Furunos NX300 paperless Navtex receiver is the most economical way of monitoring navigational warnings, meteorological warnings, search and rescue information and other data for ships sailing within 200-400 n.m. of shore. Every incoming message is identified and new messages are read from the high-contrast 4.5" LCD display, no paper is required. However, you can print out the message via a PC. The NX300 consists of the compact, waterproof display and an H-Field Loop antenna. You can also use the NX300 as a nav repeater, by using its NMEA0183 port to connect it to your GPS or DGPS receiver. Standard Features Digital Navtex Receiver - No Paper Required 518 kHz Reception - 200-400nm Range From Coast Stationt 132 Message (Avg.) / 28,000 Character Memory Strorage Capacity Optimum Station Selection Based Upon Position (*L/L Required) GPS NMEA 0183 L/L Position / SOG / COG / BTW Data Repeater RS-232 Data Output To Personal Computer & Printer H-Field Antenna For Enhanced Reception (No Ground Required) 3 Modes: Message Selection, Message Display, Nav Data Display 15 Message Categories - User Selectable / Customized Low Power Consumption & Memory Back-Up w/Lithium Battery Shipping Information 11 Lbs., 1 Carton Power Requirements 12 - 24 VDC, 70 - 250 mA (3W Max.) Notes L/L Data Input Required This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

TZ Navigator Furuno Radar Module - Digital Download INTEGRATE TIMEZERO SOFTWARE WITH BEST-IN-CLASS FURUNO RADARS AND MFDS The Furuno Radar Plus Pack allows the user to make the most of compatible FURUNO radars and MFDs. Combine FURUNO hardware with TIMEZERO for a powerful navigation solution. The commercial-grade FAR 2xx7 series of radars can be integrated with TIMEZERO software, responding to professional user needs. Recreational users on the other hand, will be impressed by the advanced integration available with the acclaimed NavNet 3D and TZtouch MFDs. The FURUNO DRS (Digital Radar Sensors) that are on the NavNet network can be fully integrated with TIMEZERO software, enabling the display, control and overlay of the radar from within the software. TIMEZERO software connects to the NavNet network and receives navigation data directly from the network.Combining the NavNet and TIMEZERO software systems results in an extremely fast and user-friendly solution. Features: When the FURUNO Radar Plus Pack is added to your TIMEZERO software a range of functionalities are unlocked, between your FURUNO radar or MFD and software. TIMEZERO navigation software can be connected to a Furuno NavNet3D or TZtouch network allowing full control of the DRS radars (with an MFD present on the network). This means that you can display the radar image directly in TIMEZERO software, enjoy full control of the software from your software, and overlay the radar image on your charts. Radar overlay is an effective safety tool that allows you to understand your surroundings in relation to your current position. When TIMEZERO is connected to a NavNet3D network, the following capabilities are enabled: Reception of all navigation information (Position, COG/SOG, Heading, Wind, AIS, etc.) from the NavNet3D Network Real-Time synchronization of the Active Route among the PC and every NavNet3D MFD display on the network Exchange Routes and Waypoints from the PC to NavNet3D MFD(s) over the network Share charts between the NavNet3D and TIMEZERO software Enable the Chart Server for the NavNet3D MFD(s) View and control the DRS Radar (*) When TIMEZERO is connected to a NavNet TZtouch network, the following capabilities are enabled: Reception of all navigation information (Position, COG/SOG, Heading, Wind, AIS, etc.) from the NavNet TZtouch Network Real-Time synchronization of the Active Route between the PC and every TZtouch MFD display on the network Share charts between the NavNet3D and TIMEZERO software Display and control of the DRS Radar (*) (*) MFD must be present on the network The Plus Pack also enables connection to a Furuno FAR2XX7 series radar when this optional Furuno Radar Plus Pack is unlocked. These commercial-grade radars have an Ethernet connection that makes the connection to TIMEZERO possible, and enables the following capabilities: View and control the Furuno 2XX7 Radar from your PC Acquire and display ARPA targets Receive Position, COG/SOG, Heading data from the FAR2XX7 Network

