Autopilot Isolation Hose Kit Add electrical ground isolation with this Garmin hose kit. Isolation hoses are installed between our 1.2 L (0.32 gal) and 2 L (0.53 gal) autopilot pumps and the boat's steel-braided Mercury Verado steering hose.  Compatible Devices: GHP Reactor™ Hydraulic Autopilot Kit Includes: Two 12-inch (30.48 cm) high-pressure reinforced No. 4 diameter hoses WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

Autopilot Check Valve Kit This check valve kit is used with the 1.2L and 2.0L autopilot pumps to isolate them from the steering system when the autopilot is not active. Check valves to prevent slow pressure leak down through the pump while disengaged. Boats with rudder trim tabs (outboard or rudder) that are properly adjusted do not need this check valve kit. Compatible Devices: Reactor™ 40 Hydraulic Autopilot with GHC™ 20 Autopilot Instrument Reactor™ 40 Hydraulic Autopilot with GHC™ 50 Autopilot Instrument  Reactor™ 40 Hydraulic Autopilot without GHC™ Autopilot Instrument  

i50 SeaTalkng Instruments - Tridata with Thru-Hull Transducer The i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays. For the ultimate in flexibility, the i50 Instruments support SeaTalkng CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of the i50 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument has a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i50 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase. i50 Tridata Instrument  The i50 Tridata is a convenient 3-line instrument that combines the Speed and Depth Instruments functions into one display. This makes the i50 Tridata ideal for installations on helms where space is a premium or as a depth and speed repeater solution for other locations on the boat. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Use a primary display or as a repeater of i50 depth and speed instruments Built-in depth and speed transducer connections M78713-PZ Nylon Depth Transducer with 45ft cable E70673 ST900/P120 S/T Thru Hull - 13.7m Cable The i50 Tridata's 3-line LCD can show current depth, current speed, distance log, trip log, and water temperature. Additional display modes include maximum speed, average speed, and VMG to windward. Tridats have a count-up timer and 2 race start timers for racers. Tridata's robust alarm functions include a shallow depth alarm, deep depth alarm, shallow anchor alarm, and deep anchor alarm. Features: Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems. Large, crisp LCDs with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70, and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

Autopilot Pump Fitting Kit for ORB Systems with SteadySteer Switch Fitted hose kit designed for simplified SteadySteer installations into ORB steering systems, reducing the incidence of faulty field terminated hydraulic hoses and incorrect installation layouts. SteadySteer Benefits: Control the autopilot using the helm – enhanced usability Steer manually through turns - a convenient manual override Hassle-free Autopilot reengagement - reengages automatically on straight legs Seamless and intuitive boat control Increased convenience without sacrificing safety with SteadySteer – a functionality for autopilot systems that enables immediate, manual control of a vessel through turns without disengaging the autopilot. Coming out of turns, SteadySteer automatically reengages the autopilot once a new heading is established – no key-presses required. Navigate safely with SteadySteer, a functionality for autopilot systems that allows boaters to take immediate, manual control of the vessel through turns without having to disengage the autopilot. Coming out of turns, SteadySteer automatically reengages the autopilot once a new heading is established. Control the Autopilot with the Helm SteadySteer automatically disengages the autopilot when you turn the vessel manually and then reengages the autopilot when you have established a new heading.  No key-presses, no alarms – just turn the helm. Fewer Distractions – Just Drive No need to look at a display or push buttons to change course, merely point the bow at your destination. Kit Contains: 2 x Hoses 5/16" dia. (Black) 1500 PSI max, 810mm (31.9”),  9/16”-18 UNF to 9/16”-18 UNF 2 x Hoses 5/16" dia. (Black) 1500 PSI max, 360mm (14.2”) 9/16”-18 UNF to 9/16”-18 UNF 2 x T Connector ORB-5 to 9/16”-18UNF > 9/16”-18 UNF 1 x Right angle connector ORB-05 to 9/16”-18 UNF 2 x Adaptor ¼” NPT to 9/16”-18 UNF 1 x SteadySteer Flow Sensor 1 x Bottle of Hydraulic Fluid 1 x Filter Funnel

Keywords: raymarine, i70 multifunction color instrument, i50 instrument, raymarine depth gage, raymarine speed gage, raymarine tridata instrument display, raymarine instrument displays, raymarine multifunction display

Verado Hydraulic Hose Kit The Verado Hydraulic Hose Kit is a kit specifically designed for installing a SmartPilot Autopilot System on Mercury Verado Engines.

