GMR 18 HD3 18" Radar Dome This compact 18" dome radar combines ease of use with powerful scanning features that work to maximize your confidence and situational awareness on the water. Features: 4 KW power output, 36 nautical mile max range Space-saving 18" dome Marpa target tracking Dynamic auto gain and sea filter Dual-radar support Quiet dome drive motor Dual-Radar Support  Using dual radar provides redundancy and allows each display unit on the boat to pull data from one of two different radar sources. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Radar Overlay Overlay radar images onto your chartplotter’s map page. You can add an optional autopilot or heading sensor (sold separately) for the best results. MARPA Target Tracking MARPA tracks selected targets to help keep track of other vessels and avoid collisions (with appropriate sensors, sold separately). Low-Noise Scanning  The reliable GMR HD3 dome drive motor spins at a fixed 24 rpm, offering reliable, low-noise operation and minimal power consumption. Compact and Powerful 4 kW of transmit power, a 36 nautical mile maximum range, and clear echo definition at all ranges. Close-In Target Scanning Minimum scanning range of 20 meters for excellent short-range detection and target detail. High-Resolution Radar 8-bit true color for outstanding target separation with less screen clutter. Timed Transmit Mode Specify transmit times down to the seconds to help reduce power consumption. Intuitive operation No complex user settings, so it’s easy to install and start using. In the Box: GMR 18 HD3 dome radar Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions General: Dimensions: 20" diameter, 9.8" high (508 mm diameter, 248 mm high) Weight: 7.0 kg Waterproof: IPX7 Antenna length: 17" (43 cm) Rotation Speed (RPM): 24 rpm Beam Width: 5.2° horizontal, 25° vertical Maximum Range: 36 nm Minimum Range: 20 meters Radar Type: Radome Electrical Features: Power Input: 11-32 v DC Power Consumption (Standby): 15 W Typical Power Consumption, Transmitting (Normal Mode): 40 W Transmit Power: 4 KW Radar Features: Overlay: Yes Dual Radar Support: Yes Auto Gain: Dynamic MARPA Target Tracking: Yes (requires heading sensor, sold separately)

GMR™ 434 xHD3 4' Open Array Radar & Pedestal - 4kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 72-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor  New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 4 kW open array radar with 4’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     4' array and pedestal - 27.6 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.8° horizontal, 23° vertical Maximum Range: 72 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 11-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 55 W Transmit Power: 4 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 436 xHD3 6' Open Array Radar & Pedestal - 4kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 6’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 72-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 4 kW open array radar with 6’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     6' array and pedestal - 29.6 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 72 in. (183 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.1° horizontal, 23° vertical Maximum Range: 72 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 11-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 55 W Transmit Power: 4 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 1234 xHD3 4' Open Array Radar & Pedestal - 12kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 12 kW open array radar with 4’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     4' array and pedestal - 27.7 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.8° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 12 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 1236 xHD3 6' Open Array Radar & Pedestal - 12kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 6’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 12 kW open array radar with 6’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     6' array and pedestal - 29.7 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 72 in. (183 