|
Marine
Built to withstand extreme nautical environments. And float in them. We suggest you keep them on board, but made our Marine™ series binoculars buoyant, waterproof and corrosion resistant, so a little dunking won't deep-six your day. You'll appreciate the ultra-bright, crisp views granted by their multi-coated optics and premium BaK-4 prism glass. Rugged rubber armoring provides a sure grip, absorbs shock and keeps them from sliding in rough conditions. They're essential equipment if you spend much time on deck, and aren't fazed by a little time off it.
Features
BaK-4 porro prisms for bright, clear, crisp viewing
Fully Multi-coated optics for superior light transmission and brightness
100% waterproof / fogproof
O-ring sealed and nitrogen-purged to keep out moisture
Highly resistant to saltwater corrosion
Non-slip, non-skid rubber armor cushions bumps and shock, prevents sliding and provides a firm grip when wet
Hermetically sealed
Fold-down eyecups
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
160.36 |
|
|
Marine
Built to withstand extreme nautical environments. And float in them. We suggest you keep them on board, but made our Marine™ series binoculars buoyant, waterproof and corrosion resistant, so a little dunking won't deep-six your day. You'll appreciate the ultra-bright, crisp views granted by their multi-coated optics and premium BaK-4 prism glass. Rugged rubber armoring provides a sure grip, absorbs shock and keeps them from sliding in rough conditions. They're essential equipment if you spend much time on deck, and aren't fazed by a little time off it.
Features
BaK-4 porro prisms for bright, clear, crisp viewing
Fully Multi-coated optics for superior light transmission and brightness
100% waterproof / fogproof
O-ring sealed and nitrogen-purged to keep out moisture
Highly resistant to saltwater corrosion
Non-slip, non-skid rubber armor cushions bumps and shock, prevents sliding and provides a firm grip when wet
Hermetically sealed
Fold-down eyecups
|
210.47 |
|
|
Spectator 10 x 50 Binocular
Spectator Sport 10 x 50 mm. Binoculars are designed to see all the action right out of the box. PermaFocus technology brings distant objects close with no adjustments necessary. The rugged armor housing is waterproof, handling all outdoor activities and perfect for boating. Four included color tiles can customize your binoculars to support your favorite teams. Action happens fast, whether you're at the soccer field or the stadium. Bushnell Spectator Sport binoculars are designed to see it all.
Features:
10 x 50mm
Porro prism
Fully multicoated lenses
PermaFocus keeps distant objects in focus
Water, rain and fog-resistant
|
86.92 |
|
|
Spectator 12 x 50 Binocular
Bushnell Spector sport binoculars, 12x50mm. Features: - keeps distant objects in focus, eliminating need for constant adjustment - four color tiles included to customize your binocular - waterproof construction - Nitrogen purge - lead free glass - multi coated optics. Specifications: - magnification: 12x50mm - Prism system: porro - Prism glass: BaK-4 - field of view at 1000 yards: 265' - close focus: 200' - exit Pupil: 4.20mm - eye relief: 11mm - eyecups: twist-up - length: 6.30 inch - weight: 31 oz - finish: black
Features:
Keeps distant objects in focus, eliminating need for constant adjustment
Four color tiles included to customize your binocular
Waterproof construction
|
97.14 |
|
|
Venture Folding Roof Prism Binocular - 10 x 50
Hunters can wait hours or even days for an opportunity of a lifetime. Specifically designed for hunters and outdoor enthusiasts, Simmons® Venture™ binoculars will make sure you're ready when this chance presents itself. Fully multi- coated lenses transmit the maximum amount of light, revealing the finest of details even at first and last light when game is most active.
Available in five configurations, Simmons® Venture™ binoculars can go anywhere arming you with quality optics when you need it most.
Features:
Finish: Black
10 x 50
Porro
BK7
Fully Multi Coated
Field of View: 325' at 100 yards/99.06M at 100M
Eye Relief: 15.24mm
Exit Pupil: 4mm
Short Focus: 9m
Waterproof/Fogproof: No
Adapt to Tripod: Yes
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
63.59 |
|
|
Yellow Floating Strap for Navigator Pro 7 x 30 ClicLoc® Binoculars
Padded in a visible yellow, long-lasting waterproof jacket, the Steiner marine binocular Float Strap with ClicLoc® adapts to most marine binoculars.
Compatible with:
Navigator Pro 7 x 30 Binocular with or without a compass
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
67.19 |
|
|
Smart Tab Trim Tabs 7 X 8 f/10-12' Boats w/8-18 HP
IMPROVES YOUR BOAT'S OVERALL PERFORMANCE - GUARANTEED!!!
If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.
Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and perform better for less money?
Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.