TZ Furuno Sounder Module - Digital Download Maximize navigation security and your fishing potential by integrating TIMEZERO software with an Ethernet-based Furuno Sounder. The Furuno sounder models DFF1, DFF3, DFF1-UHD, BBDS1 or FCV1150 are natively compatible with TIMEZERO software, and offer many functions that act as real aids to navigation and fishing, for both professional and recreational users. Recreational users will appreciate the ability to display the sounder image directly on their computer screen and have full control of the sounder from their computer. This hardware integration is critical to professional fishermen, allowing them to locate fish and save marks to the sounder image. Features: By adding the Furuno Sounder Plus Pack to TIMEZERO software*, the PC display is turned into a powerful, dual-frequency digital fish finder. The following FURUNO Ethernet Sounders models are natively compatible with TIMEZERO software: DFF1, DFF3, BBDS1, DFF1-UHD, or FCV1150 . Enjoy full control of the Furuno sounder directly from the software, with a dedicated sounder Tool Bar in the User Interface Historic data: the user can scroll backwards to view sounder data received within the past 3 minutes (approximately) to identify interesting echoes Add a mark: by double-clicking on the sounder image, a mark will automatically be created in the corresponding point on the navigation chart too Geolocation: by clicking the Event Tool in the Sounder workspace, a mark will be instantly created at the boat's current location Historic Data TIMEZERO stores the data received in the past 3 minutes (approximately). You can then easily go back and identify echoes that seem interesting. Bottom Discrimination feature available with the FURUNO BBDS1 and DFF1-UHD only: The bottom discrimination window can be displayed from the Sounder workspace. This information is helpful in spotting the rich fishing ground where you can boost your catch of the day. Bottom components: The BBDS1 and DFF1-UHD sounders classify the sea bottom into the following categories of sediment: mud, sand, gravel, and rock. This is achieved by analyzing echo characteristics from the bottom components such as particle size and hardness. In addition to providing the seabed information, they also display its level of certainty in relation to the type of sediment that is shown in your software. This information appears in the discrimination window and lets you know how reliable the data is in particular areas. Bottom Component Localization: Rolling the cursor over the bottom discrimination window will automatically display a _red cross_ cursor on the Chart allowing the user to geo-localize any bottom component. Bottom Hardness: As the BBDS1 and DFF1-UHD receive bottom hardness data, it is also possible to record this information within the software, along with the bottom depth. You can then display bottom hardness on your chart using a color spectrum, or just in black and white. These colors will indicate the softest bottom (mud) to the hardest bottom sediment (rock). Connection of these sounder models is very simple - the compact network sounder unit connects directly to your PC via a single Ethernet cable. (*)Without adding the Furuno Sounder Plus Pack to TIMEZERO software, you will only be able to share standard NMEA0183 or NMEA2000 digital depth data between the Sounder and TIMEZERO.

i50 SeaTalkng Instruments - Tridata with Thru-Hull Transducer The i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays. For the ultimate in flexibility, the i50 Instruments support SeaTalkng CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of the i50 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument has a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i50 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase. i50 Tridata Instrument  The i50 Tridata is a convenient 3-line instrument that combines the Speed and Depth Instruments functions into one display. This makes the i50 Tridata ideal for installations on helms where space is a premium or as a depth and speed repeater solution for other locations on the boat. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Use a primary display or as a repeater of i50 depth and speed instruments Built-in depth and speed transducer connections M78713-PZ Nylon Depth Transducer with 45ft cable E70673 ST900/P120 S/T Thru Hull - 13.7m Cable The i50 Tridata's 3-line LCD can show current depth, current speed, distance log, trip log, and water temperature. Additional display modes include maximum speed, average speed, and VMG to windward. Tridats have a count-up timer and 2 race start timers for racers. Tridata's robust alarm functions include a shallow depth alarm, deep depth alarm, shallow anchor alarm, and deep anchor alarm. Features: Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems. Large, crisp LCDs with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70, and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

MR1308UABK Bluetooth® - Fully Marinized MP3-Compatible Digital Media Receiver w/USB & SD Memory Card Ports & Aux Input  Features: Weather Proof 50 Watts x 4 Max Power, Balance/Fader/Bass/Treble and Preset built-in EQ No CD or DVD Player, Plays MP3, WMA, FM/AM, or Digital Media on Smart Phones Compatible with Audio out from Smart Phones and MP3 Players USB, SD, Aux, Input Front Pre Amp Outputs Detachable Front Panel, Wireless Remote Bluetooth Hands-Free, Make and receive calls, Bluetooth Audio Streaming. Play and control music and apps like Spotify/Pandora wirelessly Bluetooth Allows our Bluetooth-equipped source units to make wireless hands-free calls when paired with a Bluetooth-equipped Smartphone. Communicate via the built-in microphone on most of our units [or external microphone if provided] and listen thru your car’s speakers.