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.1° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 12 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 2534 xHD3 4' Open Array Radar & Pedestal - 25kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 25 kW open array radar with 4’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     4' array - 1325 x 122 x 170 mm / 52.2" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     4' array and pedestal - 28.4 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.8° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 25 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR™ 2536 xHD3 6' Open Array Radar & Pedestal - 25kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR Combining high-definition imaging with the latest Garmin platform technology, this robust 4’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96-nautical mile range Scan Averaging Technology Improved Target-Size Processing  Split-Screen Dual-Range Display 100-Knot Commercial Grade Wind Rating1  Quiet Open-Array Drive Motor New Scan Averaging Technology A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. True Echo Trails A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. Includes: GMR xHD3 25 kW open array radar with 6’ antenna Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions Dimensions:     6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7" Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4" Weight:     6' array and pedestal - 30.4 kg Specifications: Waterproof: IPX6 Max Wind Load: 80KT (100KT with optional voltage converter upgrade) Antenna length: 48 in. (122 CM) Rotation Speed (RPM): 24 and 48 RPM Beam Width: 1.1° horizontal, 23° vertical Maximum Range: 96 nautical miles Minimum Range: 20 meters Radar Type: Open-array Electrical Features: Power Input: 10-32 V DC Power Consumption (Standby): 18 W Typical Power Consumption, Transmitting (Normal mode): 70 W Transmit Power: 25 kW 14-kW versions require optional equipment (sold separately) for 100-knot wind rating WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

GMR 18 xHD3 18" Radar Dome Loaded with advanced features typically found on open arrays, this powerful 18" dome radar offers superior traffic, obstacle, and weather detection for peace of mind on the water. Features: 4 KW power output, 48 nautical mile max range Scan-averaging technology Improved target-size processing Split-screen dual-range display Bird detection Quiet dome-drive motor Scan Averaging Technology  A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. Faster Scanning Antenna  Rotation speeds up to 60 rpm improve the redraw rate for faster target updates. True Echo Trails A historical "trail" of boats on the water is displayed on the screen, removing relative motion influences to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range settings and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore, and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance thanks to a narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium, and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface, where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. In the Box: GMR 18 xHD3 dome radar Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions General: Dimensions: 20" x 9.8" (508 mm x 248 mm) Weight: 7.0 kg Waterproof: IPX7 Antenna length: 17" (43 cm) Rotation Speed (RPM): Up to 60 RPM, depending on settings Beam Width: 5.2° horizontal, 25° vertical Maximum Range: 48 nm Minimum Range: 20 meters Radar Type: Radome Electrical Features: Power Input: 11-32 v DC Power Consumption (Standby): 15 W Typical Power Consumption, Transmitting (Normal Mode): 40 W Transmit Power: 4 KW Radar Features: Dual Range: Yes Overlay: Yes Dual Radar Support: Yes Auto Bird Gain: Yes Auto Gain: Dynamic MARPA Target Tracking: Yes (requires heading sensor, sold separately) Echo Trails: True Target Size: Yes Scan Averaging: Yes

