|
Wireless Long-Range Repeater with Solar Power
For those who wish to send weather data much farther than 1,000' (300M), the Wireless Long-Range Repeater can extend the range up to two miles (3.2 km).
Please note: Use of this product requires a pair of external antennas, sold separately.The Long-Range Repeater has a transmitting and a receiving cable, each with an end which will connect to an external antenna. Choose either our large omni directional antenna (#7656), range 1,560' (476 m) in all directions, or our Yagi directional antenna (#7660), range 5,000' (1.5 km) in one direction. You'll need two antennas for each Long-Range Repeater.
The charging system is capable of performing continuously even under low light conditions. Includes solar panel, regulator circuit, and rechargeable battery.
Compatible with Vantage Pro2 and Vantage Vue only. Not compatible with original Vantage Pro.
|
495.00 |
|
|
Wireless Repeater with Solar Power
For longer distances or to improve reception in troublesome areas, add one or more Wireless Repeaters. Transmitting and receiving range for each repeater is up to 1000' (300M) outdoors, line of sight; typical range through walls under most conditions is 200' to 400' (60 to 120M). Includes solar panel, regulator circuit, and rechargeable battery.
Use up to eight repeaters with a single wireless station, or form a network of weather stations by linking eight repeaters to eight different wireless stations.
Compatible with Vantage Pro2 and Vantage Vue only; not compatible with original Vantage Pro.
|
375.00 |
|
|
Yagi Antenna for Long-Range Repeater
Use with Long-Range Repeater (Davis 7654) to extend range up to 5,000' in one direction. Each repeater requires two antennas. You can combine one Omni and one Yagi antenna to collect data from all directions and transmit in a single direction, or vice versa.
Includes mounting hardware.
NOTE:
FCC regulations require that U.S. customers select either the Omni Antenna (#7656) or the Yagi Antenna (#7660); customer outside the U.S. must purchase third-party antennas in compliance with local regulations
|
255.68 |
|
|
Omni Antenna for Long-Range Repeater
Use with Long-Range Repeater to extend range up to 1,560' in all directions. Each repeater requires two antennas. You can combine omni and Yagi antennas to collect data from all directions and transmit in a single direction, or vice versa.Includes mounting hardware.
NOTE:
FCC regulations require that U.S. customers select either the Omni Antenna (#7656) or the Yagi Antenna (#7660); customers outside the U.S. must purchase third-party antennas in compliance with local regulations
|
255.68 |
|
|
Laing D5 710B Solar Pump
Energy Efficiency The Solar model has a feature called Maximum Power Point tracking (MPP). This feature controls the pump performance based on the power input of a solar photovoltaic panel. The Solar model can run off as little as 1 watt and will increase in speed and performance as the solar PV panel output increases. The first DC spherical motor pump for direct connection to photovoltaic panels with automatic performance optimization using Maximum PowerPoint (MPP) tracking. GPM given is max. 12-24V DC, 1-35W, 0.30-1.50 Amps with soft start.
Bronze Solar Series
6.5GPM at 0' Head (12V)
12-24VDC
1-35 Watts Adjustable
Soft Start
1/2"FNPT Ports
230Degree
150psi
|
308.17 |
|
|
**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.**
Click here to download form.
MDA-5 Hi-Power 5W SOTDMA Class B AIS Transceiver w/Built-In Antenna Splitter & Long Range Wi-Fi
Features:
The MDA-5 is the world's most sophisticated fully certified 5-Watt SOTDMA Class B AIS Moble on the market
5-Watt transmitter power, Higher Output power means your vessel will be seen at longer ranges by other vessels and via AIS websites
SOTDMA Class A Priorities means that your vessel will always transmit and be seen in very congested Commercial Harbors and Ports where traditional Class B units don"t have network priority.
