FS Two-piece housing minimizes radiation heating, allows convection cooling of the sensor, and prevents the trapping of water or dust Solar-Powered Wireless Sensor Build a custom system with the sensors you need where you need them. Can support up to one each of five sensors: anemometer, rain collector, temperature probe or temperature/humidity, UV, and solar radiation sensors With an anemometer installed, you can replace your Vantage Pro2 or Vantage Vue anemometer with a remote wind station Industry-leading transmission range of 1,000’/300 m from the transmitter to a Vantage Connect, WeatherLink Live, or console Combine with WeatherLink Live to take full advantage of the Sensor Transmitter’s capabilities Weather-resistant shelter protects electronics Solar-powered with capacitor and lithium backup battery Battery easily lasts eight months without sunlight; more than two years depending on solar charging Easy installation with included mounting hardware One-year manufacturer’s warranty *Mounting hardware included; mounting pole sold separately

Vantage Pro2 Wireless Weather Station with WeatherLink Console & Standard Radiation Shield The Vantage Pro2 weather station provides the technology and real-time data you need to respond to changing conditions and make timely decisions. Engineered to handle rugged environments and deliver data with scientific precision year after year, the economical Vantage Pro2 offers the professional weather observer, or serious weather enthusiast, a robust performance with a wide range of options and sensors. Complete Features: Accurate, reliable weather monitoring with real-time data updates every 2.5 seconds Industry-leading transmission range of 1,000’/300 m from the sensor suite to the console Sensor suite’s rugged, weather-proof housing gives you years of reliable data The sensor suite includes outside temperature and humidity sensors in a passive radiation shield; wind speed and direction; and rainfall Mount the anemometer up to 40’/12 m from the rest of the sensor suite for flexible siting Includes WeatherLink Console (6313) with a vibrant, HD color touchscreen Sensor suite is solar-powered with battery backup; the console is AC-powered with battery backup WeatherLink Console The WeatherLink Console revolutionizes the way you access, analyze, and understand your hyperlocal weather data reported by your Vantage Pro2™orVantage Vue® sensor suite, or your custom network of multiple Davis sensors. One intuitive device lets you receive and display data from your local network and connect to Wi-Fi to push your data to the WeatherLink Cloud. WeatherLink Features: Use the vibrant HD touchscreen to easily navigate, view, and analyze your weather data on one intuitive device Customize the dashboard to show up to 21 parameters – from temperature to the wind to rain – and see the information that matters to you Use the full database of historical records stored right on the console to create custom graphs and analyze your data Choose from hundreds of parameters and a dozen sounds to get notified about the environmental changes you care about most  The WeatherLink Console is a fully functional and powerful data display, storage, and analysis tool on its own – no Wi-Fi required. Or you can connect to Wi-Fi to join the WeatherLink community and upload and share data safely and securely  Standard Radiation Shield The passive Radiation Shield protects temperature sensors from solar radiation and radiated or reflected heat sources. Standard Radiation Shield Features: A temperature probe placed in the direct sun, or where it is exposed to a radiant heat source such as a building or concrete will not provide accurate air temperature readings  This radiation shield is the most effective passive shield available  Multi-plate construction for maximum airflow  May be mounted on a metal pipe or wood surface Use with Wireless Temperature Station or Leaf & Soil Moisture/Temperature Station and all temperature sensors used to measure air temperature *Mounting hardware included; mounting pole sold separately