GPSMAP® 1243xsv with GMR™ 18 HD3 Radome With its sleek design, powerful processing, and upgraded IPS display, this advanced 12" chartplotter integrates seamlessly into your Garmin marine system. Features: Easily integrate with more engines Connect to compatible third-party devices with OneHelm™ digital switching Easily build your marine system using the best network connectivity Navigate any waters with preloaded Garmin Navionics+™ charts and mapping See below for your boat's built-in sonar capabilities Manage your marine experience from nearly anywhere Ultra-High-Definition Scanning Sonar Get built-in ultra-high-definition sidevü and clearvü™ scanning sonars with vivid, high-contrast color palettes to help distinguish fish from structure. Gpsmap® X3 series also supports 1 KW chirp traditional sonar capabilities. Panoptix™ Sonar Support Pair with panoptix or livescope™ easy-to-interpret live sonar (transducer required, sold separately) to see all around your boat in real-time. Faster, Sharper, Smarter With its added processing power and slimline design featuring edge-to-edge glass and a smaller unit footprint, it’s easy to retrofit this plotter in a wider range of dash configurations. Improved Display Optics This higher-resolution display offers improved sunlight readability and visibility from any angle, with 50% more pixels than previous-generation GPSMAP devices. Preloaded Mapping Experience unparalleled coverage and detail with built-in Garmin Navionics+ integrated coastal and inland mapping that includes Auto Guidance+™ technology3 and a 1-year subscription for downloadable daily updates and more on select chartplotters. Optional Charts & Maps Bring a fresh look and feel to your chartplotter with the optional upgrade to Garmin Navionics Vision+™ premium chart subscription, featuring downloadable high-resolution relief shading, satellite imagery, sonar imagery, and more. Optional Radar Bundle To help you avoid weather and traffic on the water, the compact 4 kW GMR™ 18 HD+ dome radar is available as a bundled option with your GPSMAP chartplotter/sonar package. Power-Pole® Shallow Water Anchor By networking select Garmin chartplotters with a force® trolling motor and your compatible power-pole shallow water anchoring system, you can access advanced boat control features from your plotter, including smart anchor auto-deployment, smart anchor jog, auto stow, anchor drag detection, and auto guidance end-of-route anchoring. Spend more time fishing and less time positioning. Garmin Sailassist™ Sailing Features  View laylines, race start line guidance, enhanced wind rose, heading and course-over-ground lines, true wind data fields, tide/current/time slider, wind angle, set and drift, wind speed, polars, and more. Sailing Polars Use the polar table to see key data, including how fast you should go at a certain wind angle and speed, so you know whether you need to adjust sail trim. Garmin Marine Network If you have multiple compatible Garmin devices on your boat, you can share information—such as maps, user data, radar, and IP camera video—among them. NMEA 2000® and NMEA 0183 Networks Connect to compatible autopilots, digital switching, weather, fusion-link™ audio system, media, VHF, AIS, and more from one screen. Activecaptain® App Built-in wi-fi® connectivity pairs with the free all-in-one mobile app for access to the onechart™ feature, smart notifications, software updates, helm, Garmin quickdraw™ community data, and more. Integrated Ant® Technology Connect with some of your favorite devices, such as Quatix® marine watches, gWind™ wireless 2 transducers, GNX™ wind marine instruments, and wireless remote controls. Engine Connectivity Now you can connect your chartplotter to different kinds of engines, including select Yamaha engines. OneHelm Feature This feature brings together all the operations and capabilities of select third-party devices, such as EmpirBus™ digital switching, on one screen. Send inReach® Device Messages Pair your inreach satellite COMMUNICATOR5 to your chartplotter and type custom messages using your mfd’s on-screen keyboard. Access your contact list or enter an email, inreach address, or phone number. You can also group messages by conversation for a texting-like experience. In the Box (chartplotter): GPSMAP 1243xsv chartplotter microSD™ card preinstalled Power cable NMEA 2000® T-connector NMEA 2000 drop cable (2 meters) 8-pin transducer to 12-pin sounder adapter cable Bail mount kit with knobs Flush mount kit with gasket Protective cover Trim-piece snap covers Documentation In the Box (radome): GMR 18 HD3 dome radar Power cable (49.21 ft) Network cable (49.21 ft) Mounting hardware