Intergrated zero loss VHF antenna splitter - no second antenna needed
Built-In 802.11 b/g/n Long Range WIFI allows unit to send AIS and Position data to any WIFI connected devices
NMEA-0183 data port, NMEA-2000 & USB intelligent connectivity to all bridge systems
Built-In GPS & GLONASS satellite navigation receiver
Water Proof certified to IPX7
Dual Receivers decodes all DSC & AIS messages, including MOB & SART
Ultra-power efficient
IEC-62287-2, FCC and USCG certified
2 Year Warranty
Package Includes:
Commercial Grade External GPS Antenna with Coax Cable
Mounting hardware
Power & Data Interface cable
VHF Radio Connection cable
Product Information DVD, with ProAis2 Software for Programming & Troubleshooting
User Manual & Quick Start Guide
Specifications:
Transmitter Output Power: 5 Watts
VHF Antenna Connector SO-239 UHF
GPS Antenna Connector TNC
Frequency Range: 156.025-162.025 Mhz
Input Voltage: 9.6-31.2 VDC
Current Draw: 220mA average power consumption
Operating Temperature Range: -25C to +55xC
Ingress Protection: IP67
Dimensions (transceiver): 6.8" W x 5.0" H x 2.0" D
Weight 0.8 lbs.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1091.16 |
|
|
M364C LR Stabilzed Thermal/Visible Long Range IP Camera
PREMIUM MULTISPECTRAL MARINE CAMERAS WITH ACTIVE GYRO-STABILIZATION
Featuring a high definition low light camera and one of the most advanced FLIR thermal imaging cores, the M364C provide an elite level of awareness on the water. This camera use multispectral imaging to deliver exclusive FLIR Color Thermal Vision™(CTV) technology when used with Raymarine Axiom™ MFDs. Color Thermal Vision blends visible camera details with a thermal image, overlaying vital color imagery that allows captains to positively identify navigation aids and other vessels within the thermal scene. Outstanding imaging performance and enhanced gyro-stabilization make the M364C indispensable tools for law enforcement professionals, commercial mariners, and serious recreational boaters.
ELITE AWARENESS WITH MULTISPECTRAL IMAGING
Thermal and visible imaging featuring FLIR Color Thermal Vision and MSX®
FLIR Boson 640 × 512 thermal sensor
Thermal imaging detects objects in complete darkness, glare, and light fog
Integrate the M364C with Raymarine Axiom and take advantage of FLIR Color Thermal Vision and MSX multispectral imaging
Color Thermal Vision blends thermal and the low light visible camera so captains can easily identify color details like navigational lights and navigation aids
HIGH DEFINITION NAVIGATION
Low light HD visible imaging sensor and long-range zoom offer enhanced target identification.
Better than binoculars, the M364C with 30x optical zoom and image stabilization delivers superior long-range imaging and positive target identification
Ultra-low light camera technology provides visible imagery in the most challenging lighting conditions
Overlay AIS targets, chart objects, and waypoints in real time when combined with Raymarine Axiom and award-winning ClearCruise™ augmented reality technology
A STEADY VIEW IN ROUGH SEAS
Steady, stable viewing in heavy seas keeps eyes on-target.
Two-axis mechanical stabilization virtually eliminates the effects of pitch, heave, and yaw
Horizontal stabilization automatically keeps the camera positioned in the same direction as the vessel turns
Integrated AHRS (Attitude Heading Reference Sensor)
Included:
M300 Camera
Camera base-seal
Camera gasket
RayNet-to-RJ45 adaptor cable 120 mm (4.72 in.)
Right-angled RayNet-to-RayNet cable 3 m (9.8 ft.)
Right-angled HD-SDI video cable (with BNC connectors) 3 m (9.8 ft.)
Right-angled power/NMEA 0183/video cable 3 m (9.8 ft.)
Mounting riser
3 x camera fixings: nuts, dome nuts, spring and flat washers, threaded studs
2 x self-adhesive decals (for ball-down mounting only)
Documentation pack
|
36294.50 |
|
|
Black Q24D Quantum 2 Doppler Radar with 10M Power & Data Cables
Keep inexperienced boaters and hidden dangers at bay, even in the most congested waterways.
