TM260-9N Transom Mount Transducer 1kW 50/200kHz 9-Pin for Navico TM260 takes the legendary performance of the B260 to your vessel’s transom. This top-of-the-line 1kW transom-mount brings crystal clear imaging to any of today’s fishfinders. The large 200 kHz element and the seven-element 50 kHz array are excellent for bait and game fish separation along with detecting ground fish holding tight to the bottom. The TM260’s high-performance mounting bracket is easy-to-install and has a streamlined shape that delivers high-speed performance up to 30 knots (35 MPH). Fishing Applications: Blue-water trolling using 50 kHz Deep-water bottom and wreck fishing up to 800 m (2,625’)  Features: Top-of-the-line narrow-beam transom-mount  Designed for bottom fishing Wide 19° beam at 50 kHz Narrow 6° beam at 200 kHz Interfaces to any 600 W or 1 kW sounder The depth and fast-response water-temperature sensor Kick-up assembly locks in the “up” position and will not damage the transom Accommodates transom angles between 3° and 21° Urethane housing Boat Size: Up to 12 m (40’) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Transom Mount Depth/Temp 50/200kHz - 8-Pin This plastic transom mount can be used to replace the dual frequency transducers included with many Garmin units. The 500 W 8-pin transducer has a maximum depth of 1,500 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 40 to 10 degrees; and mounts on a 0 to 70 degree transom. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

TM265LH Plastic Transom Mount Transducer w/Depth & Temp - 12-Pin Garmin's plastic transom mount performs well in deep water and provides exceptional bottom and water column detail. The best performing 1 kW transom mount, this transducer has a maximum depth of 3,000 feet; an operating frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25 degrees or 6 to 10 degrees; and mounts on a 3 to 21 degree transom. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. Compatible Devices: GPSMAP® 7607xsv, 7608xsv, 7610xsv, 7612xsv, 7616xsv GSD™ 25 Premium Sonar Module WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GO9 XSE Combo with Transom Mount Transducer 83/200 kHz This kit combines Simrad’s GO9 XSE Chartplotter/Fishfinder with Navico’s 9-Pin High-Speed Skimmer Transducer. Simrad GO9 XSE Chartplotter/Fishfinder with C-MAP Discover Chart  GO9 XSE Multi-function display with built-in Echosounder, GPS, and Wi-Fi. Super-bright, 9" multi-touch widescreen display with NMEA 2000 and radar interface.  Features: Easy to use, High brightness 9" tablet-style touchscreen Built-in advanced echosounder capable of displaying CHIRP, Forwardscan, Sidescan, and Downscan images Radar port for connection to a Simrad solid-state radar Direct Audio, Autopilot, communication, and engine connection and control over NMEA2000 Built-in WiFi for mobile device mirroring and internet downloads of charting and software Easy-to-use multi-touch software Safely and easily navigate using your favorite cartography (Insight, Navionics, CMAP) Determine depth, and bottom type and find fish using one of the many echosounder technology options Quick and simple control of entertainment systems connected to NMEA2000 Vessel circuit control when connected to a C-zone digital switching system View and monitor engine data while underway Low Profile Glass dash styling Super bright widescreen display Built-in Wi-Fi connectivity Software update notifications and downloads when connected to the internet Screen mirroring when connected to a mobile device Built-in 10 Hz GPS antenna Dual Micro SD card slot Built-in echosounder (Broadband & Chirp) (transducer required) Built-in DownScan and Sidescan Imaging (transducer required) Built-in Forwardscan Imaging (transducer required) Radar port for direct connection to Simrad 3G/4G or Halo Radar scanners Operable with OP40/OP50 Remote Advanced NMEA2000 networking Easy-to-Use Multi-Touch Display The GO9 XSE offers true ease of use with intuitive touchscreen controls that smartphone and tablet users will find instantly familiar. Tap to create or select waypoints, pinch to zoom, or tap and drag to pan smoothly across charts. Simple home screen and menu layouts make all functions quickly accessible, with large and clearly-captioned icons that are easy to recognize and tap. Chartplotter Navigation & Waypoint Management The GO9 XSE is a full-featured chartplotter, with support for the widest available range of cartography options including C-MAP® MAX-N+, Navionics®, Insight®, Insight Genesis®, and NV Digital® Charts. Navigate confidently to destinations near and far, with the flexibility to choose charts that best fit your needs and location. Set and record those destinations easily with simple waypoint management: mark waypoints with a touch, and assign meaningful names that make it