**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click here to download form. V3100 Class B AIS The V3100 Class B AIS incorporates SOTDMA technology and increased transmission power to enhance transmission frequency, reliability, and range compared to standard Class B AIS. This ‘black-box’ solution integrates with Simrad displays, and features industry-standard connectivity. Increased Transmission Frequency and Reliability The V3100 Class B AIS incorporates the same SOTDMA technology found in Class A solutions. This self-organizing transmission technology allows the system to negotiate a regular transmission timeslot with other AIS units in range, facilitating more frequent and reliable position updates in high-traffic areas. The V3100 transmits updates, based on vessel speed, up to once every five seconds; this provides up to six times the reporting frequency of standard Class B AIS. Increased Transmission Range The V3100 features a maximum transmission power of 5 Watts, 2.5 times the transmission power of standard Class B AIS solutions. This allows vessels equipped with the V3100 to be detected over AIS at a greater range and provides more reliable transmission to satellite-based AIS receivers. Integrated ‘Black-Box’ Solution This ‘black box’ AIS solution is designed to work with Simrad multifunction displays, and other NMEA 2000® or NMEA 0183® connected marine electronics. Output to a standard PC is also supported via USB connectivity. The V3100 is contained in a compact IP67 water-resistant housing and includes a built-in SD card slot for standalone AIS data logging. Features: Enhanced performance compared to standard Class B AIS Transmit over greater distances with 5-watt output power Transmit more frequent position updates with SOTDMA Greater transmission reliability in high-traffic areas Integrated ‘black-box’ solution NMEA 2000®, dual NMEA 0183®, and USB connectivity IP67 water-resistant housing Built-in SD card slot for AIS data logging This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

AIS700 Class B AIS Transceiver with Antenna Splitter **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click here to download form. The AIS700 from Raymarine is a Class B Automatic Identification System (AIS) transceiver designed for use with Raymarine multifunction navigation display systems.  AIS is an international marine navigation safety system that allows participating vessels to silently exchange key navigation information including vessel name, identification, course, speed and more.  AIS contacts can be displayed on Raymarine multifunction displays, chartplotters, radar displays and select instruments.  As a Class B AIS transceiver, the AIS700 not only receives broadcasts from other vessels, it also transmits your own boat’s information too helping you to be seen on other vessels’ systems. The AIS700 is engineered using the very latest SO-TDMA (Self Organized Time Division Multiple Access) networking technology which allows it to perform faster and at longer ranges than d speed over previous generation AIS products.  For ease-of-installation, the AIS700 has a built in VHF-band antenna splitter which allows it to share a single antenna with your current VHF radio.  AIS700 also has its own internal, dedicated 72-channel GPS receiver with external antenna as required by international standards.   AIS700 also supports both hardware and software-enabled Silent Mode.  This allows you to temporarily restrict broadcasting your vessels own data, while continuing to receive updates from surrounding traffic.  Silent Mode can be particularly useful when transiting waters where extra security is a concern, or even in competitive tournament scenarios when you might want to prevent other from finding out the location of the hot bite.  Normal AIS safety broadcasts can be easily reinstated with a few simple touches of the AIS controls in your Raymarine MFD, or with the flip of a switch for hardware-silenced systems. The AIS700 is super-compact for easy mounting inside your helm, in a service locker, or other out-of-the-way location.  It can connect to your other onboard electronics using the latest NMEA2000 networking.  AIS700 also has a built-in NMEA0183 multiplexer to assist in connecting it to older MFD’s and VHF radio systems.  AIS700 also has a built-in USB 2.0 connection that can be used to tie the transceiver into a computer or laptop running AIS compatible navigation software.  AIS700 has a Secure Digital (SD) memory slot that can be fitted with an owner-suppled flash memory card for continuous recording of the AIS data stream.   Features: Full transmit and receive AIS for enhanced situational awareness and safety Latest SO-TDMA networking for longer range and faster performance Built-in antenna splitter simplifies installation with existing VHF radio antenna NMEA2000, NMEA0183, PC and SeaTalkng Compatible Software or hardware switchable Silent Mode for enhanced security when needed In the Box AIS700 Class B AIS Transceiver with built-in VHF antenna splitter GNSS (GPS) Antenna, gasket and pole mount kit Power and data cable (2 meters) VHF Radio antenna interconnect cable (1 meter) DeviceNet to SeaTalk NG Cable (1 meter) Mounting Hardware Pro-AIS Programming Software CD-ROM Documentation kit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

