SeaTalk hs Network Cable, 20m Raymarine SeaTalk hs network cables provide waterproof, reliable, high-speed connections between E-Series components. Available in multiple lengths to simplify installation, the network cable locks positively into E-Series displays, switches and couplers. A 1.5 meter SeaTalk hs cable is supplied with each E80 and E120 display.

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

SeaTalk hs Network Cable, 10m Raymarine SeaTalk hs network cables provide waterproof, reliable, high-speed connections between E-Series components. Available in multiple lengths to simplify installation, the network cable locks positively into E-Series displays, switches and couplers. A 1.5 meter SeaTalk hs cable is supplied with each E80 and E120 display.

Axiom™ 12 - 12" MFD Chartplotter The Axiom™ is a powerful multifunction navigation system from Raymarine. The Axiom 12 features a 12-inch glass touchscreen display with Raymarine's powerful LightHouse 3 operating system and a supercharged quad-core processor. The Axiom 12 comes with a built-in GPS receiver.  Axiom 12 also works with wide array of raster and vector electronic charts from Navioncs, C-MAP and LightHouse Charts. Axiom 12 is expandable so its capabilities can grow as needed. It supports the full range of Raymarine accessories including Quantum radar, CHIRP Sonar, SiriusXM marine weather, audio integration, instruments, cameras, and Evolution autopilot. Axiom 12 also features standard Wi-Fi and Bluetooth connectivity so it can connect with the latest Raymarine apps for tablets and Smartphones. The Axiom 12 includes surface and trunnion mounting kits, mounting hardware, power/data cable, 1m SeaTalk hs network cable, NMEA2000 network adapter and installation instructions. Features: Rugged, All-Glass touch screen display delivers a big screen experience in a small footprint. Optically bonded for brighter colors, sharper contrast, and sunlight visibility LightHouse 3 OS is fast, fluid, and easy to learn. An uncluttered interface that is easily personalized for your style of navigating. Fast 10 Hz 72 Channel GPS/GLONASS Receiver for rapid position and heading updates and smooth on screen tracking. Support for the best charts from Navionics and LightHouse Raster and Vector Charts sourced from leading map makers like NV Digital, Blue Latitude, and more. Navigate Safely at Night with the optional FLIR M100 and M200 compact marine thermal cameras. Quantum CHIRP Radar Ready - Superior solid state CHIRP radar delivers no compromise performance on long and extremely short ranges. Marine Audio Control - Turn up the volume and control NMEA2000 compatible marine audio systems like Rockford Fosgate. Ready to Network with Raynet Ethernet and NMEA2000. Connect multiple Axiom displays or expand with Quantum, HD radar, IP cameras, engine gauges, autopilots, instruments, and more. Built-in Wi-Fi lets you to stream and control Axiom right from your smartphone or tablet. You can also sync Axiom's waypoints, routes, and charts with Navionics mobile apps.

The SeaTalkng Backbone kit contains everything you need to construct and wire a basic SeaTalkng navigation network backbone on board your vessel. The kit contains the following components: A06031 SeaTalkng Terminators (Qty. 2) A06037 Backbone Cable, 20m A06036 Backbone Cable, 5m (Qty. 2) A06028 T-Piece (Qty. 4) A06049 Network Power Cable 81300 SeaTalkng Reference Manual ST70 Displays, transducer pods, transducers and network spurs are not included.

SeaTalkhs Crossover Coupler For networking only two devices, choose the SeaTalkhs crossover coupler. The Raymarine SeaTalkhs Crossover coupler provides a secure, waterproof means to join together SeaTalkhs Ethernet cables with RJ45 male connections. The Crossover Coupler is also handy when adapting SeaTalkhs devices like radar scanners for direct-connection to new generation multifunction displays. Use it along with the A62360 RayNet to RJ45 adapter to create a direct-connect RayNet plug.

Raymarine SeaTalkng Starter Kit SeaTalkng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. The SeaTalk to SeaTalkng Starter Kit is the perfect way to get started with your SeaTalkng compatible Raymarine product. The 5-way connector forms the start of your SeaTalkng backbone and your SeaTalkng product is connected via a Spur Cable. What's in the kit? A06064: SeaTalkng 5-way Connector A06031: SeaTalkng Backbone Terminator (x2) A06040: SeaTalkng Spur Cable 3M A06049: SeaTalkng Power Cable

RayNet to Seatalkhs Socket Adapter Cable The Raynet (F) to SeaTalkhs (F) cable adapter allows you to fit the existing waterproof, locking SeaTalkhs cables used with G-Series, E-Wide and E-Classic MFDs to new generation RayNet multifunction displays. The adapter cable is 15" (400mm) long.

