|
Transducer Extension Cable, 5 meter
Adds 5 meters of length to the stock transducer cable.
Works with the L755, L760, L770, L1250, L1260, and DSM compatible systems.
|
117.60 |
|
|
Marine Navigation & Instruments, Supplies and Equipment
With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.
Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.
|
|
|
RealVision 3D Transducer Extension Cable - 5M(16')
RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run.
|
127.82 |
|
|
CP470/CP570 Transducer Extension Cable - 5M
Raymarine's 5M transducer extension cable specifically for CP470 and CP570.
|
81.80 |
|
|
Transducer Extension Cable - 4m
Adds 4 meters of length to the transducer cable.
Used with the CPT-60 Dragonfly transducer. For maximum performance, Dragonfly is supplied complete with Raymarine's exclusive CPT-60 dual element CHIRP transducer.
|
35.78 |
|
|
Transducer Extension Cable for CP470/CP570 Wide CHIRP Transducers - 10M
Features:
Speed, Depth and Temperature
10M
Specifically for Raymarine's CP470 and CP570 Wide CHIRP Transducers
|
129.98 |
|
|
Transducer Extension Cable for CP470/CP570 Wide CHIRP Transducers - 3M
Features:
Speed, Depth and Temperature
3M
Specifically for Raymarine's CP470 and CP570 Wide CHIRP Transducers
|
61.36 |
|
|
GEONAV SXT5 NMEA 0183 - RS232 EXTENSION CABLE 5M
GEONAV DC1 NMEA RS422 6 PIN CABLE 1M
GEONAV DCX5 NMEA RS422 6 PIN CABLE EXTENSION 5M
OTTERBOX COMMUTER SERIS BLACKBERRY CURVE 9350/9360 PNK
KVH DESTACKER SINGLE OUTPUT 01-0347
|
|
|
Handset Extension Cable for Ray60/70 - 5M
Raymarine's 5M Handset Extension Cable is used to extend the handset that is included with the Ray60 and Ray70 VHF Radios.
|
56.23 |
|
|
RealVision 3D Transducer Extension Cable - 3M(10')
RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run.
|
117.60 |
|
|
RealVision 3D Transducer Extension Cable - 8M(26')
RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two (2) extension cables in any given cable run.
|
199.42 |
|
|
4M Transducer Extension Cable f/CHIRP & DownVision™
Use Raymarine's 4 Meter extension cable when the transducer will not reach you CP100.
|
40.90 |
|
|
RVM-412 Stainless Steel Thru-Hull Pair, 12 Degree Deadrise & 10M Cable
The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 series also has a built-in fast-response water temperature sensor for quick, accurate readings.
The RVM-412 pairs feature titled offset sonar elements inside their surface mount housings. The tilted elements ensure the sonar's beam patterns are correctly aligned for maximum performance while eliminating the drag and turbulence associated with a fairing-blocked transducer installation. Bundled transducer pairs include a Y-Cable harness that internally joins the two transducers together and an 8-meter transducer extension cable.
The RVM-412 is a port and starboard transducer pair designed for boats with 5° to 15° of deadrise. Each transducer element is tilted at 12° to compensate for the hull deadrise.
*Works with Axiom 2 Pro RVM series, and RVM1600 Sounder Module
Features:
600-Watt traditional CHIRP
High-performance Down and SideVision ceramics
High-speed housing with isolation plate
10M Cable
RVM-412 port and starboard pair accommodates hulls with a deadrise between 5° and 15°
|
2399.99 |
|
|
RVM-420 Stainless Steel Thru-Hull Pair, 20 Degree Deadrise & 10M Cable
The RVM-400 series transducers feature DownVision™, SideVision™, 600-Watt High CHIRP, and 3D sonar capability. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes 3D sonar imagery, automatically compensating for vessel motion. The RVM-400 series also has a built-in fast-response water temperature sensor for quick, accurate readings.
The RVM-420 is a port and starboard transducer pair designed for boats with 15° to 25° of deadrise. Each transducer element is tilted at 20° to compensate for the hull deadrise.
The RVM-420 transducer pairs feature titled offset sonar elements inside their surface mount housings. The tilted elements ensure the sonar's beam patterns are correctly aligned for maximum performance while eliminating the drag and turbulence associated with a fairing-blocked transducer installation. Bundled transducer pairs include a Y-Cable harness that internally joins the two transducers together and an 8-meter transducer extension cable.
*Works with Axiom 2 Pro RVM series, and RVM1600 Sounder Module
Features:
600-Watt traditional CHIRP
High-performance Down and SideVision ceramics
High-speed housing with isolation plate
10M Cable
RVM-420 port and starboard pair accommodates hulls with a deadrise between 15° and 25°
|
2399.99 |
|
|
B175H-W 1KW Bronze Thru Hull 12° Tilted Element
Features:
Installation: Thru Hull
Material: Urethane
Power (RMS): 1kW
Max Depth(ft): 800
Frequency (KHz): 150-250
Records: Depth and Temperature
Approved Hull Material: Fiberglass/Wood
Cable Length (ft/M): 6ft/2M
Supported deadrise: 8-15° Deadrise
Additional Notes: All wide beam products come with a 2M pigtail off the transducer. Requires a Transducer Extension cable for a Complete Transducer Installation. 10M Extension Cable part number A80327 and A80328 Single B75/B175 operation cable.
|
1565.21 |
|