Autopilot Backbone Cable Kit This autopilot backbone cable kit is required to connect the X-10, X-30, X-CAN and X-SOL corepacks to the ST70 Autopilot Control Head. Kit Includes A06028 - STNG T-piece connector (2) A06031 - Backbone terminators (2) A06036 - Backbone cable 5M

25' Blue Flexible Hose Kit with Rubber Tip Nozzle HoseCoil Flexible Hose Kits are designed and built for durability. The hose has a 600 PSI rating and is protected by a UV-resistant l0O0D Tetoron fabric outer cover. This material is extremely tough, with excellent resistance to abrasion and fading. It is mold and water-resistant, dries quickly, and is designed to easily slide across surfaces without getting snagged or leaving marks like some traditional garden hoses. The hose fittings are built from non-marring sturdy black plastic, and the spigot fitting features a brass end for added strength. The fittings are field¬serviceable, meaning that they can be disassembled and reassembled if the hose ever needs to be repaired. The included spray nozzle is our popular WNSl0 model with a soft rubber comfort grip and impact-resistant rubber tip to protect surfaces from drop damage.  Features: Lightweight and strong 600 PSI durable hose Field serviceable fittings Rubber Tip Nozzle included

50' Blue Flexible Hose Kit with Rubber Tip Nozzle HoseCoil Flexible Hose Kits are designed and built for durability. The hose has a 600 PSI rating and is protected by a UV-resistant l0O0D Tetoron fabric outer cover. This material is extremely tough, with excellent resistance to abrasion and fading. It is mold and water-resistant, dries quickly, and is designed to easily slide across surfaces without getting snagged or leaving marks like some traditional garden hoses. The hose fittings are built from non-marring sturdy black plastic, and the spigot fitting features a brass end for added strength. The fittings are field¬serviceable, meaning that they can be disassembled and reassembled if the hose ever needs to be repaired. The included spray nozzle is our popular WNSl0 model with a soft rubber comfort grip and impact-resistant rubber tip to protect surfaces from drop damage.  Features: Lightweight and strong 600 PSI durable hose Field serviceable fittings Rubber Tip Nozzle included

75' Blue Flexible Hose Kit with Rubber Tip Nozzle HoseCoil Flexible Hose Kits are designed and built for durability. The hose has a 600 PSI rating and is protected by a UV-resistant l0O0D Tetoron fabric outer cover. This material is extremely tough, with excellent resistance to abrasion and fading. It is mold and water-resistant, dries quickly, and is designed to easily slide across surfaces without getting snagged or leaving marks like some traditional garden hoses. The hose fittings are built from non-marring sturdy black plastic, and the spigot fitting features a brass end for added strength. The fittings are field¬serviceable, meaning that they can be disassembled and reassembled if the hose ever needs to be repaired. The included spray nozzle is our popular WNSl0 model with a soft rubber comfort grip and impact-resistant rubber tip to protect surfaces from drop damage.  Features: Lightweight and strong 600 PSI durable hose Field serviceable fittings Rubber Tip Nozzle included

RhinoEXTREME 15' Sewer Hose Kit with Swivel Fitting 4 In 1 Elbow Caps Camco's RV Rhino EXTREME 15' Sewer Hose Kit has all of the features that Rivers are looking for in a sewer hose. The Rhino EXTREME hose will not dent or rust and will not crush if accidentally stepped on. The sewer hose offers superior abrasion resistance for maximum protection against pinholes and leaks. The 15' kit comes with pre-attached Rhino swivel fittings, snap-glue fittings, and storage caps. The hose has been successfully tested down to -40 degrees Fahrenheit. The removable 4-in-1 adapter allows you to store in 4” square bumpers. Features: Sewer hose has superior abrasion resistance and crush protection Includes pre-attached Rhino swivel fittings - bayonet and transparent elbow with 4-in-1 dump station fitting Also includes snap-glue fittings and storage caps. 4-in-1 adapter allows storage in 4" square bumpers Rhino EXTREME hose will not dent or rust and will not crush if accidentally stepped on Rhino EXTREME hose will not dent or rust and will not crush if accidentally stepped on

XPS Hose Kit - 7' This Panther hose kit is needed for the Panther XPS System. Features: The low-pressure hose is 12 in. longer to allow for uninterrupted travel when connected to the cylinder actuator 7 ft. – 1/4 in. Hi-Pressure Hose  8 ft. – 5/16 in. Return Hose Includes: Contains two hoses high pressure and low pressure—with fittings

XPS Hose Kit - 6' This Panther hose kit is needed for the Panther XPS System. Features: The low-pressure hose is 12 in. longer to allow for uninterrupted travel when connected to the cylinder actuator 6 ft. – 1/4 in. Hi-Pressure Hose  7 ft. – 5/16 in. Return Hose Includes: Contains two hoses high pressure and low pressure—with fittings

XPS Hose Kit - 8' This Panther hose kit is needed for the Panther XPS System. Features: The low-pressure hose is 12 in. longer to allow for uninterrupted travel when connected to the cylinder actuator 8 ft. – 1/4 in. Hi-Pressure Hose  9 ft. – 5/16 in. Return Hose Includes: Contains two hoses high pressure and low pressure—with fittings