Quantum™ 2 with Doppler collision avoidance technology makes it easy to discern potentially dangerous targets when navigating in high-traffic areas. Using advanced Doppler processing, Quantum 2 instantly highlights moving radar contacts and color codes to indicate whether they are inbound or outbound.
Features:
Black radome enclosure
WiFi and Ethernet
10M power and data cables are included
Quantum 2 Doppler Radar, perfect for sailboats, RIBs, and smaller powerboats
Available as a standalone scanner with power and data cable
Provides excellent short-range detection and enhanced target detail with an 18’ (6m) minimum range
Simplified, fast installation, and the ability to utilize existing Raymarine scanner fixing points
Once installed, Quantum 2 starts right up and immediately provides awareness
Quantum 2 Black: Stay Aware With Style
Offering confident radar navigation and style, Quantum 2 Black adds a level of sophistication to any vessel.
Quantum 2 Black offers the same performance and safety-enhancing Doppler target tracking as the original white Quantum 2 in premium black housing.
Superior Collision Avoidance
Raymarine Quantum 2 Doppler target processing identifies and color codes moving radar contacts for instant recognition and reduced risk of collision.
Quantum 2 MARPA mode provides an effective means of dangerous target tracking and is the same technology trusted by the United States Coast Guard.
What’s In The Box:
18 in. black radome
Power cable 10M (32.8 ft.)
Data cable 10M (32.8 ft.)
Fixing bolts with spring washers and flat washers (M8) x 4
Documentation
General Specifications:
Dimensions (Diameter|Height): 541.0 mm|209.5 mm
Weight: 5.6 kg
Supply Voltage: Either 12 V dc or 24 V dc nominal
Minimum: 10.8 V dc | Maximum: 31.2 V dc
Operating Voltage Range: Minimum: 10.8 V dc | Maximum: 31.2 V dc
Power Consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2 W
Waterproofing: IPX6
Operating Temperature Range: -10°C to +55°C
Storage Temperature Range: -25°C to +70°C
Additional Storage Conditions: Store upright; do not block vents on the underside
Humidity: Up to 95% at 35°C
Maximum wind speed: 100 kts
Transmitter Specifications:
Type: X-band solid-state transmitter with pulse compression technology
Transmit Frequency: 9354 MHz to 9446 MHz
Peak Power Output: 20W
Duplexer: Circulator
Pulse Widths (3 dB): 40 ns to 14.7 us
Chirp Lengths: 400 ns to 22 us
Pulse Repetition Frequency: 920 Hz to 5900 Hz
Chirp Bandwidth: Up to 32 MHz
Standby Mode: Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link – ON
Antenna Specifications:
Type: Patch Array
Beamwidth (nominal): Horizontal: 4.9° | Vertical: 20°
Polarization: Horizontal
Rotation Speed: 24 rpm nominal
Receiver Specifications:
IF Frequency: 26 MHz
Noise Figure: Less than 4 dB
Doppler Specifications:
Target Tracking: Tracking of 25 simultaneous MARPA and/or ARPA targets
Target Filtering: True Motion Mode identifies only those objects that are moving relative to the vessel
Compatibility Specifications:
Radar Type: Quantum 2 with Doppler
MFD Compatibility: Axiom and Axiom Pro
Perfect for: Sailboats, RIBs, and smaller powerboats
Type: Solid State CHIRP Pulse Compression with Doppler target tracking
Range Performance: 24NM
Performance: Lightweight and easy to install. Excellent short and long-range performance. Detect targets as close as 18ft
Automatic Bird Mode: No
MARPA Target Tracking: Yes
Radar Specifications:
Transmitter Type: X-band solid-state transmitter with pulse compression technology
Target Tracking: Track up to 25 simultaneous Radar targets
Standby Mode: Rotation: OFF, Transmission: OFF, Wi-Fi: ON
Antenna Type: Patch Array