kit and template Installation instructions General: Dimension: 12.1" x 8.9" x 3.2" (30.8 x 22.8 x 8.2 cm) Weight: 6.6 lbs (3.0 KG) Waterproof: IPX7 Touchscreen: Yes Display Type: WXGA Display Size: 10.3" x 6.4"; 12.1" diagonal (26.2 x 16.3 cm; 30.7 cm diagonal) Display Resolution: 1280 x 720 pixels Mounting Options: Bail, flush, or flat (Garmin does not offer any hardware or accessories for a flat-mount installation. Professional tools and knowledge is required.) Input: Touchscreen Maps & Memory: Accepts Data Cards: 2 MicroSD cards (Back of Unit) Waypoints: 5000 Track Points: 50,000 Tracks: 50 saved tracks Navigation Routes: 100 Sensors: GPS: Yes     Glonass: Yes Galileo: Yes Has Built-In Receiver: Yes     Receiver: 10Hz NMEA 2000 Compatible: Yes NMEA 0183 Compatible: Yes Supports WAAS: Yes Built-In Maps: Built-in Auto Guidance+: Yes Garmin Navionics+ Inland & Coastal: Yes Tide Tables: Yes Optional Map Support:  Garmin Navionics+™: Yes Garmin Navionics Vision+™: Yes Topo 100K: Yes Standard Mapping: Yes Garmin Quickdraw Contours: Yes Raster Chart Support: Yes Chartplotter Features: Smart Mode Compatible: Yes AIS: Yes     DSC: Yes Supports Fusion-Link™ Compatible Radios: Yes GSD Black Box Sonar Support: Yes GCV Black Box Sonar Support: Yes Activecaptain® Compatible: Yes Grid (Garmin Remote Input Device) Compatible: Yes Wireless Remote Compatible: Yes Sailing Features: Yes Spoken Audio Alerts: Yes Onehelm Support: Yes Electrical Features: Power Input: 10 to 32 Vdc Typical Current Draw at 12 Vdc: 1.37 A Maximum Current Draw at 12 Vdc: 3.20 A Maximum Power Usage at 10 Vdc: 40.2w Sonar Features & Specifications: Displays Sonar: Yes Power Output: 1 KW Traditional Sonar (Dual Frequency/Beam): Built-in (Single Channel Chirp, 50/70/83/200 Khz, L, M, H Chirp) Clearvü: Built-in 260/455/800/1000/1200 kHz Sidevü: Built-in 260/455/800/1000/1200 kHz Panoptix™ Sonar: Yes Livescope: Yes Connections: NMEA 2000® Ports: 1 Connections NMEA0183 Input Ports: 1 NMEA 0183 Input (TX) Ports: 1 Video Input Ports: 1 (BNC Composite) Video Output Ports: 1 HDMI J1939 Ports: 1 Garmin Marine Network Ports: 2 12-Pin Transducer Ports: 1 USB Ports: Yes BNC External GPS Antenna Port: Yes Bluetooth® Pairing: Yes Ant+ (Connectivity): Yes Garmin Wi-Fi Network (Local Connection): Yes

GPSMAP® 943xsv with GMR™ 18 HD3 Radome With its sleek design, powerful processing, and upgraded IPS display, this advanced 9" chartplotter integrates seamlessly into your Garmin marine system. Features: Easily integrate with more engines Connect to compatible third-party devices with OneHelm™ digital switching Easily build your marine system using the best network connectivity Navigate any waters with preloaded Garmin Navionics+™ charts and mapping See below for your boat's built-in sonar capabilities Manage your marine experience from nearly anywhere Ultra-High-Definition Scanning Sonar Get built-in ultra-high-definition sidevü and clearvü™ scanning sonars with vivid, high-contrast color palettes to help distinguish fish from structure. Gpsmap® X3 series also supports 1 KW chirp traditional sonar capabilities. Panoptix™ Sonar Support Pair with panoptix or livescope™ easy-to-interpret live sonar (transducer required, sold separately) to see all around your boat in real-time. Faster, Sharper, Smarter With its added processing power and slimline design featuring edge-to-edge glass and a smaller unit footprint, it’s easy to retrofit this plotter in a wider range of dash configurations. Improved Display Optics This higher-resolution display offers improved sunlight readability and visibility from any angle, with 50% more pixels than previous-generation GPSMAP devices. Preloaded Mapping Experience unparalleled coverage and detail with built-in Garmin Navionics+ integrated coastal and inland mapping that includes Auto Guidance+™ technology3 and a 1-year subscription for downloadable daily updates and more on select chartplotters. Optional Charts & Maps Bring a fresh look and feel to your chartplotter with the optional upgrade to Garmin Navionics Vision+™ premium chart subscription, featuring downloadable high-resolution relief shading, satellite imagery, sonar imagery, and more. Optional Radar Bundle To help you avoid weather and traffic on the water, the compact 4 kW GMR™ 18 HD+ dome