Reduce the minimum planning speed by up to 33%
Faster Acceleration
Increase top speed
Provide a level, more comfortable ride at lower speeds
Improve fuel economy, handling and safety
NO HYDRAULICS - NO ELECTRIC SWITCHES
Nauticus trim tabs are completely automatic requiring no operator adjustment while underway.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.
(see installation instruction).
SPEED REGULATED
Nauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.
Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.
BOAT STABILIZERS
Even when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.
ONE OF A KIND
The unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance.
It will reduce the minimum planning speed by 33%
Provide a level, more comfortable ride at lower speeds
Improve economy, handling and safety
As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.
The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.
INSTALLATION IS SIMPLE
With an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.
All mounting hardware, instructions, and templates are included.
SMART TABS require NO THROUGH HULL DRILLING
|
108.55 |
|
|
Smart Tab Trim Tabs 7 X 8 f/10-12' Boats w/20-25 HP
IMPROVES YOUR BOAT'S OVERALL PERFORMANCE - GUARANTEED!!!
If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.
Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and perform better for less money?
Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.
Reduce the minimum planning speed by up to 33%
Faster Acceleration
Increase top speed
Provide a level, more comfortable ride at lower speeds
Improve fuel economy, handling and safety
NO HYDRAULICS - NO ELECTRIC SWITCHES
Nauticus trim tabs are completely automatic requiring no operator adjustment while underway.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.(see installation instruction).
SPEED REGULATED
Nauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.
BOAT STABILIZERS
Even when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.
ONE OF A KIND
The unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance.
It will reduce the minimum planning speed by 33%
Provide a level, more comfortable ride at lower speeds
Improve economy, handling and safety
As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.
The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.
INSTALLATION IS SIMPLE
With an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.
All mounting hardware, instructions, and templates are included.
SMART TABS require NO THROUGH HULL DRILLING
|
108.55 |
|
|
5" Stainless Steel Power Mount - 7" x 7" Base - f/Garmin/Raymarine 3G/4G Radar
Includes ADA-R1 modular top plate.
Seaview Stainless Steel Radar Mounts are 5" tall and aft leaning. The 7" x 7" base plate utilizes a small footprint, great for installations where space is limited. The body is made out of 316 stainless steel.
This Seaview stainless steel mount is also light bar compatible with Seaview stainless steel light bars. The stainless steel light bars come pre-wired and are USCG approved for boats up to 20 meters (65.6 ft.) in length.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
465.60 |
|
|
Winch Cable and Hook
7/32" x 50' galvanized cable, 5,600 lb. breaking strength
WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
45.70 |
|
|
F-10 Twin Eye Fender 18" x 50" - White
Polyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.
The F Series fender has offered protection to the world's finest yachts and fishing vessels. Why? Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice!
Classic European twin-eye style boat fenders for the most discerning eye.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 18" x 50" (45.7 x 127cm)
Eye Diameter - 1" (2.54cm)
Circumference - 56.6" (143.7cm)
Volume - 33.8 gallons (154.4L)
Boat Size - 60' - 70' (18.3 - 21.3M)
Weight - 19.95lbs
*Sold as an Individual
|
499.72 |
|
|
F-10 Twin Eye Fender 18" x 50" - Black
Polyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.
The F Series fender has offered protection to the world's finest yachts and fishing vessels. Why? Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice!
Classic European twin-eye style boat fenders for the most discerning eye.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 18" x 50" (45.7 x 127cm)
Eye Diameter - 1" (2.54cm)
Circumference - 56.6" (143.7cm)
Volume - 33.8 gallons (154.4L)
Boat Size - 60' - 70' (18.3 - 21.3M)
Weight - 19.95lbs
*Sold as an Individual
|
499.72 |
|
|
Speaker Spacer for FUSION FR7022 - 7" Speakers - .50" - White
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .50"
Edge - 1/16" Round
Outer Diameter - 7.69" or 195 mm
Bolt Hole Diameter - 6.75" or 171 mm
Mounting Hole Diameter - 6.13" or 156 mm
Compatible With:
MS-FR7022
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
29.26 |
|
|
Speaker Spacer for FUSION FR7022 - 7" Speakers - .50" - Black
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .50"
Edge - 1/16" Round
Outer Diameter - 7.69" or 195 mm
Bolt Hole Diameter - 6.75" or 171 mm
Mounting Hole Diameter - 6.13" or 156 mm
Compatible With:
MS-FR7022
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
29.26 |
|
|
Speaker Spacer for FUSION SG-FL772 - 7.7" Speakers - .50" - Black
Don't have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer.
Specifications:
Thickness - .50"
Edge - 1/16" Round
Outer Diameter - 7.75" or 197 mm
Bolt Hole Diameter - 6.94" or 176 mm
Mounting Hole Diameter - 6.14" or 156 mm
Compatible With:
SG-F772SPW, SG-FL772SPC and SG-CL77SPC
*Sold as a Pair
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
29.26 |
|