|
High-Speed Multi-Charger
Add 2 high-speed USB ports to your vehicle's 12 V outlet without losing the ability to power your compatible device. Use each USB port to charge a phone, tablet or any other device that needs power on the go.
INPUT : 10-30v 5.4A max
Output USB : 4.75-5.25v 2.1A
Output Socket : 10v 2.4A max ->30v 0.8A max
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
38.39 |
|
|
High-Speed HDMI Cable
Use this 15-foot cable to connect your compatible Garmin marine product to an HDMI device. The water-resistant and secure connection supports 4K video and audio playback. Refer to your device owner’s manual for more information on supported A/V features.
|
62.99 |
|
|
6-Unit Rapid Multi-Charger for M37 Handheld Radios
The BC-238 is a 12V six-slot multi-charger for the IC-M37 Marine VHF radio.
As well as providing a convenient tool for charging multiple IC-M37E handhelds, it also provides an ideal and logical location for storing multiple radios while in or out of use. Six slot chargers reduce the chance that someone might need to track down a misplaced radio by offering users the option to slot a radio back in its charger when a conversation is "over and out" or indeed when a day’s work or sailing is over.
The BC-238 charger is an ideal charging/storage solution for many applications. Commercial users or sailing and yacht clubs plus activity centers or organizations that will use the IC-M37E for their daily activities.
The BC-238 comes as standard with six built-in AD-138 charger cups and a 12V power lead, it complies with the EC60945 standard which is required for marine equipment and is intended to be powered on board from a 12V supply.
For those who wish to use 230V mains power, please ask for a BC-157-M37 which is available separately.
|
392.45 |
|
|
6-Unit Multi Charger
The SAD-1460 is a rugged 6-Unit Multi Charger that enables recharging of Lithium-Ion battery pack for Yaesu transceivers.
Specifications:
Charging Current: 1000mA ± 100mA
Chargin Time: 1.5 - 3.5 hours (Depends on Battery Pack)
Operating Temperature Range: +32°F to +104°F (0°C to +40°C)
|
352.18 |
|
|
Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (10-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Bronze Thru-Hull with Speed and Temperature
30 Foot Cable with 10-Pin Connector
High-Speed Fairing Block Included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
480.00 |
|
|
ID20 High-Speed Inflator/Deflator 12V Portable Pump with Multiple Valve Options
The iD20 Hi-Speed Inflator provides reliability and flexibility, allowing for rapid inflation and deflation of almost all inflatables. Simple to operate and with a powerful 300W motor, this lightweight and portable air pump will ensure you waste no time getting your inflatable ready for use.
With many valve options, you will be able to inflate/deflate almost any inflatable product with no effort and in no time at all.
Features:
Inflates a four-man dinghy in less than two minutes
Deflates, removing every last ounce of air for easy storage
Adjustable nozzles for almost all inflatables and valve types
High flow and pressure pump design – 20 ft/min (550 l/min) @ 2.6 psi
12 Volts (Max current draw: 25 amps)
10 ft. cable length with battery clips
The air release valve protects from over-inflating and overheating
WARNING: This product can expose you to chemicals including COBALT METAL POWDER which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
83.47 |
|
|
Bronze Thru-Hull Multisensor w/ High-Speed Fairing Block, 600w (8-Pin)
600 Watts
50/200 kHz
40/10 degree Beam Angles
Bronze Thru-Hull with Speed and Temperature
30 Foot Cable with 8-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
426.67 |
|
|
Optional High Speed Transom Mount Transducer
600 Watt Optional High Speed transom mount transducer with depth speed and temperature. Dual Frequency 200/50 KHz. (P66)
Compatible with the following Echo Sounders:
SL Series: SL755RC, SL760RC , SL1250, and SL1250RC
hsb2 Plus Series: L755RC, L760, L760RC, L1250,and L1250RC
hsb2 HDFI Series: DSM250, L770D, L770DRC, L1260D, and L1260DRC
Compatible hull material: metal, wood and fiberglass
Max Power: 600 W
Frequency: 200/50 kHz
Beam Angles: 200 kHz 11 50 kHz 45
Features:
30ft (10m) Cable
Replaceable paddle wheel assembly
**requires E66066 adapter cable to go the Raymarine a,c,e,eS Series
|
204.53 |
|
|
525TID-BHD Bronze Thru-Hull Transducer with Temp and High-Speed Fairing Block
1kw
50/200 kHz with Diplexer
15x21 degree Beam Angle at 50 khz
3x5 degree Beam Angle at 200 kHz
Bronze Thru-Hull with Temperature
10-Pin Connector
Ships with High-Speed Fairing Block AIR-033-523
The Clear Choice
This new 1 kW transducer makes 600 W fishfinders perform like their more powerful big brothers especially at 50 kHz. The B258 is 25 times more sensitive that a single element 50/200 kHz transducer. How does it do it? The B258 uses Airmars new and unique ceramic-element construction. The resulting narrow beams will clearly distinguish individual fish and bottom fish from their habitat at up to 2,200 feet.
Streamlined Performance
Maximize performance by installing the B258 with our custom fit high-performance fairing. At speeds over 30 knots, screen displays show clear images and a clean bottom trace.
Supercedes B256 transducer, with significant increase in performance at 50 kHz.
Recommended for sport fishing boats above 26' (8m) and small to mid size commercial fishing boats.