radar is available as a bundled option with your GPSMAP chartplotter/sonar package. Power-Pole® Shallow Water Anchor By networking select Garmin chartplotters with a force® trolling motor and your compatible power-pole shallow water anchoring system, you can access advanced boat control features from your plotter, including smart anchor auto-deployment, smart anchor jog, auto stow, anchor drag detection, and auto guidance end-of-route anchoring. Spend more time fishing and less time positioning. Garmin Sailassist™ Sailing Features  View laylines, race start line guidance, enhanced wind rose, heading and course-over-ground lines, true wind data fields, tide/current/time slider, wind angle, set and drift, wind speed, polars, and more. Sailing Polars Use the polar table to see key data, including how fast you should go at a certain wind angle and speed, so you know whether you need to adjust sail trim. Garmin Marine Network If you have multiple compatible Garmin devices on your boat, you can share information—such as maps, user data, radar, and IP camera video—among them. NMEA 2000® and NMEA 0183 Networks Connect to compatible autopilots, digital switching, weather, fusion-link™ audio system, media, VHF, AIS, and more from one screen. Activecaptain® App Built-in wi-fi® connectivity pairs with the free all-in-one mobile app for access to the onechart™ feature, smart notifications, software updates, helm, Garmin quickdraw™ community data, and more. Integrated Ant® Technology Connect with some of your favorite devices, such as Quatix® marine watches, gWind™ wireless 2 transducers, GNX™ wind marine instruments, and wireless remote controls. Engine Connectivity Now you can connect your chartplotter to different kinds of engines, including select Yamaha engines. OneHelm Feature This feature brings together all the operations and capabilities of select third-party devices, such as EmpirBus™ digital switching, on one screen. Send inReach® Device Messages Pair your inreach satellite COMMUNICATOR5 to your chartplotter and type custom messages using your mfd’s on-screen keyboard. Access your contact list or enter an email, inreach address, or phone number. You can also group messages by conversation for a texting-like experience. In the Box (chartplotter): GPSMAP 943xsv chartplotter microSD™ card preinstalled Power cable NMEA 2000® T-connector NMEA 2000 drop cable (2 meters) 8-pin transducer to 12-pin sounder adapter cable Bail mount kit with knobs Flush mount kit with gasket Protective cover Trim-piece snap covers Documentation In the Box (radome): GMR 18 HD3 dome radar Power cable (49.21 ft) Network cable (49.21 ft) Mounting hardware kit and template Installation instructions General: Dimension: 9.2” x 6.4” x 3” (23.3 x 16.2 x 7.6 cm) Weight: 3.6 lbs (1.6 KG) Waterproof: IPX7 Touchscreen: Yes Display Type: WXGA Display Size: 7.8” x 4.4”; 9.0” diagonal (19.9 cm x 11.2 cm; 22.9 cm diagonal) Display Resolution: 1280 x 720 pixels Mounting Options: Bail, flush, or flat (Garmin does not offer any hardware or accessories for a flat-mount installation. Professional tools and knowledge are required.) Input: Touchscreen Maps & Memory: Accepts Data Cards: 2 MicroSD cards (Back of Unit) Waypoints: 5000 Track Points: 50,000 Tracks: 50 saved tracks Navigation Routes: 100 Sensors: GPS: Yes     Glonass: Yes Galileo: Yes Has Built-In Receiver: Yes     Receiver: 10Hz NMEA 2000 Compatible: Yes NMEA 0183 Compatible: Yes Supports WAAS: Yes Built-In Maps: Built-in Auto Guidance+: Yes Garmin Navionics+ Inland & Coastal: Yes Tide Tables: Yes Optional Map Support:  Garmin Navionics+™: Yes Garmin Navionics Vision+™: Yes Topo 100K: Yes Standard Mapping: Yes Garmin Quickdraw Contours: Yes Raster Chart Support: Yes Chartplotter Features: Smart Mode Compatible: Yes AIS: Yes     DSC: Yes Supports Fusion-Link™ Compatible Radios: Yes GSD Black Box Sonar Support: Yes GCV Black Box Sonar Support: Yes Activecaptain® Compatible: Yes Grid (Garmin Remote Input Device) Compatible: Yes Wireless Remote Compatible: Yes Sailing Features: Yes Spoken Audio Alerts: Yes Onehelm Support: Yes Electrical Features: Power Input: 10 to 32 Vdc Typical Current Draw at 12 Vdc: 1.37 A Maximum Current Draw at 12 Vdc: 3.20 A Maximum Power Usage at 10 Vdc: 40.2w Sonar Features & Specifications: Displays Sonar: Yes Power Output: 1 KW Traditional Sonar (Dual Frequency/Beam): Built-in (Single Channel Chirp, 50/70/83/200 Khz, L, M, H Chirp) Clearvü: Built-in 260/455/800/1000/1200 kHz Sidevü: Built-in 260/455/800/1000/1200 kHz Panoptix™ Sonar: Yes Livescope: Yes Connections: NMEA 2000® Ports: 1 Connections NMEA0183 Input Ports: 1 NMEA 0183 Input (TX) Ports: 1 Video Input Ports: 1 (BNC Composite) J1939 Ports: 1 Garmin Marine Network Ports: 1 12-Pin Transducer Ports: 1 USB Ports: Yes BNC External GPS Antenna Port: Yes Bluetooth® Pairing: Yes Ant+ (Connectivity): Yes Garmin Wi-Fi Network (Local Connection): Yes