easy to look up your desired destination whether you've mapped out ten places or a thousand. Expand Your View with a Simrad Radar Solution The Simrad GO9 XSE is a full-featured radar display with plug-and-play connectivity to Simrad Broadband 3G, Broadband 4G, and Halo Pulse Compression radar systems. Cruise confidently through crowded harbors, navigate safely in poor visibility, keep an eye on distant weather cells, and find flocks of feeding birds that hint at good fishing spots. Automatic tuning helps to provide a clear radar picture in any conditions, while radar overlay combines radar data with navigational charts for an easy-to-interpret view of your surroundings. Fully Customisable Interface The Simrad GO9 XSE is fully customizable to suit your vessel and your favorite on-water activities from power boating, to fishing, to water sports. Customize your home screen with shortcuts to the features you use most, and personalize it with your choice of wallpaper. Adjustable split-screen views and customizable panel layouts let you see everything you need on-screen at once, whatever your activity. Plan Smarter with TripIntel™ Technology Designed for power boaters, TripIntel technology tracks and displays the key information you need to plan safe and enjoyable days on the water. Make smart decisions with fuel range overlaid on charts, easy access to current and future tide levels, and a detailed history of your previous trips including the route you took and how your boat performed. Built-in 10 Hz GPS receiver* With a high-speed GPS receiver updating your position ten times every second, the Simrad GO9 XSE is ideal for use aboard fast-moving RIBs and powerboats. Watch your boat's movement tracked smoothly, accurately, and in real-time, without 'jumping' from point to point on the display. Cruise Charting View Designed with power boating in mind, the Simrad GO9 XSE offers a unique Cruise Charting page that brings together crucial navigation data and charts in one easily readable display. Choose the information most relevant to your cruising style and on-water activities with the ability to edit on-screen data items. NMEA 2000® Engine Monitoring & Instrumentation The Simrad GO9 XSE connects to any NMEA 2000®-capable equipment aboard your vessel including outboard and inboard engines; fuel level and flow meters; speed, heading, and water temperature sensors; and much more. Create your own custom digital instrument displays, bringing a wealth of information to even the most crowded dash while keeping a clean look with as few gauges as possible. Watch Your Depth with Built-in Sonar Knowing the true depth beneath your hull can help you enjoy your time on the water with fewer worries, and makes it easier to locate suitable anchorages in unfamiliar waters. With built-in sonar, just add a suitable sonar transducer for accurate, real-time depth tracking. A scrollable depth history view lets you track back and easily set waypoints for promising anchorages, while StructureScan Imaging combines DownScan and SideScan sonar to offer a picture-like view of the bottom beneath your vessel. Cruise Confidently with ForwardScan Sonar Using an optional ForwardScan transducer, this forward-looking sonar technology provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water. Find fish with CHIRP & StructureScan® HD sidescan imaging Whether fishing is your life or just a casual hobby, any fishing trip will benefit from the extensive array of built-in sonar technology on the Simrad GO9 XSE. Add a suitable transducer, available separately or bundled with your display, and the GO9 XSE works as a powerful fishfinder with CHIRP-enabled broadband sonar for clear detection of fish throughout the water column. With an optional HDI or Active Imaging 3-in-1,  the GO9 XSE also offers StructureScan HD sidescan imaging for a picture-like view of the fish-holding structure beneath and around your boat. Simrad SonicHub®2 & Bluetooth® Audio Integration If you're not at home on the water without a good soundtrack, the Simrad SonicHub®2 marine audio system is the perfect companion to a GO9 XSE display. Stream music from Bluetooth® connected tablets, smartphones, and other mobile devices, play MP3 files from a USB flash drive or listen to the SonicHub 2's built-in AM/FM radio. SonicHub 2 brings complete control of your audio entertainment to your GO9 XSE display, eliminating the need for a separate stereo head unit and letting you listen to your music, your way. GoFree™ cloud enabled with Built-in Wi-Fi With Wi-Fi built-in, the Simrad GO9 XSE provides direct access to GoFree cloud services including easy wireless map downloads, software updates, and more. Whether hooked up to your home Wi-Fi with your boat trailered in the driveway, logged in to your marina's Wi-Fi, or tethered to