Bluetooth Digital Media Receiver with Cover Master boating moments with Roswell's Digital Media Receiver, featuring Bluetooth connectivity, AM/FM radio, and USB/Aux inputs. IP66-rated for excellent water resistance, this versatile sound solution commands your arsenal of audio in harsh marine environments.  Be sure to check out the Digital Media Wired Remote to control the Roswell Receiver from the swim platform or any secondary location on your boat. Features: IP66 rated for excellent water resistance     Built-in Bluetooth 3 in. Full-Color Display     RGB Backlit Keypad AM/FM|USB/Aux inputs     5 band Equalizer 4 Zones (3 full-range + 1 sub-zone with adjustable low pass filter)     Works with the Digital Media Wired Remote Specifications: Dimensions: Width – 4.5 in (115.56 mm) / Height – 4.3 in (109.54 mm) / Mounting Depth – 3.3 in (82 mm) Power: Internal Amplifier 50 Watts/Channel (RMS Power@4 Ω, 14.4V, <1% T.H.D) / 2V RCA Preamp Outputs x 4 zones Inside the Box: (1) receiver (1) cover (1) receiver wire harness Mounting screws

SXV300B SiriusXM Satellite Receiver Connect, control and enjoy all the wonders of satellite radio on the sky.  The compact SXV300 tuner is truly plug-and-play with compatible stereos and installs easily and discreetly behind or under the dash for a fully integrated look. *Must be connected to a SiriusXM SXV300 antenna (sold separately) and a SiriusXM subscription is required. *Sold as an Individual ∗SiriusXM Promotion - Purchase a SiriusXM Receiver and receive a $ 70.00 rebate and get 3 Free Months SiriusXM Service with Subscription  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Keywords: raymarine, i70 multifunction color instrument, i50 instrument, raymarine depth gage, raymarine speed gage, raymarine tridata instrument display, raymarine instrument displays, raymarine multifunction display

Easy Navtex Easy to read. This new navtex receiver features big, bold characters and intuitive message formatting. Easy to program. Simple menus let you select which stations and which message categories you want to receive. Easy on your battery. Its low power consumption and power saver mode on the backlight ensure minimum current drain. Easy channel switching. Programmable automatic switching between the 518Khz and 490Khz channels. No more getting up early to switch channels. Easy signal analysis. The built in spectrum analyser shows the signal in real time whilst you are receiving messages. Easy Navtex is designed for panel mounting and is supplied with antenna, power cable and dust cover. Features: Non volatile program memory 518 & 490 kHz operation with programmable channel switching Display size: L-150mm, H-112mm, D-42mm Compact panel mount display (stirrup mount bracket available) Large letters for easy viewing Built in real time spectrum analyser Very high contrast display with white backlight Power save auto timer on backlight Signal quality indicator and message error counter Supply voltage nominal 12V Consumption 50mA @ 12V (100mA with backlight) Active micro antenna: H-195mm & 7m cable Optional rail mount bracket This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Raymarine Autopilot Hot Summer Deals   Purchase a Raymarine Autopilot System Pack and receive a FLIR MasterCard Rewards Card via mail-in rebate. Receiver a $300 Reward on EV100 and EV200 Autopilot Packs and a $400 Reward on EV300 and EV400 Autopilot Packs now until September 5, 2016.     Raymarine MFD Hot Summer Deals   Purchase any Raymarine 12" a-Series or eS-Series Multifunction Display and receive a FLIR MasterCard Reward Card by mail. Receive a $200 Reward Card by mail. Receive a $200 Reward on a125, a127 and a128 MFDs and a $300 Reward on eS127 and eS128 MFDs now until September 5, 2016.     Raymarine Sonar Hot Summer Deals   Purchase a CP100, CP200, CP370, CP470 or CP570 Sonar Module and receive a FLIR MasterCard Reward Card by mail. Receive a $100 Reward on CP100, CP200 or CP370, a $200 Reward on CP470 and a $300 Reward on CP570 now until September 5, 2016.     Raymarine Dragonfly Hot Summer Deals   Purchase a new Dragonfly-5 PRO and receive $100 savings or a Dragonfly-7 PRO with Navionics+ charts and receive $150 savings during the Raymarine Dragonfly Hot Summer Deals Sales Event and save big! Offer valid now until September 5, 2016.    Specials     Rebates    Close Outs     Remanufactured

