|
Wastewater Level Sender
Voltage: 12-24V
Length: 80-600mm
4-20mA
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
179.99 |
|
|
Marine Navigation & Instruments, Supplies and Equipment
With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.
Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.
|
|
|
i50 SeaTalkng Instruments - Tridata with Thru-Hull Transducer
The i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays.
For the ultimate in flexibility, the i50 Instruments support SeaTalkng CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours.
The ultra-sleek design of the i50 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument has a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.
i50 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase.
i50 Tridata Instrument
The i50 Tridata is a convenient 3-line instrument that combines the Speed and Depth Instruments functions into one display. This makes the i50 Tridata ideal for installations on helms where space is a premium or as a depth and speed repeater solution for other locations on the boat.
Red backlighting for outstanding night-time visibility.
SeaTalkng and SeaTalk-1 connectivity for maximum flexibility
Use a primary display or as a repeater of i50 depth and speed instruments
Built-in depth and speed transducer connections
M78713-PZ Nylon Depth Transducer with 45ft cable
E70673 ST900/P120 S/T Thru Hull - 13.7m Cable
The i50 Tridata's 3-line LCD can show current depth, current speed, distance log, trip log, and water temperature. Additional display modes include maximum speed, average speed, and VMG to windward. Tridats have a count-up timer and 2 race start timers for racers. Tridata's robust alarm functions include a shallow depth alarm, deep depth alarm, shallow anchor alarm, and deep anchor alarm.
Features:
Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems.
Large, crisp LCDs with high contrast for excellent visibility.
Red backlighting for outstanding night-time visibility.
SeaTalkng and SeaTalk-1 Networking for maximum flexibility.
Fully compatible with i70, p70, and p70R Color Instruments and Autopilots.
110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy
|
884.99 |
|
|
Fuel Level Sender (American 12-24") (Single)
Features:
American 12-24"
Single
Includes hardware
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
59.03 |
|
|
Fuel Level Sender Hi-Q 6-24" 5-Hole - 2 Wire
5-hole flange, adjustable for left or right arm movements and various tank depths.
Features:
Tank depths from 6 inches to 24 inches
240-33 ohm senders
|
48.19 |
|
|
Deep-Pipe Level Sender - 150mm - 0 to 180 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 150 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 0 to 180 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
30.54 |
|
|
Deep-Pipe Level Sender - 600mm - 0 to 180 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 600 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 0 to 180 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
55.16 |
|
|
Deep-Pipe Level Sender - 160mm - 0 to 180 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 160 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 0 to 180 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
31.16 |
|
|
Deep-Pipe Level Sender - 170mm - 0 to 180 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 170 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 0 to 180 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
31.79 |
|
|
Deep-Pipe Level Sender - 180mm - 0 to 180 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 180 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 0 to 180 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
31.79 |
|
|
Deep-Pipe Level Sender - 190mm - 0 to 180 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 190 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 0 to 180 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
31.79 |
|
|
Deep-Pipe Level Sender - 200mm - 0 to 180 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 200 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 0 to 180 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
21.59 |
|
|
Deep-Pipe Level Sender - 210mm - 0 to 180 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 210 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 0 to 180 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
33.19 |
|
|
Deep-Pipe Level Sender - 220mm - 0 to 180 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 220 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 0 to 180 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
33.82 |
|
|
Deep-Pipe Level Sender - 230mm - 0 to 180 OHM
Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state.
Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted.
Features:
Tubular Sensor Stainless Steel
Suitable for Fuel (Oi -Petroleum-Diesel-Gasoline) and Water
Length: 230 mm
Technical Specifications:
TE Superseal Connector 2-Pole IP67
Operating Temp.: -25°C to 65°C or -13°F to 149°F
Operating Voltage: 6 to 24 VDC
Compensation chamber
Flange: 5-Hole SAE Flange 54mm PA66 GF30
Wiring harness with length of 200 mm
Signal ranges: 0 to 180 OHM
IP67 protection rating
Communication: Analog
In the Box:
Deep-Pipe Level Sensor
Installation Kit
Safety Instructions
Installation Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
34.44 |
|