RS100-B Black Box VHF Radio with Class B AIS & GPS Antenna Navigate safely with the Simrad RS100-B VHF marine radio - integrated with a Class-B AIS transceiver and GPS. Stay connected from anywhere on your vessel with up to eight handsets (four wired and four wireless) and four external speakers. An external GPS-500 delivers advanced AIS functionality. Complete visibility with integrated AIS The RS100-B system features a Class-B AIS receiver and transmitter, so not only is your boat's position identifiable to nearby AIS-enabled vessels but theirs are also visible to you. The integrated AIS receiver is a valuable aid to help avoid collisions in crowded harbours and waterways. It monitors the location of all nearby AIS-enabled vessels, providing real-time information in any weather condition, night and day. AIS information can be viewed directly on the radio's screen or via a compatible multifunction device, as an overlay on a chart or radar screen. A modular system to fit any boat The RS100-B is a modular VHF system that's expandable and customisable to suit any boat and any on-water communication needs. The standard package includes one wired handset and one external speaker. This setup is expandable up to eight handsets (four wired and four wireless) and four external speakers - ideal for use as an on-board intercom with Simrad HS40 wireless or HS100 wired handsets. The wireless handsets duplicate the radio display and controls on easy-to-read screens viewable under all lighting conditions, even bright sunlight.  All primary functions are accessible from the handset with channel scan and favourites, alphanumeric keypad, clear audio, handset station naming and 60-second audio rewind. Features: Integrated Class-B AIS transmitter and receiver Bundled with dedicated GPS receiver, GPS-500 for AIS transmission Class D DSC approved VHF radio Connect up to four wireless and four wired handsets Add an optional loudhailer and up to four external speakers NMEA 0183® and NMEA 2000® connectivity 60-second audio rewind Configurable external speakers with volume offsetting Handset backlight settings can be grouped with NMEA 2000® backlight groups so MFD’s and VHF Radios can have backlight controlled together Track Buddy – track up to five “buddies” using their VHF MMSI

RS40-B VHF Radio with Class B AIS Transceiver & Internal GPS See and Be Seen with Integrated AIS The RS40-B includes a Class B AIS transceiver, which not only receives AIS targets but also transmits your boat's position to nearby AIS-equipped vessels. This helps other mariners to spot your boat through any conditions, day or night. A built-in AIS receiver monitors the position of other AIS-equipped vessels, helping you to proactively avoid collisions in crowded harbors and waterways. AIS information can be viewed on the radio’s built-in screen or overlaid on your chart or radar screen through a compatible multifunction display. Removable Fist Mic The RS40-B's removable fist mic can be connected to the front or rear of the radio, and optional extension cables allow the mic and radio to be mounted separately. This offers a simple and cost-effective solution for any mounting location, with no cable clutter. For example, the RS40-B can be mounted overhead, with no hanging cables, while the mic is connected to an extension socket on the dash below. Expandable with Wireless Handsets Add an optional HS40 wireless handset to take your radio anywhere on board. Each handset duplicates your radio's display and controls, enabling remote access to all key functions. Up to two handsets can be connected to a single RS40-B, and with multiple handsets connected your radio doubles as an on-board intercom. Features: Integrated Class B AIS transceiver Class D DSC-approved VHF radio Integrated GPS receiver Removable fist mic supports front or rear connection Connect up to two wireless handsets Add an optional loudhailer or external speaker NMEA 0183® and NMEA 2000® connectivity Unit Dimensions 7.92" wide x 3.85 High Flush mounted In the Box: 000-14921-001 Fist Mic RS40 000-14917-001 Mounting Bracket with Knobs 000-14915-001 Flush Mounting Kit 000-14912-001 Suncover