Noise: Less than 4 dB
Beamwidth (nominal): Horizontal: 4.9°, Vertical: 20°
Polarization: Horizontal
Duplexer: Circulator
Transmit Frequency: 9354 MHz to 9446 MHz
Pulse Repetition Frequency: 920 Hz to 5900 Hz
CHIRP Lengths: 400 ns to 22 µs
Pulse widths (3 dB)
40 ns to 14.7µs
IF Frequency: 26 MHz
Rotation Speed: 24 RPM
Peak Power Output: 20 W
Conformance:
Standards: USA: 47CFR FCC Part 2 & Part 80 Certificate of Approval, Canada: RSS138 Iss. 1 Technical Acceptance Certificate, European Union & EFTA: Radio Equipment Directive 2014/53/EU Certificate of Opinion, Australia / New Zealand: ACMA Declaration of Conformity Compliance level 3
Environmental Specifications:
Relative Humidity: Up to 95% @ 35°C (95°F)
Additional Storage Conditions: Store upright; do not block vents on the underside
Waterproof Rating: IPx6
Storage Temperature: -25°C to +70°C (-13°F to 158°F)
Maximum Wind Speed: 100 knots
Operating Temperature: -10°C to +55°C (14°F to 131°F)
Physical Specifications:
Dimensions: Height: 209.5 mm (8.25 in), Diameter: 541.0 mm (21.3 in)
Weight: 5.6 kg (12.35 lbs)
|
3047.49 |
|
|
Black Q24D Quantum 2 Doppler Radar with 15M Power & Data Cables
Keep inexperienced boaters and hidden dangers at bay, even in the most congested waterways.
Quantum™ 2 with Doppler collision avoidance technology makes it easy to discern potentially dangerous targets when navigating in high-traffic areas. Using advanced Doppler processing, Quantum 2 instantly highlights moving radar contacts and color codes to indicate whether they are inbound or outbound.
Features:
Black radome enclosure
WiFi and Ethernet
15M power and data cables are included
Quantum 2 Doppler Radar, perfect for sailboats, RIBs, and smaller powerboats
Available as a standalone scanner with power and data cable
Provides excellent short-range detection and enhanced target detail with an 18’ (6m) minimum range
Simplified, fast installation, and the ability to utilize existing Raymarine scanner fixing points
Once installed, Quantum 2 starts right up and immediately provides awareness
Quantum 2 Black: Stay Aware With Style
Offering confident radar navigation and style, Quantum 2 Black adds a level of sophistication to any vessel.
Quantum 2 Black offers the same performance and safety-enhancing Doppler target tracking as the original white Quantum 2 in premium black housing.
Superior Collision Avoidance
Raymarine Quantum 2 Doppler target processing identifies and color codes moving radar contacts for instant recognition and reduced risk of collision.
Quantum 2 MARPA mode provides an effective means of dangerous target tracking and is the same technology trusted by the United States Coast Guard.
What’s In The Box:
18 in. black radome
Power cable 15M (49.2 ft)
Data cable 15M (49.2 ft)
Fixing bolts with spring washers and flat washers (M8) x 4
Documentation
General Specifications:
Dimensions (Diameter|Height): 541.0 mm|209.5 mm
Weight: 5.6 kg
Supply Voltage: Either 12 V dc or 24 V dc nominal
Minimum: 10.8 V dc | Maximum: 31.2 V dc
Operating Voltage Range: Minimum: 10.8 V dc | Maximum: 31.2 V dc
Power Consumption: Transmit mode (maximum): 17 W | Standby mode: 7 W | Sleep mode (applies only to radars connected via Wi-Fi): 2 W
Waterproofing: IPX6
Operating Temperature Range: -10°C to +55°C
Storage Temperature Range: -25°C to +70°C
Additional Storage Conditions: Store upright; do not block vents on the underside
Humidity: Up to 95% at 35°C
Maximum wind speed: 100 kts
Transmitter Specifications:
Type: X-band solid-state transmitter with pulse compression technology
Transmit Frequency: 9354 MHz to 9446 MHz
Peak Power Output: 20W
Duplexer: Circulator
Pulse Widths (3 dB): 40 ns to 14.7 us