your smartphone out on the lake, you can access GoFree cloud services anywhere you have an internet connection. On the water, GoFree connects the Simrad GO9 XSE to your mobile devices, mirroring your display's screen on your smartphone or giving you full remote control from your tablet with the free GoFree Controller app. SiriusXM Weather Integration The Simrad GO9 XSE is the only GO Series display compatible with SiriusXM Marine satellite weather, via the optional WM-4 expansion module, for real-time access to weather information right on your display. With onboard access to weather radar, surface buoy reports, NOAA Marine Zone forecasts, and more, you can check out the conditions offshore before you even leave the dock. SiriusXM Marine is a subscription service, exclusively available within North America. * Built-in GPS receiver works in any bracket-mount installation, and when flush-mounted with most fiberglass hulls. When flush-mounted in a metal hulled vessel, an external GPS receiver such as the Simrad GS25 may be required. Specifications: Casing: PC/ABS Operating temp: -15°C to +55°C (+5°F to +131°F) Water ingress: IPX6 and 7 Weight (excluding mounting hardware): 1.315 kg (2.9 lbs) - GO9 XSE Screen brightness: 1200 nits Screen resolution: 480 x 800 (H x W) Viewing angle in degrees (typical value at contrast ratio = 10): L/R: 70, top: 50, bottom: 60 Operating voltage: 10 - 17 V DC Current draw at 13.6 V (sonar off, max B/L): 1 A Low power standby mode: yes Protection: reverse polarity and temporary over-voltage to 36 V Alarm output current: 1 A max Processor: iMX61 single core Conformity: CE, C-Tick NMEA 2000 (compliant):1 port (Micro-C male) -, network load 1 LEN: 1 combined port Power and NMEA 2000 (7 pin connector) Sonar 1 port (9-pin connector) Radar 1 port (5-pin Ethernet connector) Card reader: Dual microSD Comes With: 000-13702-001 - Gimbal bracket, GO9,V9 000-13700-001 - GO9 / V9 Bezel Replacement 000-13699-001 - GO9/V9 Dash mount kit 000-00128-001 - Power Cable 000-13698-001 - GO9 XSE Suncover C-MAP Discover Chart Features Full-Featured Vector Charts Custom Depth Shading High-Resolution Bathymetry Easy-Routing Tides & Currents Navico 9-Pin High-Speed Skimmer Transducer 83/200 kHz 9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector. Features: Transom Transducer High-Speed Skimmer 83/200kHz with Temp 9-Pin Connector

GO9 XSE Combo with Transom Mount Transducer 83/200 kHz & HALO20 Package This kit combines Simrad’s GO9 XSE with Navico’s 9-Pin High-Speed Skimmer Transducer and Simrad’s HALO20 20" Radar Dome. Simrad GO9 XSE Chartplotter/Fishfinder w/C-MAP Discover Chart GO9 XSE Multi-function display with built-in Echosounder, GPS, and Wi-Fi. Super-bright, 9" multi-touch widescreen display with NMEA 2000 and radar interface.  Features: Easy to use, High brightness 9" tablet-style touchscreen Built-in advanced echosounder capable of displaying CHIRP, Forwardscan, Sidescan, and Downscan images Radar port for connection to a Simrad solid-state radar Direct Audio, Autopilot, communication, and engine connection and control over NMEA2000 Built-in WiFi for mobile device mirroring and internet downloads of charting and software Easy-to-use multi-touch software Safely and easily navigate using your favorite cartography (Insight, Navionics, CMAP) Determine depth, and bottom type and find fish using one of the many echosounder technology options Quick and simple control of entertainment systems connected to NMEA2000 Vessel circuit control when connected to a C-zone digital switching system View and monitor engine data while underway Low Profile Glass dash styling Super bright widescreen display Built-in Wi-Fi connectivity Software update notifications and downloads when connected to the internet Screen mirroring when connected to a mobile device Built-in 10 Hz GPS antenna Dual Micro SD card slot Built-in echosounder (Broadband & Chirp) (transducer required) Built-in DownScan and Sidescan Imaging (transducer required) Built-in Forwardscan Imaging (transducer required) Radar port for direct connection to Simrad 3G/4G or Halo Radar scanners Operable with OP40/OP50 Remote Advanced NMEA2000 networking Easy-to-Use Multi-Touch Display The GO9 XSE offers true ease of use with intuitive touchscreen controls that smartphone and tablet users will find instantly familiar. Tap to create or select waypoints, pinch to zoom, or tap and drag to pan smoothly across charts. Simple home screen and menu layouts make all functions quickly accessible, with large and clearly-captioned icons that are easy to recognize and tap. Chartplotter Navigation & Waypoint Management The GO9 XSE is a full-featured chartplotter, with support for the widest available range of cartography options including C-MAP® MAX-N+, Navionics®, Insight®, Insight Genesis®, and NV