JCU-2 Joystick Controller The joystick is the primary control for the M400 & M400XR and the M300 series (M300C, M332, M364, M364C, and M364C LR. It is used to wake the system or put it in standby, operate the pan and tilt movement, zoom the camera, control cameras modes and features, and configure system settings by means of OSD menus. Includes:  Includes: JCU-2 keypad Keypad mat Mounting gasket 4 x mounting screws, rubber washers, mounting clamps Cable gland nut RJ45-to-RJ45 Ethernet cable, 7.6 m (25 ft) Documentation pack 

JCU-2 Joystick Control Unit & POE Injector Kit JCU-2 Joystick Control Unit The joystick is the primary control for the M400 & M400XR and the new M300 series (M300C, M332, M364, M364C, and M364C LR. It is used to wake the system or put it in standby, operate the pan and tilt movement, zoom the camera, control cameras modes and features, and configure system settings by means of OSD menus. Includes  Joystick Control Unit (JCU2) Mounting hardware Power Over Ethernet Injector - 12V FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit. Includes: JCU-2 keypad Keypad mat Mounting gasket 4 x mounting screws, rubber washers, mounting clamps Cable gland nut RJ45-to-RJ45 Ethernet cable, 7.6 m (25 ft) Documentation pack  POE injector

JCU-1 Joystick Control Unit & Poe Injector Kit The M-Series controller is simple to use, provides precise system control, and lets users access all of the important camera functions with push-button controls. Controller Functions: Heated LCD screen - Instantly displays system status User-programmable "hot key" for commonly used functions Scene selection allows the operator to optimize the system's performance for specific situations - Night Running, Day Running, Night Docking, and Man Overboard User-selectable color palettes change the video display mode for easier viewing based on operator preference User-programmable Home button allows the operator to point the pan/tilt camera to pre-defined positions with the push of a button Precision proportional pointing control is provided through a custom, sealed, 8-way iDrive style control knob Backlit for easy nighttime readability; the sealed buttons are easy to see and provide positive tactile feedback The controller is fully sealed for survival in a maritime environment, and meets IPx6 standards Install as many control stations around your vessel as you want, thanks to the system's easy Ethernet connectivity Power Over Ethernet Injector - 12V FLIR's 12V Power Over Ethernet Injector is a key component in connecting your FLIR maritime thermal imaging camera to an Ethernet-equipped Joystick Control Unit.

JCU-1 Joystick Control Unit for M-Series - RJ45 Connection The M-Series controller is simple to use, provides precise system control, and lets users access all of the important camera functions with push-button controls. Controller Functions: Heated LCD screen - Instantly displays system status User-programmable "hot key" for commonly used functions Scene selection allows the operator to optimize the system's performance for specific situations - Night Running, Day Running, Night Docking, and Man Overboard User-selectable color palettes change the video display mode for easier viewing based on operator preference User-programmable Home button allows the operator to point the pan/tilt camera to pre-defined positions with the push of a button Precision proportional pointing control is provided through a custom, sealed, 8-way iDrive style control knob Backlit for easy nighttime readability; the sealed buttons are easy to see and provide positive tactile feedback The controller is fully sealed for survival in a maritime environment, and meets IPx6 standards Install as many control stations around your vessel as you want, thanks to the system's easy Ethernet connectivity

JCU3 Compact Joystick for M100/200 - Raymarine RayNet Network FLIR’s JCU-3 Joystick Controller works with select Thermal Camera Systems to allow full access to the camera’s pan, tilt, zoom and menu settings.  The JCU-3 features 9 buttons plus a rotary controller and joystick trackpad in a compact housing the fits just about anywhere.  The JCU-3 can be mounted either horizontally or vertically using either of the 2 supplied key faces. The JCU-3 is rugged and waterproof for mounting in the pilothouse or on-deck.  It can be surface or flush mounted to your helm, console or bulkhead.  Multiple JCU-3 controllers can be installed to allow control of a single camera from several different locations onboard. The JCU-3’s keypad and rotary knob are backlit for easy viewing at night.  The JCU-3 can bepowered over Ethernet from the vessel’s onboard network, or connected directly to a 12V DC power source and interfaced to the camera with an Ethernet connection.    The JCU-3 is compatible with FLIR M100, M200 (M132, M232) M300, (M300, M332, M354, M364c, M364C LR.