Chirp Lengths: 400 ns to 22 us
Pulse Repetition Frequency: 920 Hz to 5900 Hz
Chirp Bandwidth: Up to 32 MHz
Standby Mode: Scanner rotation - OFF | Scanner transmission - OFF | Wi-Fi link – ON
Antenna Specifications:
Type: Patch Array
Beamwidth (nominal): Horizontal: 4.9° | Vertical: 20°
Polarization: Horizontal
Rotation Speed: 24 rpm nominal
Receiver Specifications:
IF Frequency: 26 MHz
Noise Figure: Less than 4 dB
Doppler Specifications:
Target Tracking: Tracking of 25 simultaneous MARPA and/or ARPA targets
Target Filtering: True Motion Mode identifies only those objects that are moving relative to the vessel
Compatibility Specifications:
Radar Type: Quantum 2 with Doppler
MFD Compatibility: Axiom and Axiom Pro
Perfect for: Sailboats, RIBs, and smaller powerboats
Type: Solid State CHIRP Pulse Compression with Doppler target tracking
Range Performance: 24NM
Performance: Lightweight and easy to install. Excellent short and long-range performance. Detect targets as close as 18ft
Automatic Bird Mode: No
MARPA Target Tracking: Yes
Radar Specifications:
Transmitter Type: X-band solid-state transmitter with pulse compression technology
Target Tracking: Track up to 25 simultaneous Radar targets
Standby Mode: Rotation: OFF, Transmission: OFF, Wi-Fi: ON
Antenna Type: Patch Array
Noise: Less than 4 dB
Beamwidth (nominal): Horizontal: 4.9°, Vertical: 20°
Polarization: Horizontal
Duplexer: Circulator
Transmit Frequency: 9354 MHz to 9446 MHz
Pulse Repetition Frequency: 920 Hz to 5900 Hz
CHIRP Lengths: 400 ns to 22 µs
Pulse widths (3 dB)
40 ns to 14.7µs
IF Frequency: 26 MHz
Rotation Speed: 24 RPM
Peak Power Output: 20 W
Conformance:
Standards: USA: 47CFR FCC Part 2 & Part 80 Certificate of Approval, Canada: RSS138 Iss. 1 Technical Acceptance Certificate, European Union & EFTA: Radio Equipment Directive 2014/53/EU Certificate of Opinion, Australia / New Zealand: ACMA Declaration of Conformity Compliance level 3
Environmental Specifications:
Relative Humidity: Up to 95% @ 35°C (95°F)
Additional Storage Conditions: Store upright; do not block vents on the underside
Waterproof Rating: IPx6
Storage Temperature: -25°C to +70°C (-13°F to 158°F)
Maximum Wind Speed: 100 knots
Operating Temperature: -10°C to +55°C (14°F to 131°F)
Physical Specifications:
Dimensions: Height: 209.5 mm (8.25 in), Diameter: 541.0 mm (21.3 in)
Weight: 5.6 kg (12.35 lbs)
|
3104.99 |
|
|
Module 70 Gen 4 LED Floodlight - White Housing - Long Range - 2100 Lumens
The popular Module 70 LED floodlight has been seriously upgraded. Now producing 2100 lumens light output for only 21W consumption. The housing is also finished in a new premium Corosafe coating for even more resistance in extreme operating conditions.
Despite its small dimensions, the new Module 70 Gen 4 has three high-performance LEDs that generate 2100 lumens of crisp white light while consuming just 21W of power. (1.75A @ 12V DC)
The close-range lens offers a wide and even distribution, ideal for cockpit, foredeck, and work area illumination.
Completely sealed (IP6K9K) and coated with the new CoroSafe technology this lamp is particularly suitable for the tough marine environment. Offering improved protection from damage with two extra layers and the combination of different coating processes, making the work lamp substantially more resistant to corrosion.
Advanced Multivolt 9-33V electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery conditions. Pre-wired with marine cable and a single bolt 316 stainless steel bracket, this work light can be installed quickly.
Like all Hella marine LED lamps Module 70 is supported with a 5-year warranty for
complete peace of mind.