Digital® Charts. Navigate confidently to destinations near and far, with the flexibility to choose charts that best fit your needs and location. Set and record those destinations easily with simple waypoint management: mark waypoints with a touch, and assign meaningful names that make it easy to look up your desired destination whether you've mapped out ten places or a thousand. Expand Your View with a Simrad Radar Solution The Simrad GO9 XSE is a full-featured radar display with plug-and-play connectivity to Simrad Broadband 3G, Broadband 4G, and Halo Pulse Compression radar systems. Cruise confidently through crowded harbors, navigate safely in poor visibility, keep an eye on distant weather cells, and find flocks of feeding birds that hint at good fishing spots. Automatic tuning helps to provide a clear radar picture in any conditions, while radar overlay combines radar data with navigational charts for an easy-to-interpret view of your surroundings. Fully Customisable Interface The Simrad GO9 XSE is fully customizable to suit your vessel and your favorite on-water activities from power boating, to fishing, to water sports. Customize your home screen with shortcuts to the features you use most, and personalize it with your choice of wallpaper. Adjustable split-screen views and customizable panel layouts let you see everything you need on-screen at once, whatever your activity. Plan Smarter with TripIntel™ Technology Designed for power boaters, TripIntel technology tracks and displays the key information you need to plan safe and enjoyable days on the water. Make smart decisions with fuel range overlaid on charts, easy access to current and future tide levels, and a detailed history of your previous trips including the route you took and how your boat performed. Built-in 10 Hz GPS receiver* With a high-speed GPS receiver updating your position ten times every second, the Simrad GO9 XSE is ideal for use aboard fast-moving RIBs and powerboats. Watch your boat's movement tracked smoothly, accurately, and in real-time, without 'jumping' from point to point on the display. Cruise Charting View Designed with power boating in mind, the Simrad GO9 XSE offers a unique Cruise Charting page that brings together crucial navigation data and charts in one easily readable display. Choose the information most relevant to your cruising style and on-water activities with the ability to edit on-screen data items. NMEA 2000® Engine Monitoring & Instrumentation The Simrad GO9 XSE connects to any NMEA 2000®-capable equipment aboard your vessel including outboard and inboard engines; fuel level and flow meters; speed, heading, and water temperature sensors; and much more. Create your custom digital instrument displays, bringing a wealth of information to even the most crowded dash while keeping a clean look with as few gauges as possible. Watch Your Depth with Built-in Sonar Knowing the true depth beneath your hull can help you enjoy your time on the water with fewer worries, and makes it easier to locate suitable anchorages in unfamiliar waters. With built-in sonar, just add a suitable sonar transducer for accurate, real-time depth tracking. A scrollable depth history view lets you track back and easily set waypoints for promising anchorages, while StructureScan Imaging combines DownScan and SideScan sonar to offer a picture-like view of the bottom beneath your vessel. Cruise Confidently with ForwardScan Sonar Using an optional ForwardScan transducer, this forward-looking sonar technology provides a clear two-dimensional image of the bottom in front of your vessel, allowing you to navigate shallow or poorly charted waters with confidence. With real-time updates and a forward-looking view of up to eight times your current depth, ForwardScan lets you relax and enjoy a safer day on the water. Find fish with CHIRP & StructureScan® HD sidescan imaging Whether fishing is your life or just a casual hobby, any fishing trip will benefit from the extensive array of built-in sonar technology on the Simrad GO9 XSE. Add a suitable transducer, available separately or bundled with your display, and the GO9 XSE works as a powerful fishfinder with CHIRP-enabled broadband sonar for clear detection of fish throughout the water column. With an optional HDI or Active Imaging 3-in-1,  the GO9 XSE also offers StructureScan HD sidescan imaging for a picture-like view of the fish-holding structure beneath and around your boat. Simrad SonicHub®2 & Bluetooth® Audio Integration If you're not at home on the water without a good soundtrack, the Simrad SonicHub®2 marine audio system is the perfect companion to a GO9 XSE display. Stream music from Bluetooth® connected tablets, smartphones, and other mobile devices, play MP3 files from a USB flash drive or listen to the SonicHub 2's built-in AM/FM