SeaTalkngT-Piece Connector. Used for connecting white SeaTalkng Spur Cables to Blue SeaTalkng Backbone Cables.

SeaTalkng Backbone Extender for extending blue SeaTalkng Backbone Cables.

SeaTalkng Terminators attach at each end of SeaTalk backbone. Two are required per system.

5-way SeaTalkng Connector used for connecting spurs to the backbone.

Raymarine In-Line Terminator In-Line SeaTalkng Terminator f/Long Cable Runs old part number a80001 , now its a06074

Network Cables and Modules

Raymarine i70s Sailing System Pack, Wind, Depth, Speed i70s Multi Display E70327 Maximum Visibility and Maximum Versatility The i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1_ display, the i70s is easy-to-customize with digital, analogue and graphical displays of depth, speed, wind and more. Add the i70s to your existing Raymarine instrument system or create a network of i70s displays and sensors, the choice is yours. Features: 4.1" super bright oversized LCD for maximum visibility All weather optically bonded display technology delivers brighter colors, sharper contrast, and a wide viewing angle Glass bridge industrial design compliments Raymarine eS and gS Series multifunction displays Simple user interface with sculpted rubber keypad for precise operation in all conditions Customizable data displays of depth, speed, wind and more SeaTalkng networking for seamless connectivity to Raymarine systems and NMEA2000* networks NMEA2000 connectivity* for engine, environment fuel and navigation data Convenient AIS repeater mode allows you to visually track nearby AIS targets Combine the i70s with the ITC-5 instrument transducer convertor and connect to analog depth, speed, and wind sensors Network the i70s with Airmar DST800 transducers and the new in-hull P70s smart transducer Supplied with both black (eS Series style) & (e Series style) gunmetal bezels and protective suncover *NMEA2000 certification pending. A DeviceNet to SeaTalknj adatop is required for connecting the i70s to NMEA2000 backbone. Intuitive LightHouse User Interface The i70s places frequently used navigation functions right at your fingertips. The LightHouse instrument interface is consistent with Raymarine LightHouse multifunction displays, so Raymarine MFD users will feel right at home with the i70s. Networking Raymarine i70s allows for connectivity to the following on board networks: First generation SeaTalk networks using a SeaTalk to SeaTalkng adapter cable Current generation SeaTalkng networks NMEA2000 networks using a SeaTalkng to DeviceNet adaptor In addition to flexible networking capability the i70s features user-selectable data sources, for integration with multi-sensor networks. AIS Repeater Display AIS targets from NMEA 2000 AIS receivers. View the closest 25 AIS-equipped vessels and select individual targets to obtain vessel information. iTC5 Transducer Converter E70010 The iTC5 Instrument Transducer Converter enables the use of common analog transducer signals with new digital instrument displays like Raymarine's i70 and ST70 Plus. The ultra-compact iTC5 has connections to host the five most common analog transducers; depth, speed/temperature, wind, compass and rudder. The iTC5 instantly converts these 5 analog signals to digital SeaTalkng protocol. In addition to providing analog-to-digital conversion, the iTC5 provides all of the necessary power and communications connections to the transducers. This greatly simplifies the installation of new systems, and also provides a simple and cost-effective means for owners of older analog instrument displays to upgrade to the latest digital display technology. The iTC5 eliminates the need for expensive "smart" transducers or individual instrument pods. Complete control for calibration and alarms is performed through the i70 or ST70 Plus instruments. The iTC5 connects to Raymarine's SeaTalkng network and works with most analog transducers from legacy Raymarine ST30, ST40, ST50, ST60, ST80 and ST290 series instruments. Additionally the iTC5 works with Raymarine fluxgate compass modules as well as rotary and linear rudder feedback transducers to support compass heading and rudder angle instruments. Features: All-in-one analog to digital converter for depth, speed/temperature, wind, compass and rudder transducers Outputs SeaTalkng and NMEA2000 data to digital instruments, MFDs and more Enables easy upgrade of legacy analog instrument displays without replacing transducers SeaTalkng network provides all necessary power and data connections Ideal for use with Raymarine i70 and ST70 Plus digital instrument systems Wind Vane E22078 Standard Forward Wind Transducer, Standard Length: 14 1/2" Includes 100ft. Cable. DST800 Nylon Thru hull A22154 Raymarine DST800 Nylon Thru Hull Transducer with Depth, Speed, and Temp for ST60, ITC-5 PACKAGE CONTAINS: 1ea E70327 i70s Instrument 1ea E70010 ITC-5 1ea A22154 DST800 Transducer 1ea E22078 Standard Wind Transducer 1ea A06031 Backbone Terminator 1ea A06074 Inline Terminator 1ea A06068 Backbone Cable 9M 1ea A06049 Power Cable