RS40-B VHF Radio with Class B AIS Receiver & GPS-500 GPS Antenna See and Be Seen with Integrated AIS The RS40-B includes a Class B AIS transceiver, which not only receives AIS targets but also transmits your boat's position to nearby AIS-equipped vessels. This helps other mariners to spot your boat through any conditions, day or night. A built-in AIS receiver monitors the position of other AIS-equipped vessels, helping you to proactively avoid collisions in crowded harbors and waterways. AIS information can be viewed on the radio’s built-in screen or overlaid on your chart or radar screen through a compatible multifunction display. Removable Fist Mic The RS40-B's removable fist mic can be connected to the front or rear of the radio, and optional extension cables allow the mic and radio to be mounted separately. This offers a simple and cost-effective solution for any mounting location, with no cable clutter. For example, the RS40-B can be mounted overhead, with no hanging cables, while the mic is connected to an extension socket on the dash below. Expandable with Wireless Handsets Add an optional HS40 wireless handset to take your radio anywhere on board. Each handset duplicates your radio's display and controls, enabling remote access to all key functions. Up to two handsets can be connected to a single RS40-B, and with multiple handsets connected your radio doubles as an on-board intercom. Features: Integrated Class B AIS transceiver Class D DSC-approved VHF radio Integrated GPS receiver Removable fist mic supports front or rear connection Connect up to two wireless handsets Add an optional loudhailer or external speaker NMEA 0183® and NMEA 2000® connectivity Includes GPS-500 for enhanced performance Unit Dimensions 7.92" wide x 3.85 High Flush mounted In the Box: 000-13613-001 GPS-500  GPS Antenna 000-14921-001 Fist Mic RS40 000-14917-001 Mounting Bracket with Knobs 000-14915-001 Flush Mounting Kit 000-14912-001 Suncover

AIT1500 Class B AIS Transponder w/Built-In GPS **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click to download form. Designed specifically to bring the benefits of Class B AIS to smaller vessels, it uses a high sensitivity internal GPS antenna to save on space and cut down on installation time. Simply connect to power and a plotter, plug in a VHF antenna and you're in business. The regulations for AIS demand that the Class B transponder has to incorporate itsown GPS positioning receiver which normally involves fitting an external antenna. TheAIT1500 incorporates a high sensitivity GPS antenna within its compact case whichsaves on antenna clutter and makes for a speedy installation. It's ideal for fitting onsmaller vessels and tenders. It uses a NMEA0183 interface for simple connectionto the vast majority of AIS compatible chart plotters and also has a separate 4800baud GPS data output for the DSC VHF if required. It consumes less that 2W powerand can operate on 12/24V systems. It also features a silence capability so the AIStransmissions can be muted while continuing to receive AIS traffic. There is a USB interface for programming as well as for PC/MAC based navigation.It's compatible with Digital Yacht's NavLink MAC app and SmarterTrack PC navigationsystem. GPS signals will pass through plastic, glass and GRP so it will be able to be mountedbelow decks on many boats. A dedicated VHF antenna is required for the AIS or asuitable VHF-AIS antenna splitter such as the SPL2000. It can also connect to theWLN10. Features: Advanced AIS design for the best performance Waterproof compact enclosure Built in internal GPS antenna Dual NMEA 0183 outputs at 4800/38400 baud USB interface PC & MAC programming software included NMEA input multiplex function Silence switch option Supplied with programming and utilities CD This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B200 Class B AIS Transceiver - 5W SOTDMA with Battery Backup **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click here to download form. The em-trak B200 is a high transmit power (5W) priority AIS Class B transceiver specifically designed for serious ocean sailors, offering enhanced safety through maximum range and transmission priority. The high-powered, advanced AIS engine provides the reliability you can depend on and the very best AIS performance in its class. Completely water and weatherproof (IPx6 & IPx7 certified), and ruggedized to withstand shock and vibration, the B200 has been extensively tested in the most extreme marine environments and will provide years of maintenance-free operation. The dual NMEA2000 & 0183, coupled with serial ports, USB, Wi-Fi, and Bluetooth also make connecting to all your tablets, PCs, display, and navigation devices easy and simple. Peace of mind is further enhanced with an internal battery that ensures continuous operation for up to 120 hours in the event of total power loss. The B200 also supports silent mode, where transmissions are switched off, but receiving continues, and can be enabled through the integrated switch. Features: Certified AIS Class B – 5W SOTDMA Ruggedized and impervious to extreme environments – water (IPx6, IPx7), damp, shock, vibration, temperatures Internal battery back-up for up to 120hrs operation – charge is automatically maintained by primary vessel power and automatically switches to the battery if lost Wi-Fi & Bluetooth wireless connectivity High performance latest generation GPS NMEA0183 & NMEA2000 Low power consumption Anti-tamper protection Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Physical & Environmental Specifications: Size (w x h x