i70s Wireless Wind Pack  Maximum Visibility and Maximum Versatility The i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1” display the i70s is easy-to-customize with digital, analog, and graphical displays of depth, speed, wind, and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours. Features: 4.1” super bright oversized LCD for maximum visibility All-weather optically bonded display technology delivers brighter colors, sharper contrast, and a wide viewing angle Glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays Simple user interface with sculpted rubber keypad for precise operation in all conditions Customizable data displays of depth, speed, wind, and more SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks NMEA2000 connectivity* for engine, environment fuel, and navigation data Convenient AIS repeater mode allows you to visually track nearby AIS targets Combine the i70s with the ITC-5 instrument transducer convertor and connect to analog depth, speed, and wind sensors Network the i70s with Airmar DST800 transducers and the new in-hull P70s smart transducer Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective sun cover *NMEA2000 certification pending. A DeviceNet to SeaTalkng adaptor is required for connecting the i70s to the NMEA2000 backbone. Intuitive LightHouse User Interface The i70s places frequently used navigation functions right at your fingertips. The LightHouse instrument interface is consistent with Raymarine LightHouse multifunction displays, so Raymarine MFD users will feel right at home with the i70s. Networking Raymarine i70s allows for connectivity to the following onboard networks: First-generation SeaTalk networks using a SeaTalk to SeaTalkng adapter cable Current generation SeaTalkng networks NMEA2000 networks using a SeaTalkng to DeviceNet adaptor In addition to flexible networking capability, the i70s features user-selectable data sources, for integration with multi-sensor networks. The Wireless Advantage The Micro-Talk Gateway enables performance-minded sailors to take advantage of the enhanced accuracy and installation convenience offered by Raymarine’s wireless, solar-powered wind transmitter options. Now it’s possible to use these ultra-lightweight and highly accurate sensors with Raymarine i60, i70, and i70s Instrument systems. When used in conjunction with the optional Raymarine Wireless Mast Rotation Sensor, the system can also provide ultra-precise wind information onboard sailing craft with rotating masts including winged sailboats. The mast rotation angle is also transmitted to Raymarine LightHouse II (v17) Multifunction Displays. Mirco-Talk™ Wireless Gateway Raymarine’s new Micro-Talk Wireless Performance Sailing Gateway seamlessly joins together wired and wireless systems enabling you to achieve all-new levels of high-performance sailing! Benefits include: Performance sailing with wireless wind enhancement on your Raymarine MFD; with accurate lay lines Use the power of your Raymarine MFD to inspire enhanced competitive sailing True wind achieved with sophisticated airflow and yaw algorithms Provides real-time data with a robust and fast refresh rate Mast rotation position sensing, for wing sailboats Quick installation, light and wireless connection to the wind vane Low power when used with Raymarine solar-powered wireless devices T120 Wireless Wind Transmitter The solar-powered Raymarine® T120 Wireless Wind Transmitter sends data wirelessly to Raymarine wireless displays. Features: Functions include: Wind Speed Wind Angle Solar-powered wireless masthead transducer sends key wind data to Raymarine wireless cruising instruments via wireless link Simple to install, even with the mast in place – with no wires running down your mast or through your hull Calibration for wind speed and direction at your wind display Includes: E70361 T120 E70617 T113 E70327  A06049  A06036 A06064 A06031 A06028

Vantage Vue Wireless Weather Station with WeatherLink Console   The fully-integrated, corrosion-proof sensor suite is built to take all the weather your location can give, whether it’s freezing winters, springtime thunderstorms, blistering summer sun, or brisk autumn winds. The Vantage Vue is solar-powered, has a backup battery, and is very easy to install — you can have it up and running in 30 minutes. Its sleek design means you get all the hyperlocal weather data you want with minimal visual impact on your landscape, yard, or roof. Vantage Vue Features: See the weather as it happens with near real-time updates on quickly changing wind, temperature, and rain data Frequency-hopping, spread spectrum radio provides transmission distances up to 1,000ft/300m and superior reception Durable design passes a minimum of 10 tests before shipping, including rigorous calibrations and material endurance Solar power energizes the station during the day and the onboard super-capacitor provides power at night; the Lithium battery provides backup when needed  Easily incorporate various Davis or third-party sensors to create a custom network of sensors tailored to your specific needs WeatherLink Console The WeatherLink Console revolutionizes the way you access, analyze, and understand your hyperlocal weather data reported by your Vantage Pro2™orVantage Vue® sensor suite, or your custom network of multiple Davis sensors. One intuitive device lets you receive and display data from your local network and connect to Wi-Fi to push your data to the WeatherLink Cloud. WeatherLink Features: Use the vibrant HD touchscreen to easily navigate, view, and analyze your weather data on one intuitive device Customize the dashboard to show up to 21 parameters – from temperature to wind to rain – and see the information that matters to you Use the full database of historical records stored right on the console to create custom graphs and analyze your data Choose from hundreds of parameters and a dozen sounds to get notified about the environmental changes you care about most  The WeatherLink Console is a fully functional and powerful data display, storage, and analysis tool on its own – no Wi-Fi required. Or you can connect to Wi-Fi to join the WeatherLink community and upload and share data safely and securely  *Mounting hardware included; mounting pole sold separately