NavNet TZtouch2 Black Box Chartplotter/Fishfinder Total Control, Simply Refined With the ability to drive multiple monitors with full HD HDMI video output in any combination of monitor aspect ratios (4:3 and 4:3, 16:9 and 4:3, or 16:9 and 16:9), a refined graphical user interface, and a built-in RezBoost Fish Finder, Furuno's NavNet TZtouch2 Black Box is a beauty to behold and use. Whether you are searching for hot fishing grounds, plotting your next route, or using your Radar to navigate through fog, NavNet TZtouch2 delivers smooth operation with familiar touch gestures. Simply Refined, Simply Beautiful Following in the footsteps of the original NavNet TZtouch, TZtouch2 features a refined user interface that is all about usability. Elegantly designed, NavNet TZtouch2 allows you to build a navigation suite that is not only functional, but offers a luxurious look and feel. Taps, swipes, pinches, and custom multi touch gestures are instantly transformed into action, giving you full control of every component connected to your network. Incredibly easy-to-use controller and graphical user interface The optional MCU005 NavNet TZtouch2 Black Box controller enhances the built-in Multi Touch graphical user interface, and sets a new benchmark for "easy to use" in the marine electronics industry. This interface is not only intuitive, but is as easy to use as the phone in your pocket. The combination of an ergonomically designed, logical controller, along with a touch-screen Graphical User Interface, make operation simple. With taps, slides and swipes, you will be up and using your TZtouch2 in no time at all. Menus and other features slide out from each of the sides of the screen, ensuring that the most important tasks are literally right at your fingertips. The available MCU004 Remote Control option features a large rotary knob which can be utilized for zooming in/out, while the joy stick allows you to pan around the chart and move the cursor on the screen. The MCU004 remote has 8 dedicated buttons that operate different functions, such as Edge Swiping, Home, Stand By/Auto for Autopilot control, MOB, and Center on vessel. Powerful Fish Finder with built-in Furuno features The built-in Fish Finder is a dual-frequency (50/200kHz), 600W/1kW power output sounder. It includes Furuno’s unique Bottom Discrimination and AccuFish modes, and also incorporates another new Furuno proprietary Fish Finder technology, called RezBoost. RezBoost is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fantastic target resolution and separation, without the need to change out your transducer, or purchase expensive broadband transducers. With RezBoost, you can now achieve target separation and resolution that was previously limited to Furuno commercial-grade Fish Finders. Freedom to build the helm of your dreams NavNet TZtouch2 is a component-based system that utilizes Furuno’s award winning network products. You can add a variety of UHD Radars, from a 4kW NXT Dome up to a 25kW X-Class Open Array. As with NavNet TZtouch, you can integrate, display, and control the NavPilot Autopilot, and Furuno’s FI70 Instrument. Both of these products have displays that match TZtouch2, giving your helm a beautiful all-glass finish. Additional sensors that can be added to the network include AIS, Weather Fax, Sirius/XM Satellite Weather, Fusion Marine Stereo, and IP Cameras, as well as NMEA2000 and Furuno CAN bus devices. It even includes one NMEA0183 output port to send data to legacy systems. Remotely view and control your bridge with apps for your smartphone and tablet  Engineered to utilize the latest technology, NavNet TZtouch opens the door to cutting edge WiFi features, such as tablet and smartphone apps, points of interest (POI), real time weather data, software updates and more. Take full control of your NavNet in a whole new way. The TZtouch Remote app allows you to operate your system remotely with your smartphone or tablet over WiFi, when connected to the network. MapMedia Raster and Vector Chart Library Freely choose the charts that fit your individual needs and preference. MapMedia's NOAA Raster and Vector charts for the U.S. Coasts, Gulf of Mexico, Alaska and Hawaii come pre-loaded. In addition, MapMedia brings you free satellite photos and detailed fishing bathymetric charts that can be download for the U.S. Outside of the U.S., "C-MAP" and "Datacore by Navionics" vector cartography can be purchased and downloaded to your NavNet with ease. MapMedia cartography integrates cutting edge algorithms with high resolution image processing techniques to deliver a fusion of digital navigation charts and satellite photography.  Satellite PhotoFusion™ offers a birds-eye view without obstruction of critical data You can load any two ultra-wide high-resolution satellite photo areas at your convenience. Land areas (zero depth) are completely opaque, so these areas are displayed as high-resolution satellite photos on the chart. As the depth increases, the satellite photography becomes more transparent. This allows you to see where the shallows end and the deeper water begins, while still allowing the raster or vector chart to be visible. Free & easy-to-use marine weather forecasts The weather tool is completely free and easy to use, giving you unlimited access to weather forecasts worldwide 24 hours a day provided by NavCenter. Select geographic coverage, data type, period of time, and then choose how to receive the file. NavNet TZtouch2 provides up to 16 days of weather forecasting. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