d): 170 x 140 x 69mm Weight: 695g Operating temperature: –25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection – IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V – 31.2V DC Average current (at 12V): 240mA (1.6A when battery charging) Peak current: 3.85A Average power consumption (at 12V): 2.9W (19.2W when battery charging) Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Battery Capacity: 4600mAh Battery Type: 3.7V Li-Ion rechargeable Battery life (default operating conditions): 48 hours Connectors: VHF antenna: SO-239 GNSS: TNC Power: 2-way circular multipole NMEA 0183/silent mode: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data Wi-Fi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode) Bluetooth: BT Classic 4.0, 7 concurrent connections Standards Compliance: AIS standards: IEC 62287-2 Ed. 2.  ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0.  IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0. IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: External only Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: SOTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 5W (+37dBm) User Interface: Buttons: Integrated silent mode Indicators: Power, transmit timeout, error, silent mode GNSS antenna Size: 85 x 70mm Weight: 470g Ingress Protection: IPx6 and IPx7 Mounting: 1 inch 14 TPI pole mount required GNSS systems supported: GPS, GLONASS, Galileo, BeiDou In the Box: 1 x AIS transceiver 2 x Anti-tamper locking plates 1 x Power cable (2M) 1 x Fixing pack 1 x Anti-tamper bracket 1 x Mounting template

**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click here to download form. MDA-5 Hi-Power 5W SOTDMA Class B AIS Transceiver w/Built-In Antenna Splitter & Long Range Wi-Fi Features: The MDA-5 is the world's most sophisticated fully certified 5-Watt SOTDMA Class B AIS Moble on the market 5-Watt transmitter power, Higher Output power means your vessel will be seen at longer ranges by other vessels and via AIS websites SOTDMA Class A Priorities means that your vessel will always transmit and be seen in very congested Commercial Harbors and Ports where traditional Class B units don"t have network priority. Intergrated zero loss VHF antenna splitter - no second antenna needed Built-In 802.11 b/g/n Long Range WIFI allows unit to send AIS and Position data to any WIFI connected devices NMEA-0183 data port, NMEA-2000 & USB intelligent connectivity to all bridge systems Built-In GPS & GLONASS satellite navigation receiver Water Proof certified to IPX7 Dual Receivers decodes all DSC & AIS messages, including MOB & SART Ultra-power efficient IEC-62287-2, FCC and USCG certified 2 Year Warranty Package Includes: Commercial Grade External GPS Antenna with Coax Cable Mounting hardware Power & Data Interface cable VHF Radio Connection cable Product Information DVD, with ProAis2 Software for Programming & Troubleshooting User Manual & Quick Start Guide Specifications: Transmitter Output Power: 5 Watts VHF Antenna Connector SO-239 UHF GPS Antenna Connector TNC Frequency Range: 156.025-162.025 Mhz Input Voltage: 9.6-31.2 VDC Current Draw: 220mA average power consumption Operating Temperature Range: -25C to +55xC Ingress Protection: IP67 Dimensions (transceiver): 6.8" W x 5.0" H x 2.0" D Weight 0.8 lbs. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MDA-5H Hi-Power 5W SOTDMA Class B AIS Transceiver with Built-In Antenna Splitter (without Wi-Fi) **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click here to download form. MDA-5 Hi-Power 5W SOTDMA Class B AIS Transceiver w/Built-In Antenna Splitter (Without WiFi) Features: The MDA-5 is the world's most sophisticated fully certified 5-Watt SOTDMA Class B AIS Mobile on the market 5-Watt transmitter power, Higher Output power means your vessel will be seen at longer ranges by other vessels and via AIS websites SOTDMA Class A Priorities means that your vessel will always transmit and be seen in very congested Commercial Harbors and Ports where traditional Class B units don't have network priority. Integrated zero loss VHF antenna splitter - no second antenna needed NMEA-0183 data port, NMEA-2000 & USB intelligent connectivity to all bridge systems Built-In GPS & GLONASS satellite navigation receiver Water Proof certified to IPX7 Dual Receivers decodes all DSC & AIS messages, including MOB & SART Ultra-power efficient IEC-62287-2, FCC, and USCG certified 2 Year Warranty Package Includes: Commercial Grade External GPS Antenna with Coax Cable Mounting hardware Power & Data Interface cable VHF Radio Connection cable Product Information DVD, with ProAis2 Software for Programming & Troubleshooting User Manual & Quick Start Guide Specifications: Transmitter Output Power: 5 Watts VHF Antenna Connector SO-239 UHF GPS Antenna Connector TNC Frequency Range: 156.025-162.025 Mhz Input Voltage: 9.6-31.2 VDC Current Draw: 220mA average power consumption Operating Temperature Range: -25C to +55xC Ingress Protection: IP67 Dimensions (transceiver): 6.8" W x 5.0" H x 2.0" D Weight 0.8 lbs.