Garmin GMR Fantom™ 256 Radar THE POWER TO SEE MORE GMR Fantom™ 256 is the most powerful 6’ consumer solid-state radar. The GMR Fantom™ 256, our most powerful 6’ solid-state radars, feature 250 W of power. They use MotionScope™ technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. New MARPA Automatic Acquisition allows for triggering and tracking with no user prompting on all returns, boundary zones, guard zones or MotionScope. Scan-to-scan averaging, a new feature, helps aid in reduction of sea clutter and interference. Its Pulse Compression technology provides high-resolution imaging and maximizes energy to help you detect and identify targets. Auto Bird Gain helps you identify flocks of birds on the water. The GMR Fantom 256 radar have a detection range of 20’ to 96 nautical miles. Features: We’ve got the power. 250 watts of it to be exact.  Know the long and short of it with a detection range of 20’ to 96 nautical miles.  MotionScope™ highlights everything that moves so there are no surprises.  The more the merrier with MARPA. Keep track of up to 30 moving targets.  Clear the clutter with scan-to-scan averaging. MotionScope™ Technology Detect and highlight moving targets in different colors to help avoid collisions, find flocks of birds and track weather from 20’ to 96 nautical miles. Automatic Acquisition New mini-automatic radar plotting aid (MARPA) automatic acquisition allows for triggering and tracking of up to 30 targets with no user prompting on all returns, boundary zones, guard zones or MotionScope™. Clear The Way Scan-to-scan averaging aids in reduction of sea clutter and interference, so you have a clear view of what’s out there.  Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface.  Pulse Compression This feature provides high-resolution imaging while maximizing energy to enhance target detection and identification.  Echo Trails True Echo Trails feature displays a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat.  Radar Overlay Overlay radar on your chart screen as single display or split screen with independent range settings.  Dynamic Sea Filter Dynamic Sea Filter automatically adjusts gain to calm, medium and rough sea conditions.  Guard Zone Set the safety zone and receive an alarm when an object enters the zone.  In The Box GMR Fantom 256 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Voltage converter Documentation

Garmin GMR Fantom™ 254 Radar THE POWER TO SEE MORE GMR Fantom™ 254 is the most powerful 4’ consumer solid-state radar. The GMR Fantom™ 254, our most powerful 4’ solid-state radars, feature 250 W of power. They use MotionScope™ technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. New MARPA Automatic Acquisition allows for triggering and tracking with no user prompting on all returns, boundary zones, guard zones or MotionScope. Scan-to-scan averaging, a new feature, helps aid in reduction of sea clutter and interference. Its Pulse Compression technology provides high-resolution imaging and maximizes energy to help you detect and identify targets. Auto Bird Gain helps you identify flocks of birds on the water. The GMR Fantom 254 radar have a detection range of 20’ to 96 nautical miles. Features: We’ve got the power. 250 watts of it to be exact.  Know the long and short of it with a detection range of 20’ to 96 nautical miles.  MotionScope™ highlights everything that moves so there are no surprises.  The more the merrier with MARPA. Keep track of up to 30 moving targets.  