Anemometer Transmitter Kit Product Description With Vantage Pro2, this solar-powered kit allows you to mount the anemometer in a different location than the integrated sensor suite (up to 1,000' (300M) from your wireless console/receiver). With Envoy8X, you can use this kit with any of our sensors including solar radiation, UV, temperature, anemometer, rain and third-party sensors that report in a range of 0-3 volts. For longer distances, add one or more wireless repeaters. Includes: Weather-resistant shelter for transmitter Solar panel Battery Mounting hardware Not compatible with original Vantage Pro

Pro2 Wireless Weather Station with WeatherLink Console & 24hr Fan Aspirated Radiation Shield The Vantage Pro2 weather station provides the technology and real-time data you need to respond to changing conditions and make timely decisions. Engineered to handle rugged environments and deliver data with scientific precision year after year, the economical Vantage Pro2 offers the professional weather observer, or serious weather enthusiast, a robust performance with a wide range of options and sensors. Complete Features: Accurate, reliable weather monitoring with real-time data updates every 2.5 seconds Industry-leading transmission range of 1,000’/300 m from the sensor suite to the console Outside temperature and humidity sensors in a 24-hour Fan-Aspirated Radiation Shield for maximum accuracy Mount the anemometer up to 40’/12 m from the rest of the sensor suite for flexible siting Sensor suite also includes wind speed and direction; and rainfall Sensor suite’s rugged, weather-proof housing gives you years of reliable data Includes WeatherLink Console (6313) with a vibrant, HD color touchscreen Sensor suite is solar-powered with battery backup; the console is AC-powered with battery backup WeatherLink Console The WeatherLink Console revolutionizes the way you access, analyze, and understand your hyperlocal weather data reported by your Vantage Pro2™orVantage Vue® sensor suite, or your custom network of multiple Davis sensors. One intuitive device lets you receive and display data from your local network and connect to Wi-Fi to push your data to the WeatherLink Cloud. WeatherLink Features: Use the vibrant HD touchscreen to easily navigate, view, and analyze your weather data on one intuitive device Customize the dashboard to show up to 21 parameters – from temperature to the wind to rain – and see the information that matters to you Use the full database of historical records stored right on the console to create custom graphs and analyze your data Choose from hundreds of parameters and a dozen sounds to get notified about the environmental changes you care about most  The WeatherLink Console is a fully functional and powerful data display, storage, and analysis tool on its own – no Wi-Fi required. Or you can connect to Wi-Fi to join the WeatherLink community and upload and share data safely and securely  24hr Fan Aspirated Radiation Shield: The 24-Hour Fan Aspirated Radiation Shield includes a solar- and battery-powered, motor-driven fan that draws a constant airflow through the sensor chamber. At night, when the effects of radiation are less, the fan runs on the battery. This provides more accurate temperature readings than passive shielding alone. 24hr Fan Aspirated Radiation Shield Features: A motor-driven fan draws a constant airflow through the sensor chamber at 500 feet per minute (2,5 m/s)  At night, when the effects of radiation are less, this solar-powered model runs on battery power and the airflow slows to 280 feet per minute (1,4 m/s)  Install your own sensor in the sensor chamber  Sensor chamber: (inch) 2.24” x 3” / (mm) 56.8 mm x 76.2 mm  Includes 10 plates, rechargeable batteries, mounting hardware, and 25 ft. (7,6 m) cable *Mounting hardware included; mounting pole sold separately