radio. SonicHub 2 brings complete control of your audio entertainment to your GO9 XSE display, eliminating the need for a separate stereo head unit and letting you listen to your music, your way. GoFree™ cloud enabled with Built-in Wi-Fi With Wi-Fi built-in, the Simrad GO9 XSE provides direct access to GoFree cloud services including easy wireless map downloads, software updates, and more. Whether hooked up to your home Wi-Fi with your boat trailered in the driveway, logged in to your marina's Wi-Fi, or tethered to your smartphone out on the lake, you can access GoFree cloud services anywhere you have an internet connection. On the water, GoFree connects the Simrad GO9 XSE to your mobile devices, mirroring your display's screen on your smartphone or giving you full remote control from your tablet with the free GoFree Controller app. SiriusXM Weather Integration The Simrad GO9 XSE is the only GO Series display compatible with SiriusXM Marine satellite weather, via the optional WM-4 expansion module, for real-time access to weather information right on your display. With onboard access to weather radar, surface buoy reports, NOAA Marine Zone forecasts, and more, you can check out the conditions offshore before you even leave the dock. SiriusXM Marine is a subscription service, exclusively available within North America. * Built-in GPS receiver works in any bracket-mount installation, and when flush-mounted with most fiberglass hulls. When flush-mounted in a metal hulled vessel, an external GPS receiver such as the Simrad GS25 may be required. Specifications: Casing: PC/ABS Operating temp: -15°C to +55°C (+5°F to +131°F) Water ingress: IPX6 and 7 Weight (excluding mounting hardware): 1.315 kg (2.9 lbs) - GO9 XSE Screen brightness: 1200 nits Screen resolution: 480 x 800 (H x W) Viewing angle in degrees (typical value at contrast ratio = 10): L/R: 70, top: 50, bottom: 60 Operating voltage: 10 - 17 V DC Current draw at 13.6 V (sonar off, max B/L): 1 A Low power standby mode: yes Protection: reverse polarity and temporary over-voltage to 36 V Alarm output current: 1 A max Processor: iMX61 single core Conformity: CE, C-Tick NMEA 2000 (compliant):1 port (Micro-C male) -, network load 1 LEN: 1 combined port Power and NMEA 2000 (7 pin connector) Sonar 1 port (9-pin connector) Radar 1 port (5-pin Ethernet connector) Card reader: Dual microSD Comes With: 000-13702-001 - Gimbal bracket, GO9,V9 000-13700-001 - GO9 / V9 Bezel Replacement 000-13699-001 - GO9/V9 Dash mount kit 000-00128-001 - Power Cable 000-13698-001 - GO9 XSE Suncover C-MAP Discover Chart Features Full-Featured Vector Charts Custom Depth Shading High-Resolution Bathymetry Easy-Routing Tides & Currents Navico 9-Pin High-Speed Skimmer Transducer 83/200 kHz 9-Pin High-Speed Skimmer M/H PK ASY: 83/200 kHz transom-mount skimmer depth/temp - Black 9-pin connector. Features: Transom Transducer High-Speed Skimmer 83/200kHz with Temp 9-Pin Connector Simrad HALO20 20" Radar Dome with 10M Cable Unrivalled Short-To-Mid-Range Performance Extend your view from the bow of your boat out to 24 nautical miles with pulse-compression radar technology that not only delivers a powerful mix of short and long-range detection but provides precise target definition with minimal clutter. Better Situational Awareness, Collision Avoidance HALO20 radar delivers a comprehensive range of features to enhance your situational awareness and on-water safety. Monitor selected collision hazards with MARPA target tracking, tracking up to 10 targets, or 20 in dual range. Whether you’re navigating through crowded waterways or contending with poor visibility, HALO20 radar cuts through the clutter to give you a clear and current picture of your surroundings. Ready Instantly HALO20 Radar wakes instantly from its low-power standby mode, delivering radar coverage exactly when and where you want it. Even if your HALO20 radar is completely powered down start-up is a matter of seconds, not minutes like traditional pulse radar. Easy to Use Harbor, offshore, weather, and custom modes tune HALO20 Radar’s advanced signal processing to help ensure that targets can be seen vividly – even in the toughest environmental conditions. Features: 10W Pulse Compression 24 nm range from a compact 20-inch dome Unrivalled short range Radiation safe Easy operation with harbor, offshore, and weather mode MARPA target tracking InstantOn™ Low Power Consumption Guard Zones Included: 20" dome 10m cable (000-14548-001) Ethernet Adapter Cable (000-14552-001)

xSonic P66 Plastic Transom Mount Transducer 50/200kHz with Black 9-Pin Connector P66 Transom Mount Depth/Temp Transducer The P66 features a 50/200 kHz, dual-frequency, single-ceramic element. This hydrodynamic housing with a rounded nose reduces the turbulence under the transducer's face for clear display images.