Clear the clutter with scan-to-scan averaging. MotionScope™ Technology Detect and highlight moving targets in different colors to help avoid collisions, find flocks of birds and track weather from 20’ to 96 nautical miles. Automatic Acquisition New mini-automatic radar plotting aid (MARPA) automatic acquisition allows for triggering and tracking of up to 30 targets with no user prompting on all returns, boundary zones, guard zones or MotionScope™. Clear The Way Scan-to-scan averaging aids in reduction of sea clutter and interference, so you have a clear view of what’s out there.  Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface.  Pulse Compression This feature provides high-resolution imaging while maximizing energy to enhance target detection and identification.  Echo Trails True Echo Trails feature displays a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat.  Radar Overlay Overlay radar on your chart screen as single display or split screen with independent range settings.  Dynamic Sea Filter Dynamic Sea Filter automatically adjusts gain to calm, medium and rough sea conditions.  Guard Zone Set the safety zone and receive an alarm when an object enters the zone.  In The Box GMR Fantom 254 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Voltage converter Documentation

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

GMR 24 xHD3 24" Radar Dome Loaded with advanced features typically found on open arrays, this powerful 24" dome radar offers superior traffic, obstacle, and weather detection for peace of mind on the water. Features: 4 KW power output, 48 nautical mile max range Scan-averaging technology Improved target-size processing Split-screen dual-range display Bird detection Quiet dome-drive motor Scan Averaging Technology  A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets. Angular Target-Size Adjustment Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales. Faster Scanning Antenna  Rotation speeds up to 60 rpm improve the redraw rate for faster target updates. True Echo Trails A historical "trail" of boats on the water is displayed on the screen, removing relative motion influences to help you quickly identify moving targets and potential collision threats. Dual Range with Overlay A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range settings and controls for both close and long range. Overlay either or both ranges on a chart. Dynamic Auto Gain Gain automatically adjusts levels to optimum settings for harbors, near shore, and offshore in open waters. Radar Overlay See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately). High-Resolution Radar Pick out targets at a distance thanks to a narrow horizontal beamwidth and high antenna gain. Dual-Radar Support This provides redundancy and allows each display unit to pull data from different sources. Dynamic Sea Filter Radar gain automatically adjusts sea clutter for calm, medium, and rough sea conditions. Auto Bird Gain Locate flocks of birds at the water’s surface, where baitfish are also likely to be found. MARPA Target Tracking Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately). Guard Zone Set the safety zone and receive an alarm when an object enters the zone. Range and Bearing Cues Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land. In the Box: GMR 24 xHD3 dome radar Power cable (15 m/49.21 ft) Network cable (15 m/49.21 ft) Mounting hardware kit and template Installation instructions General: Dimensions: 25.4" x 9.8" (64.5 cm x 24.9 cm) Weight: 7.0 kg Waterproof: IPX7 Antenna length: 17" (43 cm) Rotation Speed (RPM): Up to 60 RPM, depending on settings Beam Width: 3.7° horizontal, 25° vertical Maximum Range: 48 nm Minimum Range: 20 meters Radar Type: Radome Electrical Features: Power Input: 11-32 v DC Power Consumption (Standby): 15 W Typical Power Consumption, Transmitting (Normal Mode): 40 W Transmit Power: 4 KW Radar Features: Dual Range: Yes Overlay: Yes Dual Radar Support: Yes Auto Bird Gain: Yes Auto Gain: Dynamic MARPA Target Tracking: Yes (requires heading sensor, sold separately) Echo Trails: True Target Size: Yes Scan Averaging: Yes