Features:
LED
12/24V Multivolt
IP67 Completely Sealed
UV Resistant
5-Year Warranty
Specifications:
Material Description: UV and impact-resistant plastic front housing
Die-cast aluminum body
Glass lens
Bracket: 316 stainless steel
2100 Lumens
Color Temperature: 6500K
Cable: Pre-wired with 2.0m of twin core marine cable
Operating Voltage: Multivolt 9-33V DC
Degree of Protection: IP 67 - Completely Sealed
Power Consumption: 21W (1.75A@12V DC/0.88A@24V DC)
Cable: Pre-wired with 1M marine cable
Installation: Upright or pendant
|
200.51 |
|
|
Module 70 Gen 4 LED Floodlight - White Housing - Long Range - 800 Lumens
Durable and efficient LED floodlights offering power-saving illumination.
Capitalizing on the electronic and optical performance of the larger body LED Mega Beam series, Hella marine Module 70 LED lamps offer state-of-the-art technology and performance in a smaller housing.
Offering 800 lumens of crisp white light for a low power consumption of 15W (1.25A @ 12V), the compact high technology lamps provide substantial power savings compared to 55W halogen lamps.
The completely sealed module 70 series provides ultra-durable ‘fit and forget’ advantages with ongoing reliability in applications subject to high vibration, impact, and shock loads.
Features:
LED
12/24V Multivolt
IP67 Completely Sealed
UV Resistant
800 Lumens
5-Year Warranty
Specifications:
Material Description: UV and impact-resistant plastic front housing
Die-cast aluminum body
Glass lens
Bracket: 316 stainless steel
Color Temperature: 6500K
Cable: Pre-wired with 2.0m of twin core marine cable
Operating Voltage: Multivolt 9-30V DC
Degree of Protection: IP 67 - Completely Sealed
Power Consumption: 13W (<1.08A@12V / <0.54A@24V)
Weight: 500g (including cable)
Light Output: 800 lumens (Gen III)
Approvals: CE
|
133.67 |
|
|
Long-Range VHF Antenna
Increase your tracking range with this 22-1/2" flexible, long-range antenna.
Compatible Devices:
Alpha™
Astro®
DC™ 50 Dog Tracking Collar
PRO Trashbreaker™
TB 10 Dog Device (PRO Trashbreaker)
TT™ 10 Dog Device
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
15.59 |
|
|
Smart Battery Sense Long Range (Up to 10M)
The VE.Bus Smart dongle is a Bluetooth Smart enabled VE.Bus interface, with battery temperature-and-voltage sensing. It communicates system information straight to your smart phone - using the free-to-use VictronConnect app. When used with Multi- inverter/chargers the dongle provides on-battery temperature and voltage sensing capabilities - allowing compensation for possible cable losses which can occur during charging and discharging. Temperature sensing allows accurate temperature-compensation during battery charge cycles. The dongle is, at present, the only way to add an “on-battery” sensing capability to the MultiPlus-II models, if they are not also connected to a GX device and CANbus battery.
The dongle can be used in systems with or without a GX device - such as the CCGX. In systems with a GX device, and another source of temperature and voltage data (eg from a CANbus battery), the CCGX data will override temperature and voltage information from the dongle. In this role the dongle will still provide live-information via its VictronConnect interface; and it will provide firmware updates without requiring an internet connection.
When the dongle is used in systems which do not have a GX device, the dongle's voltage and temperature data becomes the primary source of that information, and can be used by other connected devices for voltage compensation.
In systems with a Multiplus-II, dongle and GX device, but no other source of temperature and voltage, the data from the dongle will also be used.
At this time, the VE.Bus Smart dongle cannot send its temperature and voltage data as part of a VE.Smart network.
The VE.Bus Smart dongle is able to sense battery temperature in two ways: The default method is the dongle's on-board temperature sensor. When the dongle is mounted directly onto the battery case (using its adhesive attachment) it will sense the battery temperature directly from the battery casing. The second method - which provides improved battery temperature sensing - is available by using an optional battery-terminal mounted sensor. When this sensor is connected, the default sensor is overridden and the dongle will use this method instead.