TM265C-LH Transom Mount CHIRP - 1kW Transducer Transom-mounted 1kW dual-band CHIRP fishfinder transducer. The TM265 is available in the Low/Medium and Low/High bands. A Low/High widebeam model exists with the designation TM275. Specifications: Low/High Bands 1000 Watts Transom Mount Housing: Urethane Requires Mix and Match Cable for the Sounder its going into This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B60 Thru-Hull Transducer 20° Tilt 9-Pin for Navico xSonic The B60 is a 600W, 50/200 kHz transducer that integrates Airmar’s popular, Tilted Element™ feature. This Tilted Element transducer has the ceramic element fixed at a 20° angle within the housing. When the transducer is installed almost flush with the hull, the tilt of the element corrects for the hull deadrise angle. Orienting the beam directly down ensures maximum echo returns to the transducer for more accurate depth readings. Features: Depth and fast-response water temperature sensing 600 W of power Dual-frequency element: 50 kHz with a wide 45° beamwidth for depth performance to 353 m (1200') 200 kHz with a 12° beamwidth for depth performance to 206 m (700') Perfect for center-console or trailered boats Low-profile bronze housing extends only 5 mm (3/16") outside the hull No effect on your boat’s running performance Bronze housing for fiberglass or wood hull Also available in a stainless steel housing (SS60) for use with all hull materials Specifications: Power Rating: 600 W Max Deadrise Angle: 24° Housing: Bronze Functions: Depth, Temperature Hull Material: Fiberglass or wood Max Vessel LOA: Up to 8 m (26') Hole Size: 60 mm (2-3/8") Usable Shaft Length: 68.5 mm (2.70") Acoustic Window: Urethane Common Use: Leisure/Yachting, Fishing Conventional Beam: 45°/12° Max Deadrise: Up to 24° Max Depth: Low frequency- 366 m (1200'), High frequency- 206 m (700') Mounting Style: Tilted Element Thru-Hull Retractable housing: No Single or Dual Frequency: Conventional Dual Frequency Tilted Element: Yes Weight: 1.4 kg (3 lbs.) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Axiom 7 DV MFD with CPT-100DVS Transom Mount Transducer & LightHouse North America Chart The Axiom™ is a powerful multifunction navigation system from Raymarine. The Axiom 7 DV features a 7-inch rugged all-glass touchscreen display and is powered by Raymarine's powerful LightHouse 3 operating system and a supercharged quad-core processor. Axiom 7 DV has a built-in dual-channel CHIRP DownVision sonar for imaging bottom structure and fish. A deluxe CPT-100DVS transom mount CHIRP DownVision transducer is included. Axiom 7 DV is expandable so its capabilities can grow as needed. It supports the full range of Raymarine accessories including Quantum radar, CHIRP Sonar, FLIR thermal cameras, audio integration, instruments, cameras, and Evolution autopilot. Standard Wi-Fi and Bluetooth connectivity allow connection to the latest Raymarine apps for tablets and smartphones. The Axiom 7 DV includes a CPT-100DVS transom mount transducer, surface and trunnion mounting kits, mounting hardware, power/data cable, LightHouse North America Chart, and installation instructions. Features: Rugged, All-Glass touch screen display delivers a big-screen experience in a small footprint. Optically bonded for brighter colors, sharper contrast, and sunlight visibility. LightHouse 3 OS is fast, fluid, and easy to learn. An uncluttered interface that is easily personalized for your style of navigating. Wide Spectrum CHIRP sonar transmits on 60 different frequencies for the most life-like sonar imagery and simply the best fish targeting- hands down! Deluxe CPT-100 DVS Transom Mount Transducer Included for CHIRP DownVision and fish targeting. Fast 10 Hz 72 Channel GPS/GLONASS Receiver for rapid position and heading updates and smooth on-screen tracking. Support for the best charts from Navionics and LightHouse Raster and Vector Charts sourced from leading map makers like NV Digital, Blue Latitude, and more. Navigate Safely at Night with the optional FLIR M100 and M200 compact marine thermal