|
GP2080-13 SystemPod Pre-Cut for Simrad NSS9 evo2 or B&G Zeus² 9 & 2 Instruments for 12" Wide Guard
GP2080 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Sizing:
Overall Size: 11.5"H x 19.75"W x 6.5"D
Usable Face: 9.5"H x 17"W x 5.5"D
Max Cutout: 9.375"H x 17"W
Instrument Cutout: 3.6"
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
462.53 |
|
|
GP2050-13 SailPod Pre-Cut for Simrad NSS9 evo2 or B&G Zeus² 9 for 12" Wide Guard
GP2050 Series for 12" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.
SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.
Sizing:
Overall Size: 10.875"H x 15.125"W x 6.75"D
Usable Face: 8.75"H x 12.75"W x 5"D
Max Cutout: 8.375"H x 12.375"W
All SailPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners and wrench
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
|
392.71 |
|
|
GP1040-13 SystemPod Pre-Cut for Simrad NSS9 evo2 or B&G Zeus² 9 & 1 Instrument for 9.5" Wide Guard
NavPod GP1040 Series for 9.5" Guard SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Sizing:
Overall Size: 9.5"H x 20.75"W x 6"D
Usable Face: 7.375"H x 17.5"W x 5"D
Max Cutout: 7"H x 17"W
Instrument Cutout: 3.6"
All SystemPods include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-proof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
401.44 |
|
|
GP1080-13 SystemPod Pre-Cut for Simrad NSS9 evo2 or B&G Zeus² & 2 Instruments for 9.5" Wide Guard
GP1080 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Sizing:
Overall Size: 11.5"H x 19.75"W x 6.5"D
Usable Face: 9.5"H x 17"W x 5.5"D
Max Cutout: 9.375"H x 17"W
Instrument Cutout: 3.6"
All SystemPods include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-proof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
462.53 |
|
|
GP2040-13 SystemPod Pre-Cut for Simrad NSS9 evo2 or B&G Zeus² & 1 Instrument for 12" Wide Guard
NavPod GP2040 Series - SystemPods for 12" Guards are for mounting one Raymarine C90W or E90W with two 3.6" holes for addtional marine electronics, all in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Sizing:
Overall Size: 9.5"H x 20.25"W x 6"D
Usable Face: 7.375"H x 17.5"W x 5"D
Max Cutout: 7"H x 17"W
Instrument Cutout: 3.6"
All SailPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
401.44 |
|
|
GP1606 SystemPod Pre-Cut for Simrad NSS7 evo2 or B&G Zeus² 7 & 2 Instruments for 9.5" Wide Guard
GP1600 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Usable Face: 20"W x 6.25"H
Instrument Cutout: 3.6"
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
410.17 |
|
|
GP2606 SystemPod Pre-Cut for Simrad NSS7 evo2 or B&G Zeus² 7 & 2 Instruments for 12" Wide Guard
GP2600 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Sizing:
Usable Face: 20"W x 6.25"H
Instrument Cutout: 3.6"
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
410.17 |
|
|
GP1516 SystemPod Pre-Cut for Simrad NSS7 evo2 or B&G Zeus² 7 & 1 Instrument for 9.5" Wide Guard
GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Instrument Cutout: 3.6"
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
331.62 |
|
|
GP1506 SystemPod Pre-Cut for Simrad NSS7 evo2 or B&G Zeus² 7 with Space On The Left for 9.5" Wide Guard
GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
331.62 |
|
|
GP2506 SystemPod Pre-Cut for Simrad NSS7 evo2 or B&G Zeus² 7 with space on left for 12" Wide Guard
GP2500 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Sizing:
Usable Face: 15.05"W x 6.25"H
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
331.62 |
|
|
GP2515 SystemPod Pre-Cut for Simrad NSS7 evo2 or B&G Zeus² 7 & 1 Instrument for 12" Wide Guard
GP2500 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Sizing:
Usable Face: 15.05"W x 6.25"H
Instrument Cutout: 3.6"
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
331.62 |
|
|
GP1176 SystemPod Pre-Cut for Simrad NSS12 evo2 or B&G Zeus² 12 & 2 Instruments for 9.5" Wide Guard
NavPod GP1170 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Sizing:
Overall Size: 11.750"H x 23.25"W x 6.75"D
Usable Face: 9.9"H x 20.5"W x 5.375"D
Max Cutout: 9.125"H x 20"W
Instrument Cutout: 3.6"
All SystemPods include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-proof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
462.53 |
|
|
GP2176 SystemPod Pre-Cut for Simrad NSS12 evo2 or B&G Zeus² 12 & 2 Instruments for 12" Wide Guard
NavPod GP2176 Series for 12" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
462.53 |
|
|
PP4406 PowerPod Pre-Cut f/Simrad NSS7 evo2 or B&G Zeus2 7 - Carbon Black
PP4400 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base.
The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV.
PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.
Sizing:
Overall Size: 9"H x 10.2"W x 6"D
Usable Face: 5.6"H x 8.9"W x 3.75"D
Max Cutout: 4.625"H x 8"W
All PowerPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Swivel Base with large pass-through for wire harness
|
322.90 |
|
|
GP1202 SailPod Pre-Cut for Simrad NSS12 evo2 or B&G Zeus² 12 for 9.5" Wide Guard
GP1200 Series for 9.5" Guard, SailPods for Sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.
SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.
Sizing:
Overall Size: 11.3"H x 16.5"W x 5.55"D
Usable Face: 9.85"H x 15.18"W x 4.25"D
Max Cutout:9"H x 14.25"W
All SailPods include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-proof fasteners and wrench
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
|
436.34 |
|