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

Weather Cover for Joystick Control Unit FLIR's Joystick Control Unit Weather cover is a protective covering for the Joystick Control Unit of your maritime thermal imaging camera. It is designed to protect your Joystick Control Unit (JCU) from the dangers of the open ocean. Built specifically for marine use, JCU Weather Cover has been designed by FLIR to guard against salty spray, moisture, and other irritants that could potentially damage your thermal camera's Joystick Control Unit. You should always put this thermal imaging accessory on your JCU when it is not in use to prevent possible damage. Keep it operating smoothly by using the FLIR Weather Cover. Features: Protective covering Protects the electronics of your Joystick Control Unit (JCU) Guards against moisture, salt and other irritants found in marine environments

MD-324 Thermal Night Vision Camera with Joystick Control Unit This affordable, fixed-mount thermal night vision system helps with steering around obstacles, collision avoidance and finding people in the water at night. Simple to mount and easy to integrate into your existing electronics, MD-Series' display can be mounted separately on your dashboard, or the feed can be integrated into an existing display to save space. Now even small boats can see clearly at night with the MD-Series Fixed Mount Thermal Night Vision Camera from FLIR. The MD-324 features a 320 x 240 pixel thermal imager with a wide angle 19mm lens, a 2X digital zoom allowing you to magnify distant targets for enhanced viewing and identification & 30Hz refresh for smooth, clear images. The MD-Series delivers stunning detail and clarity day or night thanks to its state-of-the-art FLIR thermal imaging technology. The camera can easily detect floating objects, navigation aids, other vessels, and even people in the water with ease. Engineered for smaller cruising, fishing and sailing vessels, MD-Series is both compact and lightweight. The camera measures 5.9" in diameter and just 7" high. The small footprint allows the camera to easily mount on any T-top, cabin roof, radar arch or mast. Features: Available in 320 x 240 2x e-zoom standard Ethernet-enabled for simple integration into your current electronics Slim profile (7" high and only 3 pounds) makes for an unobtrusive mount *Comes with a Joystick Control Unit

MD-625 Static Thermal Night Vision Camera with Joystick Control Unit This affordable, fixed-mount thermal night vision system helps with steering around obstacles, collision avoidance and finding people in the water at night. Simple to mount and easy to integrate into your existing electronics, MD-Series' display can be mounted separately on your dashboard, or the feed can be integrated into an existing display to save space. Now even small boats can see clearly at night with the MD-Series Fixed Mount Thermal Night Vision Camera from FLIR. Fast-moving crafts will appreciate the enhanced long-range performance of the MD-625 camera with a high-resolution 640 x 480 thermal imager and 25mm lens. The MD-625 has a 2X and 4X digital zoom for enlarging distant targets & 30 Hz refresh for smooth, clear images. The MD-Series delivers stunning detail and clarity day or night thanks to its state-of-the-art FLIR thermal imaging technology. The camera can easily detect floating objects, navigation aids, other vessels, and even people in the water with ease. Engineered for smaller cruising, fishing and sailing vessels, MD-Series is both compact and lightweight. The camera measures 5.9" in diameter and just 7" high. The small footprint allows the camera to easily mount on any T-top, cabin roof, radar arch or mast. Features: 640 x 480 resolution 4x e-zoom Ethernet-enabled for simple integration into your current electronics Slim profile (7" high and only three pounds) makes for an unobtrusive mount *Comes with a Joystick Control Unit

TCD2042 Thruster Joystick Control The traditional TCD/WCD/TSC controls have been renewed. The updated design matches the style of the QNC Quick Nautical Control commands, which feature a glossy black tempered glass panel. The TCD/WCD/TSC controls differ from the QNC range in the choice of materials they feature a special and scratch-resistant glossy Lexan instead of the tempered glass. The fixing method is different as well: the traditional screws have been replaced by a special 3M VHB double-sided gasket, which allows for faster installation. The technical and operating characteristics of the TCD, WCD, and TSC controls are identical to those of the previous models. Features: A special 3M VHB double-sided gasket that allows for a faster installation Made of scratch-resistant glossy Lexan