cameras. Quantum CHIRP Radar Ready - Superior solid state CHIRP radar delivers no-compromise performance on long and extremely short ranges. Marine Audio Control - Turn up the volume and control NMEA2000 compatible marine audio systems like Rockford Fosgate. Ready to Network with Raynet Ethernet and NMEA2000. Connect multiple Axiom displays or expand with Quantum, HD radar, IP cameras, engine gauges, autopilots, instruments, and more. Built-in Wi-Fi lets you stream and control Axiom right from your smartphone or tablet. You can also sync Axiom's waypoints, routes, and charts with Navionics mobile apps. CPT-100DVS Transom Mount CHIRP DownVision™ Transducer: Installation: Transom Mount Material: Urethane Max Depth (Ft): DV=600 | FF=900 Frequency (kHz): CHIRP DownVision | CHIRP DownVision / Fishfinder Beam Width (L/H)25°/60° Records: Depth / Temperature Approved Hull Material: Fibreglass / Wood / Metal Cable Length (Ft/M):33'/10M Deadrise: 0-90° Transom

Bullet Skimmer Transom Mount Transducer Wide Angle 200khz Transom Mount Transducer for the HOOK2 4x Series Fishfinders. Max Depth: 500ft

Element™ 12 HV Combo with Lighthouse North America Chart & HV-100 Transom Mount Transducer Knowledge is power—and the Element™ CHIRP sonar/GPS series from Raymarine gives you the power to make smarter decisions on the water. Built for anglers that want to be one step ahead of the game, Element delivers the sharpest view of the underwater world with HyperVision™ 1.2 megahertz super high-resolution sonar technology. HyperVision technology takes DownVision, SideVision, and Raymarine RealVison 3D sonar to the next level of precision imaging and fish identification, letting you see structures, vegetation, and fish with photo-like clarity.  And the power of Element doesn’t stop there—an onboard quad-core processor delivers instantaneous chart redraw, fast response, and smooth RealVision 3D imaging. To keep you on target, Element features simple keypad controls and an angler-centric user interface so you can focus on the fish—not the helm.  An oversized waypoint key puts you on your favorite spots, and Element’s RealBathy™ personal depth map generator lets you make your own high definition bathymetric maps on the fly. Features: High-visibility sunlight viewable 12” display Superior HyperVision CHIRP sonar technology achieves 3x the clarity of conventional side and down imaging sonars  Built-in RealVision 3D sonar gives you the power to accurately identify the location of ledges, channel beds, and other contour changes Fast quad-core processor allows instantaneous chart re-draw and continuous 3D rending while running a simple, easy-to-learn user interface. 1.2 megahertz HyperVision sonar provides outstanding resolution up to 100’ while 350kHz Down and SideVision delivers photo-like imaging up to 600’ Take 3D sonar to the next level with HyperVision mode for unprecedented resolution and positional awareness Dedicated keypad controls for simple operation, plus an oversized waypoint key for marking favorite spots Raymarine RealBathy™ personal sonar mapping and Navionics SonarCharts Live support  User-programmable keys allow quick access to most-used configurations Comes with Raymarine LightHouse North America Chart Supports Navionics, C-MAP and other regional charting options NMEA2000 networking for VHF, engine, tanks, and heading sensor integration

RealVision 3D™ All-In-One Transom Mount Transducer Raymarine’s RV-100 All-In-One Transom Mount Transducer lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D sonar. The RV-100 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells and while maneuvering. The RV-100 also has a built-in fast response water temperature sensor for quick, accurate readings. The RV-100 is designed for easy transom mounting on outboard-powered motor boats. It features a rugged, marine-grade stainless steel mounting bracket with integrated kick-up to prevent damage in the event of a strike with floating debris, rocks, or stumps. The RV-100 can also be removed from the transom bracket and attached to the stainless Jack-Plate mounting bracket (sold separately) which is ideal for bass boats, flats boats and skiffs. The RV-100 can also be mounted onto stepped hull vessels using the optional stainless steel step-mounting bracket (sold separately) What’s in the Box? RV-100 All-In-One Transom Mount Transducer with 8-meter (26-foot) cable Transom bracket Mounting hardware Installation instructions