Includes temperature sensor
Transducer ID option
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
960.00 |
|
|
March Mag-Drive Centrifugal Pumps Bronze 115V High Speed 4.5GPM
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 115V High Speed 4.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet
|
443.63 |
|
|
March Mag-Drive Centrifugal Pumps Bronze 230V High Speed 4.5GPM
The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated.
• Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries.
• Maximum liquid temperature for the 809 and 815 series is 250 F.
• Port configurations include in-line and center inlet with side discharge.
• Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic.
• There are many motor options available Including AC, DC and High Speed versions for added flow.
March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 230V High Speed 4.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet
|
417.30 |
|
|
19° High Speed Transducer Summer Kit for FL-8 & 18 Flashers
Once the ice fishing season is over, it's time to shift to the open water. Vexilar offers several open water conversion kits to meet your needs. Depending on where and how you want to mount your unit, there are three types of transducers to choose from; High Speed, Puck Style, or AlumaDucer. Transom Mount Kits Choose the High Speed transom mount transducer for aluminum or wood hull boats. This transducer style will maintain readings while the boat is up on plane. It mounts on the lower transom of the boat. Puck Transducer Kits Choose the Puck Style if you plan on mounting to an electric trolling motor or for in-hull mounting applications for fiberglass boats. AlumaDucer Kits The AlumaDucer kit allows in-hull mounting with an aluminum hull. With this method, you can get high speed readings without the worry of damaging a transducer mounted on the outside of the boat. Learn more about the AlumaDucer here.
Features:
Includes transducer, flasher gimbal bracket, and power cable.
Contains all the hardware you need to achieve a professional mounting job.
Your choice of transducer style and beam angle.
Complete instructions are also included.
Specifications:
Quality Barium Titanate crystal
Earth-grounded cable construction
25 feet of cable
One year warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
110.40 |
|
|
Open Water Conversion Kit with 12° High Speed Transducer Summer Kit for FL-8 & 18 Flashers
Once the ice fishing season is over, it's time to shift to the open water. Vexilar offers several open water conversion kits to meet your needs. Depending on where and how you want to mount your unit, there are three types of transducers to choose from; High Speed, Puck Style, or AlumaDucer. Transom Mount Kits Choose the High Speed transom mount transducer for aluminum or wood hull boats. This transducer style will maintain readings while the boat is up on plane. It mounts on the lower transom of the boat. Puck Transducer Kits Choose the Puck Style if you plan on mounting to an electric trolling motor or for in-hull mounting applications for fiberglass boats. AlumaDucer Kits The AlumaDucer kit allows in-hull mounting with an aluminum hull. With this method, you can get high speed readings without the worry of damaging a transducer mounted on the outside of the boat. Learn more about the AlumaDucer here.
Features:
Includes transducer, flasher gimbal bracket, and power cable.
Contains all the hardware you need to achieve a professional mounting job.
Your choice of transducer style and beam angle.
Complete instructions are also included.
Specifications:
Quality Barium Titanate crystal
Earth-grounded cable construction
25 feet of cable
One year warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
110.40 |
|
|
9° High Speed Transducer Summer Kit for FL-8 & 18 Flashers
Once the ice fishing season is over, it's time to shift to the open water. Vexilar offers several open water conversion kits to meet your needs. Depending on where and how you want to mount your unit, there are three types of transducers to choose from; High Speed, Puck Style, or AlumaDucer. Transom Mount Kits Choose the High Speed transom mount transducer for aluminum or wood hull boats. This transducer style will maintain readings while the boat is up on plane. It mounts on the lower transom of the boat. Puck Transducer Kits Choose the Puck Style if you plan on mounting to an electric trolling motor or for in-hull mounting applications for fiberglass boats. AlumaDucer Kits The AlumaDucer kit allows in-hull mounting with an aluminum hull. With this method, you can get high speed readings without the worry of damaging a transducer mounted on the outside of the boat. Learn more about the AlumaDucer here.
Features:
Includes transducer, flasher gimbal bracket, and power cable.
Contains all the hardware you need to achieve a professional mounting job.
Your choice of transducer style and beam angle.
Complete instructions are also included.
Specifications:
Quality Barium Titanate crystal
Earth-grounded cable construction
25 feet of cable
One year warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
141.60 |
|
|
19° High Speed Transducer Summer Kit for FL-12 & 20 Flashers
Once the ice fishing season is over, it's time to shift to the open water. Vexilar offers several open water conversion kits to meet your needs. Depending on where and how you want to mount your unit, there are three types of transducers to choose from; High Speed, Puck Style, or AlumaDucer. Transom Mount Kits Choose the High Speed transom mount transducer for aluminum or wood hull boats. This transducer style will maintain readings while the boat is up on plane. It mounts on the lower transom of the boat. Puck Transducer Kits Choose the Puck Style if you plan on mounting to an electric trolling motor or for in-hull mounting applications for fiberglass boats. AlumaDucer Kits The AlumaDucer kit allows in-hull mounting with an aluminum hull. With this method, you can get high speed readings without the worry of damaging a transducer mounted on the outside of the boat. Learn more about the AlumaDucer here.
Features:
Includes transducer, flasher gimbal bracket, and power cable.
Contains all the hardware you need to achieve a professional mounting job.
Your choice of transducer style and beam angle.
Complete instructions are also included.
Specifications:
Quality Barium Titanate crystal
Earth-grounded cable construction
25 feet of cable
One year warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
110.40 |
|