What's in the Box?
VE.Bus Smart Dongle
Red battery (+) connection wire with 10mm eyelet and inline fuse.
Black battery (-) connection wire with 10mm eyelet
Connector block with screw terminals
Warranty Info
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Please contact your dealer for any returns, repairs or support issues related to this product.
|
46.92 |
|
|
1st Watch Wireless Radar w/o Power Cable
Untether & Explore - Furuno 1st Watch Wireless Radar, that you can access directly from your iOS devices.
Move Around & Explore
With Furuno's 1st Watch Wireless Radar, you can do things previously impossible. You can bring the Radar display whenever you go, even put it on the iPhone in your pocket. Since the display is untethered, you are free to roam the vessel while maintaining full situational awareness of your surroundings. For example, you can bring the Radar display with you when jumping into the cabin quickly to grab fishing gear or other tools needed during your voyage.
Easy To Use At 1st Glance
Plug in the Radar, set up the free app from App Store and you're good to go. With familiar gestures it's a breeze to use; you can even use two iOS devices simultaneously. The app has been created with simplicity and efficiency in mind, providing reliable information that is easily accessible.
Features:
4kW Radar antenna, powerful yet compact in size (same housing as DRS2D)
Wireless LAN, first Radar in the world accessible from your iOS devies
No extra wiring needed except the power source, making installation a breeze
Exceptionally simple setup and intuitive operation with user-friendly and free iOS app
Extremely economical power consumption
Vivid, multi-color Radar target presentation (1/8nm - 24nm)
Simple touch interface with familiar gestures
User selectable range scale from 0.125 to 24 nm
Simultaneously connect and utilize 2 iOS devices, via high-sensitivity wireless signal
Power Cable sold as an accessory. 001-266-010-00
Power Requirements:
12-24 VDC
Only 24W
*Please note: iOS devices and accessories are sold separately and do not come included with this product.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1161.54 |
|
|
NXL 8-Channel Full-Range Class D Marine/Powersports Amplifier - 8 x 150W RMS, 4-Ohm
Elevate your marine sound experience to new heights with DS18's NXL-X1200.8D. Designed to deliver the best performance for your marine speakers, this digital class 8-channel amplifier is the ultimate choice for those who refuse to settle for anything less than exceptional.
Not only does DS18's NXL-X1200.8D deliver unparalleled performance, but it’s also IP67 Waterproof Rated, protecting against water intrusion. Additionally, this amplifier is built to withstand harsh marine conditions with its UV, Salt, and Fog protection. It's designed to endure whatever nature throws at it without compromising sound quality.
With its Direct Power harness design featuring marine-grade OFC tinned wires, this amplifier ensures optimal power transfer and efficiency. Every detail has been carefully crafted to provide you with a seamless and hassle-free installation process.
Experience the future of marine amplification with the latest digital amplifier design and SMC technology. This cutting-edge combination enhances audio clarity and precision, allowing you to enjoy every note with exceptional clarity and detail.
Prepare to be blown away by the NXL-X1200.8D's staggering performance, delivering 8 x 150W RMS at 4 ohms, 8 x 220W RMS at 2 ohms, and 4 x 450W RMS @ 1 ohm. These power settings are guaranteed to supercharge any custom marine build.
Don't settle for mediocre sound on your boat or power sports vehicle. Upgrade to the DS18 NXL-X1200.8D Marine & Powersports Digital Amplifier and unleash the true potential of your marine speakers.
Features:
Marine Full Range
8 Channel
8 X 150 Watts @ 4 Ohms
Built-in Crossover
Class D
Water Resistant - IP67
Technical Specifications:
Number of Channels - 8
Frequency Response - 10Hz-20Khz
4 Ohm RMS Power - 8 x 150W
2 Ohm RMS Power - 8 x 220W
Signal-to-Noise Ratio - >80dB
Product Dimensions (L x W x H) - 14" x 4.4" x 1.77"
|
959.94 |
|