AIT2000 Class B **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. ** Click here to download form. The AIT2000 uses the latest AIS Transponder technology to squeeze more performance and interfacing options in to a housing that is half the size of our previous generation transponder. This ultra-compact Class B Transponder has three outputs; NMEA 0183, NMEA 2000 and USB connection, allowing it to work with every AIS compatible chart plotter or software package on the market today. Featuring a remote silence button option, two NMEA 0183 Inputs and Outputs, four status LEDs and rugged vibration-proof mounting brackets, the AIT2000 is the third generation of Digital Yacht AIS transponder and replaces the very popular AIT1000. Configuration of your vessel's fixed data, such as MMSI, call sign, boat name, dimensions etc. is made easy with the included Windows and Mac compatible proAIS2 software. Once configured, the unit will provide AIS data to a PC or Mac running suitable navigation software or a dedicated chart plotter, such as the latest Garmin, Raymarine, Navico, Standard Horizon and Furuno units. As well as transmitting your own vessel's position so that other AIS equipped vessels know where you are, the AIT2000, when connected to an existing VHF antenna (via a splitter) or dedicated AIS antenna, will receive all AIS targets within range of your boat - typically up to 30NM. With two industry standard NMEA 0183 outputs, our own N2Net connector for plugging in to an NMEA 2000 network and a simple plug and play USB connection to a PC, the AIT2000 is the perfect AIS transponder solution for all light marine vessels up to 300 tons. Features: Latest generation AIS technology - featuring a brand new AIS transponder (Class B) design Ideal for use with existing plotter and radar systems Built-in high performance 50 channel GPS receiver (ideal also as a backup GPS) USB Interface for simple plug and play connection to a PC or Mac Includes N2Net interface and cable for connection to NMEA 2000 network High speed NMEA output (38,400 baud) - compatible with industry standard plotters Comes complete with GPS antenna with integral 1"x14TPI thread monut Requires VHF antenna or dedicated AIS antenna (available as optional accessory) or splitter (SPL250) Remote Silence Switch option Easy to install black box solution NOTE - AIS target range, like VHF range is dependent upon a number of installation factors such as; antenna gain, antenna height and size of ground plane. Ranges in excess of 20 miles should be possible if all of these factors are perfect. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

TZ Professional Software - Digital Download This is a digital download, please include your your email address with your order and the new unlock code will be sent via email. Whether for Commercial Fishing or for a Workboat TZ Professional  is the latest version of our marine navigation software and the one sole product that suits all the needs of professionals at sea. Close to 25,000 vessels currently use our TIMEZERO software. This version offers an incredible amount of features specifically designed for both professional fishermen and workboats. Optional PBG module The latest version of the PBG module will allow you to create charts of the seafloor even clearer and more realistic. The 2D and 3D imaging will now have customizable color coding scales which will allow for instantaneous precision research.The 3D view will make visualization of data even more simple and intuitive. Optional Profile window, is a remarkable tool! Instantaneously display a point to point depth profile window. This 2D view will allow you to identify the depth variations with unequalled precision (rocks, shipwrecks, etc.). Fishing Workspace A workspace exclusively dedicated for professional fishermen will allow for personalization of 2D/3D so accessing information that is most pertinent is shown first.Workboats Compatibility with S57/S63 charts Keeping up to date charts is an essential element to ensure the safety of all those at sea. TZ Professional is now compatible with the official S57/S63 formats.The official S57/S63 charts are updated every week. These maps respect the S52 standard developed by the International Maritime Organization (IMO). The iconography offers a simplified display in order to improve the readability of the marine charts on screens. Advanced Route Management Route Planning is of the utmost importance for all professions at sea.Our new technology assures the security of a route upon creation: Through color codes (green/red) it is instantaneously possible to know if the depth is sufficient for the safe passing of your boat. An automatic route wizard will provide you with information regarding to the optimal departure and arrival time, taking into account tides and currents. AIS Features The configuration of AIS can sometimes prove to be complex. Our new AIS module allows for complete configuration of all information directly within TZ Professional (Status, Destination, etc.). Furthermore, it is now possible to receive and send AIS text messages from TZ Professional. This system will allow for simplified communication, free and individual with all boats which are equipped with AIS. Security Cone The new security cone is a feature in adherence with the official rules of the IMO. It takes into account the information of vector charts in order to detect isolated dangers and shallow areas. If an obstacle is detected inside this cone in front of the boats trajectory, an anti-grounding alarm will automatically be triggered. Optional Voyage Data Recorder Module This new module that comes as an option, offers the possibility to save all the information received from the connected sensors to TZ Professional (GPS, radar, AIS, etc.). It is particularly useful in the case of an incident as it allows one to look back at all the available information relative to the surrounding environment of the boat at that given date and time. System Requirements: Microsoft Windows 7 SP1, Windows 8.1 or Windows 10 CPU 2 GHz 4GB of RAM Video Board: Minimum - Integrated Intel Graphic Chipset (i5 4th generation with HD4400 or above) Recommended - (for PBG and Multi monitor) Dedicated Video Board with 1GB VRAM Screen Resolution: 1024 X 600 or higher Hard Disk: 20 GB of free memory USB or Serial Port for connecting instruments or Serial Port for connecting instruments 100 Base-T Network Adapter for Furuno Ethernet Sensors Charts not included 1 work station