GMR Fantom™ 56 - 6' Open Array Radar High-powered Open-Array Radar 6’, 50W solid-state open-array radar with pedestal MotionScope™ technology detects and highlights moving targets in different colors to help avoid collisions, find flocks of birds and track weather Pulse Compression technology provides high-resolution imaging while maximizing energy to enhance target detection and identification True echo trails display a fading trail to help you quickly and easily identify moving targets while accounting for the movement of your own boat Overlay radar on your chart screen as single display or split screen with independent range settings The GMR Fantom 54 solid-state radar with 50 W of power uses MotionScope technology to detect and highlight moving targets in different colors, which helps you avoid potential collisions, find flocks of birds and track weather. It includes Pulse Compression technology that provides high-resolution imaging and maximizes energy to help you detect and identify targets. It has a detection range of 20’ to 72 nautical miles. High-power 50W Radar with Narrow Beam You get excellent close- and long-range target detection from as close as 20’ to 72 nautical miles, even in fog or rain. The narrow horizontal beamwidth provides a high-resolution image, and the high antenna gain picks out weak targets at a distance. This radar paints a clear, concise image of the shoreline, other vessels and impending weather — right on your Garmin chartplotter. Get consistent target positions, excellent target separation that helps you distinguish large targets from small ones and adjustable rotation speed for fast screen updates. MotionScope Doppler Technology GMR Fantom uses the Doppler effect to detect and highlight moving targets to help you avoid potential collisions, find flocks of birds and track weather formations. The Doppler effect is the frequency shift in the radar echo due to the relative motion of the target. This allows for instant detection of any targets moving toward or away from the radar. MotionScope highlights the moving targets on the radar display so you can navigate around other boats or severe weather — or toward fishing spots where birds are feeding at the surface. Echo Trails A fading “trail” is left on the screen to help you quickly and easily identify moving targets and potential collision threats. Trails are corrected for your boat’s rotation when an autopilot or heading sensor is connected to your Garmin network. Auto Bird Gain Where there are birds on the water’s surface, there are fish below it. Auto Bird Gain helps you locate flocks of birds at the water’s surface where baitfish are likely to be found. Dynamic Auto Gain and Sea Filter Settings Dynamic Auto Gain automatically adjusts to your surroundings for optimal performance in all conditions. Dynamic Sea Filter automatically adjusts gain to changing sea conditions with user options for low, medium or high filtering. Target Size You can increase the size of targets on screen to help differentiate from noise, or reduce the size to sharpen shoreline details. Dual Range with Radar Overlay The single radar antenna can display radar images on your chartplotter map page side by side, with independent range settings and controls for both close and long range. One or both ranges can also be viewed as a chart overlay. An autopilot or heading sensor is recommended for best results. MARPA Target Tracking Mini-automatic radar plotting aid (MARPA) tracks up to 10 selected targets, helping you keep track of other vessels and avoid collisions. Dual Radar Support This provides redundancy and the ability for each display unit on the boat to select data from 1 of 2 different radar sources. Guard Zone Set the safety zone, and receive an alarm when an object enters the zone. Easy Interpretation Variable range markers (VRM) and electronic bearing lines (EBL) allow rapid measurements of distance and bearing to vessels and land. It fits the selected radar range to the vertical size of your display to show more forward-looking radar returns on screen and make it easier to interpret target distances. Easy to Install and Use All our radars are designed to be easy to install and easy to use. There are no complex user settings to adjust; just install your radar, and start using it. You can rely on the GMR Fantom radar to provide reliable, optimum performance in all conditions. In The Box GMR Fantom 56 antenna and pedestal Mounting hardware kit and template Right angle power cable (15 meters) Right angle network cable (15 meters) Documentation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.