TM260 1kW Transom Mount Transducer w/Humminbird #9 Plug - 7-Pin Powerful, Yet Sensitive! The TM260 takes the legendary performance of the B260 to your vessel's transom. This top-of-the-line, broadband, transom-mount brings crystal clear imaging to any of today's fishfinders. The large, 200 kHz element and the seven-element, 50 kHz array are excellent for bait and game fish separation along with detecting ground fish holding tight to the bottom. The TM260's rugged mounting bracket is easy-to-install and has a streamlined shape that delivers high-speed performance up to 30 knots (35 MPH). Features: Top-of-the-line narrow-beam transom-mount Designed for bottom fishing Wide 19° beam at 50 kHz Narrow 6° beam at 200 kHz Interfaces to any 600W or 1 kW sounder Depth and fast-response water-temperature sensor Kick-up assembly locks in the "up" position and will not damage the transom Accommodates transom angles between 3° and 21° Urethane housing Boat Size: Up to 12M (40') Specifications: Weight: 4 kg (8.9 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

TM260 1kW Transom Mount Transducer w/Humminbird 14-Pin Plug Powerful, Yet Sensitive! The TM260 takes the legendary performance of the B260 to your vessel's transom. This top-of-the-line, broadband, transom-mount brings crystal clear imaging to any of today's fishfinders. The large, 200 kHz element and the seven-element, 50 kHz array are excellent for bait and game fish separation along with detecting ground fish holding tight to the bottom. The TM260's rugged mounting bracket is easy-to-install and has a streamlined shape that delivers high-speed performance up to 30 knots (35 MPH). Features: Top-of-the-line narrow-beam transom-mount Designed for bottom fishing Wide 19° beam at 50 kHz Narrow 6° beam at 200 kHz Interfaces to any 600W or 1 kW sounder Depth and fast-response water-temperature sensor Kick-up assembly locks in the "up" position and will not damage the transom Accommodates transom angles between 3° and 21° Urethane housing Boat Size: Up to 12M (40') Specifications: Weight: 4 kg (8.9 lb) Hull Deadrise: Up to 28° Acoustic Window: Urethane This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

TM275C-LHW 1kW Chirp Transom Mount Transducer Get more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer options. The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 500'. The low frequency band and 1 kW of power also provides great deeper water performance. Get the best of both worlds with Airmar’s dual frequency Chirp-ready transducers with wide beam coverage. Features: Depth and fast-response water-temperature sensor 1 kW for great deep water performance from the low frequency Low Frequency: 42 kHz to 65 kHz with maximum depth of 914 m (3000') 25° to 16° beamwidth High Frequency: 150 kHz to 250 kHz with maximum depth of 152 m (500') 25° constant beamwidth 123 kHz of total bandwidth from one transducer Covers popular fishing frequencies of 50 and 200 kHz plus everything else in the bandwidth High frequency provides superior shallow water performance, bottom detail and fish target separation High wide beamwidth provides more coverage under the boat for detecting fish in the upper water column Transom-mount transducer with stainless steel mounting bracket Recommended boat size: up to 10 m (32') Hull Type: Fiberglass, wood, aluminum or steel Exclusive Xducer ID® technology Mix and Match Cable Required Specifications: Weight: 4 kg (8.9 lb) Transom Angles: 3° to 21° Acoustic Window: Urethane Urethane transducer housing with stainless steel bracket Eight internal broadband ceramic assemblies This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.