TZ Professional Upgrade from TZ Navigator - Digital Download This is a digital download, please include your existing TZ Navigator serial number along with your email address and the new unlock code will be sent via email. Whether for Commercial Fishing or for a Workboat TZ Professional is the latest version of our marine navigation software and the one sole product that suits all the needs of professionals at sea. Close to 25,000 vessels currently use our TIMEZERO software. This version offers an incredible amount of features specifically designed for both professional fishermen and workboats. Optional PBG module The latest version of the PBG module will allow you to create charts of the seafloor even clearer and more realistic. The 2D and 3D imaging will now have customizable color coding scales which will allow for instantaneous precision research.The 3D view will make visualization of data even more simple and intuitive. Optional Profile window, is a remarkable tool! Instantaneously display a point to point depth profile window. This 2D view will allow you to identify the depth variations with unequalled precision (rocks, shipwrecks, etc.). Fishing Workspace A workspace exclusively dedicated for professional fishermen will allow for personalization of 2D/3D so accessing information that is most pertinent is shown first.Workboats Compatibility with S57/S63 charts Keeping up to date charts is an essential element to ensure the safety of all those at sea. TZ Professional is now compatible with the official S57/S63 formats.The official S57/S63 charts are updated every week. These maps respect the S52 standard developed by the International Maritime Organization (IMO). The iconography offers a simplified display in order to improve the readability of the marine charts on screens. Advanced Route Management Route Planning is of the utmost importance for all professions at sea.Our new technology assures the security of a route upon creation: Through color codes (green/red) it is instantaneously possible to know if the depth is sufficient for the safe passing of your boat. An automatic route wizard will provide you with information regarding to the optimal departure and arrival time, taking into account tides and currents. AIS Features The configuration of AIS can sometimes prove to be complex. Our new AIS module allows for complete configuration of all information directly within TZ Professional (Status, Destination, etc.). Furthermore, it is now possible to receive and send AIS text messages from TZ Professional. This system will allow for simplified communication, free and individual with all boats which are equipped with AIS. Security Cone The new security cone is a feature in adherence with the official rules of the IMO. It takes into account the information of vector charts in order to detect isolated dangers and shallow areas. If an obstacle is detected inside this cone in front of the boats trajectory, an anti-grounding alarm will automatically be triggered. Optional Voyage Data Recorder Module This new module that comes as an option, offers the possibility to save all the information received from the connected sensors to TZ Professional (GPS, radar, AIS, etc.). It is particularly useful in the case of an incident as it allows one to look back at all the available information relative to the surrounding environment of the boat at that given date and time. System Requirements: Microsoft Windows 7 SP1, Windows 8.1 or Windows 10 CPU 2 GHz 4GB of RAM Video Board: Minimum - Integrated Intel Graphic Chipset (i5 4th generation with HD4400 or above) Recommended - (for PBG and Multi monitor) Dedicated Video Board with 1GB VRAM Screen Resolution: 1024 X 600 or higher Hard Disk: 20 GB of free memory USB or Serial Port for connecting instruments or Serial Port for connecting instruments 100 Base-T Network Adapter for Furuno Ethernet Sensors