AIT1500 NMEA2000 Class B AIS **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click to download form. "An easy to install Class B AIS transponder with plug 'n play NMEA 2000 interface. Built in GPS antenna and ideal for use on smaller yachts and boats like RIBs and center consoles." The AIT1500N2K is a Class B AIS transponder with built in GPS antenna to make installation as easy as possible. The super sensitive design allows below deck mounting on GRP boats such as small yachts, RIBs and center consoles and cuts down on antenna clutter. It connects to your boat's electronics via a plug 'n play NMEA 2000 connection and power is also taken from the NMEA 2000 backbone. Simply connect a VHF antenna (or use our SPL2000 AIS-VHF antenna splitter) and you're equipped with Class B AIS.  Once installed, your AIS compatible plotter will show an overlay of targets and you'll transmit your position every 30 seconds when underway to other AIS users. There's also a USB interface for PC/MAC connectivity which can be used for programming the transponder with your boat details.  The AIT1500N2K features a waterproof and tough enclosure with 4 LED indicators to show the status of the transponder.  Features:  Shares the same latest generation AIS technology as our AIT2000 and AIT3000 units  Plug and Play NMEA2000 interface (takes power from network) Compatible with all AIS ready chart plotters Internal GPS antenna for easy installation on fibreglass (GRP) hulled boats Built-in high performance 50 channel GPS receiver (ideal also as a backup GPS) USB Interface for simple plug and play connection to a PC or Mac Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter (SPL2000) Supplied with programming software for PC/Mac and SmarterTrack Lite for Windows Easy to install black box solution NOTE - AIS target range, like VHF range is dependent upon a number of installation factors such as; antenna gain, antenna height and size of ground plane. Ranges in excess of 20 miles should be possible if all of these factors are perfect. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B923 Class B AIS Transceiver with VHF Splitter - 2W CSTDMA **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click here to download form. Get the most from your on-the-water experience with the B923, a 2W CSTDMA AIS Class B transceiver. Small and lightweight, it delivers em-trak's advanced AIS performance to ensure you see all information and targets, even at maximum range, and with the lowest power consumption in its class. The B923 is equipped with an integrated VHF antenna splitter, which enables your transceiver to share your existing VHF antenna without any loss of performance. It offers quick and simple installation, with built-in intelligent connectivity, including an integrated next-generation GPS receiver and antenna and em-trak's unique FLEXI-FIT® bracket system to get you up and running in no time at all. The dual NMEA2000 & 0183, coupled with serial ports, USB, optional Wi-Fi, and Bluetooth also make connecting to all your tablets, PCs, display, and navigation devices easy and simple. Features: Certified AIS Class B – 2W CSTDMA Integrated VHF antenna splitter Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock, and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any chart plotter or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Fail-safe VHF radio operation Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 415kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 245mA Peak current: 2A Average power consumption (at 12V): 2.9 W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 VHF radio: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data Standards Compliance: AIS standards: IEC 62287-1 Ed. 3, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: CSTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 2W (+33dBm) User Interface: Indicators: Power, transmit timeout, error, silent mode In the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape

SAS-300 AIS Class B AIS Transceiver with Internal GPS Antenna Features: 6.5" High-Resolution color TFT display with 740 x 480 pixels Track AIS targets on standard "radar" display, over included worldwide base charts or (with optional SD Card) overlaid onto full C-MAP MAX cartography Advanced Rmax™ technology maximizes receive/transmit range, and ensures that all available AIS messages are received and decoded in real-time Track up to five vessels with track history and optional live details on individual vessels The large display allows easy viewing of all vessels with name, MMSI, range/bearing, and full details on each vessel Instant "Go To" function Full control pad with dedicated function keys for easy operation Easy-to-use alarms for Closest Point of Approach (CPA) and Time to Closest Point of Approach (TCPA) Sort different types of vessels by color and different types of transmission by an on-screen icon Displays the Following Information: Class A vessels Class B vessels Base Stations Aids to Navigation AIS SARTs Search & Rescue What's in the box? Class B Transceiver Power Data Cable A packet of 4 screws Bracket Product CD Quick Start Guide Product Manual Warranty Info This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

B922 Class B AIS Transceiver with WiFi & Bluetooth Wireless Connectivity - 2W CSTDMA **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click here to download form. The B922 is a 2W CSTDMA Class B AIS transceiver, offering unmatched performance and ultra-low power consumption through em-trak's advanced technology. Small and lightweight, it combines integrated WiFi & Bluetooth capabilities for seamless wireless connectivity and AIS data streaming, compatible with any mobile device or PC. Its flexible connectivity means it can be used by up to nine different devices simultaneously, ensuring everyone on board gets the most from your transceiver and related onboard equipment every day. The B922 transceiver also works seamlessly with em-trak's CONNECT-AIS app to make programming, configuration, and device monitoring easier than ever before. Like all products in the class-leading B900 range, the B922 is engineered to deliver real-time data processing, even at the range limit. It is easy to install with em-trak's unique FLEXI-FIT 'no screw' bracket system, and will operate without maintenance for years to come. Features: Certified AIS Class B – 2W CSTDMA Integrated WiFi and Bluetooth Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock, and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any app, chart plotter, smartphone, tablet, or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 385kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 170mA Average current (at 12V) (wireless off): 135mA Peak current: 2A Average power consumption (at 12V): 2.0 W Average power consumption (at 12V) (wireless off): 1.6W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data WiFi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode) Bluetooth: BT Classic 4.0, 7 concurrent connections Standards Compliance: AIS standards: IEC 62287-1 Ed. 3, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: CSTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 2W (+33dBm) User Interface: Indicators: Power, transmit timeout, error, silent mode In the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape

B924 Class B AIS Transceiver with WiFi, Bluetooth & VHF Antenna Splitter - 2W CSTDMA **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click here to download form. The most feature-rich 2W CSTDMA AIS transceiver in the B900 range. The B924 includes WiFi & Bluetooth for seamless wireless connectivity and AIS data streaming to any mobile device, PC, or wearable, with an integrated VHF antenna splitter to enable your transceiver to share your existing VHF antenna without any loss of performance. Like all B900 transceivers, it also includes an integrated next-generation GPS receiver and antenna and is designed for em-trak's unique FLEXI-FIT® bracket system to make installation as easy as possible. Exceptionally lightweight and completely weatherproof, the B924 delivers the very best (2W) AIS receive and transmit performance, so you see all AIS information and targets, even at maximum range. Your transceiver will also work with our CONNECT-AIS mobile phone app to make programming, configuration, and transceiver health monitoring simple and convenient. Features: Certified AIS Class B – 2W CSTDMA Integrated WiFi and Bluetooth Integrated VHF antenna splitter Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock, and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any app, chart plotter, smartphone, tablet, or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 425kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 280mA Average current (at 12V) (wireless off): 245mA Peak current: 2A Average power consumption (at 12V): 3.4W Average power consumption (at 12V) (wireless off): 2.9W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 VHF radio: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data WiFi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode) Bluetooth: BT Classic 4.0, 7 concurrent connections Standards Compliance: AIS standards: IEC 62287-1 Ed. 3, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0, IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: CSTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 2W (+33dBm) User Interface: Indicators: Power, transmit timeout, error, silent mode In the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x VHF radio accessory cable 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape

B952 Class B AIS Transceiver - 5W SOTDMA - WiFi & Bluetooth **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at the time of purchase. A copy of the MMSI registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form.** Click here to download form. The B952 is a high-power (5W SOTDMA) Class B AIS transceiver, offering unmatched performance and ultra-low power consumption. Small and lightweight, it combines integrated Wi-Fi & Bluetooth capabilities for seamless wireless connectivity and AIS data streaming. It is compatible with any mobile device, PC, or wearable – ensuring everyone on board gets the most from your transceiver and related onboard equipment every day. The B952 transceiver works seamlessly with em-trak's CONNECT-AIS app to make programming, configuration, and device monitoring easier than ever before. The class-leading device is engineered to deliver real-time data processing, with increased range and transmission priority and its flexible connectivity means it can be used by up to nine different devices simultaneously. em-trak's next-gen technology means the B952 is delivered within a compact, easy-to-install, rugged package designed and manufactured to operate reliably without maintenance in the harshest marine environments. Features: Certified AIS Class B – 5W SOTDMA Integrated WiFi & Bluetooth Global certification - USCG / FCC / Canada / Europe SRT-AIS™ Transceiver Engine for superlative proven performance FLEXI-FIT™ bracket system for easy, convenient, and secure installation Internal high-performance GPS receiver and antenna (external antenna optional) Water, pressure spray, and damp proof (IPx6, IPx7 certified) Protected from vibration, shock and extreme temperatures Small and lightweight Ultra-low power consumption – best in class Guaranteed connectivity and interoperability with any app, chart plotter, smart phone, tablet or PC NMEA 0183 & NMEA 2000 Automated health and performance monitoring Silent mode (transmit-off) function Enhanced RF screening to protect against electromagnetic interference Built-in power surge protection Physical & Environmental Specifications: Size (H x W x D): 150 x 115 x 45mm Weight: 385kg Operating temperature: -25°C to +55°C Storage temperature: -25°C to +70°C Ingress protection: IPx6 and IPx7 Electrical Specifications: Supply voltage: 12V or 24V DC Supply voltage range: 9.6V - 31.2V DC Average current (at 12V): 170mA Average current (at 12V) (wireless off): 135mA Peak current: 2.5A Average power consumption (at 12V): 2.0W Average power consumption (at 12V) (wireless off): 1.6W Galvanic isolation: NMEA 0183 inputs only, NMEA 2000, VHF antenna port Connectors: VHF antenna: SO-239 GNSS: TNC Power: 12-way circular multipole NMEA 2000: 5-way Micro-C connector USB: USB Micro-B Data Interfaces: NMEA 0183: 2 x bi-directional ports NMEA 2000: NMEA 2000 Ed 3.101, LEN=1 USB: PC virtual com port for NMEA 0183 data WiFi: IEEE 802.11 (a/b/g), client and access point mode supported (2 connections in access point mode) Bluetooth: BT Classic 4.0, 7 concurrent connections Standards Compliance: AIS standards: IEC 62287-2 Ed. 2, ITU-R M.1371.5 Product safety standards: EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013 EN62311:2008 Environmental standards: IEC 60945 Ed. 4 Serial data interface standards: IEC 61162-1 Ed 5.0, IEC 61162-2 Ed 1.0 NMEA 2000: NMEA 2000 Ed 3.101 GNSS performance standards: IEC 61108-1 Ed 2.0,  IEC 61108-02 Ed 1.0 GNSS: Systems supported: GPS, GLONASS, BeiDou, Galileo (two of any combination, three including GPS, Galileo) Channels: 72 Internal/external antenna: Internal or optional external antenna Time to first fix from the cold start: 26s VHF Transceiver: VDL access scheme: SOTDMA Operating frequency: 156.025MHz - 162.025MHz Channel bandwidth: 25kHz Receivers/transmitters: 2 x receivers, 1 x transmitter AIS receiver sensitivity (20% PER): -111dBm AIS transmitter power: 5W (+37dBm) User Interface: Indicators: Power, transmit timeout, error, silent mode In the Box: 1 x AIS transceiver 1 x Power and data cable (2M) 1 x FLEXI-FIT™ mounting bracket Complete with screws & optional fixing tape