Keywords: raymarine, i70 multifunction color instrument, i50 instrument, raymarine depth gage, raymarine speed gage, raymarine tridata instrument display, raymarine instrument displays, raymarine multifunction display

Replacement Joystick Control for 22200 and 22201 M-100 Halogen Spotlights The replacement joystick control is for specific use with the 22200 and 22201 M-100 spotlights. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Raritan Sea Era Toilet - Marine Size - Freshwater Solenoid - Straight & 90° Discharge - Smart Toilet Control - 12v This robust little electric marine toilet is the perfect fit for someone looking for a reliable macerator as a step up from a manual toilet. The base is able to rotate 90 degrees allowing it to fit nicely in spots where a manual toilet had been installed. The SeaEra QC differentiates itself from the original SeaEra by offering the installation option of either pressurized freshwater with a solenoid valve that is built into the base or with a remote intake pump for outside raw water. Features: Powerful flushing action with advanced design features An excellent replacement for less durable non-Raritan units Low water usage (as little as 1 quart (1 liter)) Bowl can be rotated 90 degrees for mounting in confined spaces Full size joker valve reduces clogs Stainless steel macerating blade Household or marine size bowls available Self-priming inlet pump can be run dry Separation of intake and discharge means dirty water cannot enter bowl if seal fails Two year warranty Both 90 degree and straight discharge included The Raritan Programmable Smart Toilet Control: The Raritan Smart Toilet Control is a fully programmable flush control. The control allows users to flush the toilet with no water, a small amount of water or a fully timed flush. the timed flush feature can be adjusted on the panel without having to remove any components. Normal Flush - starts a timed flush, walk away and the toilet will run through a sequence of intake and discharge modes ensuring maximum bowl rinse, bowl re-fills to leave water in the bow Water Saver - starts a timed flush using half of the water of a normal flush. Bowl refills to leave water in the bowl. Water Only - adds additional water to the bowl without discharging any of the contents of the bowl. Allows the user to wet the bowl prior to use or fill the bowl to a certain level to minimize water usage. Empty Only - allows the user to evacuate the bowl while using no water. While the button is pressed the discharge pump will run, when released the pump stops. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

i50 SeaTalkng Instruments - Tridata with Thru-Hull Transducer The i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays. For the ultimate in flexibility, the i50 Instruments support SeaTalkng CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of the i50 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument has a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i50 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase. i50 Tridata Instrument  The i50 Tridata is a convenient 3-line instrument that combines the Speed and Depth Instruments functions into one display. This makes the i50 Tridata ideal for installations on helms where space is a premium or as a depth and speed repeater solution for other locations on the boat. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Use a primary display or as a repeater of i50 depth and speed instruments Built-in depth and speed transducer connections M78713-PZ Nylon Depth Transducer with 45ft cable E70673 ST900/P120 S/T Thru Hull - 13.7m Cable The i50 Tridata's 3-line LCD can show current depth, current speed, distance log, trip log, and water temperature. Additional display modes include maximum speed, average speed, and VMG to windward. Tridats have a count-up timer and 2 race start timers for racers. Tridata's robust alarm functions include a shallow depth alarm, deep depth alarm, shallow anchor alarm, and deep anchor alarm. Features: Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems. Large, crisp LCDs with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70, and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

SystemPod Pre-Cut for Raymarine Axiom 12 & Axiom+ 12 on Right & 2 Additional Instruments (3.6″ holes) on Left for 9.5″ Wide Guard  GP1080-15 for Sail: SystemPod Pre-Cut for Raymarine Axiom 12 / Axiom+ 12 on the right AND 2 additional instruments (3.6″ holes) on the left for 9.5″ wide guard (Pre-Cut is for Surface Mount using the rear mounting brackets) SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. This SystemPod for Power can be dash mounted using the SK135 Stanchion Kit, or overhead mounted using the SK130 Stanchion Kit. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.