SS571 Stuffing Tube - Stainless Steel  Replacement Stuffing Tube for R99, R109C, R209, R309, R409C, R509C, R609, CM260, CM265C, PM265C, CM111C, CM599C, M180 and M188 and most other Transducer thru-cable applications. Specifications: Hole Inner Diameter (inch/mm): 1"/25mm, Shaft OD 1.68"/43mm Usable Shaft Length: 1.85 in. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

Swivel Base Rod Holders RH579XL Half Angle 15° Extra Long Tube Stainless Steel Flush Mount w/ Swivel Base Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

Stainless Steel Tube & Rod for Up To 150HP Up To 150HP Outboard Specifications: Cylinder Tube = Stainless Steel Cylinder Tube Dia. = 1.33 Inches Cylinder Rod = Stainless Steel Cylinder Brackets = Stainless Steel Cylinder 1 " Nylok Nuts = Stainless Steel Cylinder End Caps = Cast Aluminum Cylinder Rod Stroke = 7-1/2 Inches Cylinder Type = Un Balanced Cylinder  Cylinder Volume Big Side Vol = 155 ccSmall side Vol = 115 cc Steering Wheel HO/HO = 5.5 and 4.1 Turns Total length Rod Compressed = 15.75 Inches Rod Extended = 23.00 Inches Cylinder Total Weight = 3.15 Pounds (1427 Grams)

Shakespeare Style 5215 SQUATTY BODY® VHF Marine 36" LENGTH, 3dB END-FED 1/2-WAVE STAINLESS STEEL WHIP A favorite with Sailboat owners, this lightweight, low profile, stainless steel antenna is specially designed for masthead mounting. Hermetically sealed, tin-plated copper wire coil Stainless steel body and whip SO-239 connector - cable sold separately Mount: Stainless steel "L" bracket supplied, for mast mounting One section Shakespeare Limited Warranty: 2 years technical Specifications: Frequency: VHF Marine band Bandwidth: 7 MHz SWR: 1.5:1 @ 156.8 MHz Impedance: (Ohms): 50 Gain: 3 dB Max Input (Watts): 50 DC Ground: NO Termination: SO-239 connector Height (feet): 3 Polarization: Vertical Radiation pattern: Omni-directional

Shakespeare Style 4700 6" Extension Mast Shakespeare extension masts can be used to extend the reach of smaller marine antennas by increasing their height above the water, or by helping them clear obstructions that would otherwise interfere with proper radiation. Shorter masts are useful for mounting marine TV antennas, GPS receivers, marine satellite TV dishes and the like. 6" long Stainless steel construction Standard 1" - 14 threads, male upper, female lower One inch diameter Durable and attractive

Shakespeare Style 4700-1 Extension Mast Shakespeare extension masts can be used to extend the reach of smaller marine antennas by increasing their height above the water, or by helping them clear obstructions that would otherwise interfere with proper radiation. Shorter masts are useful for mounting marine TV antennas, GPS receivers, marine satellite TV dishes and the like. 1' long Stainless steel construction Standard 1" - 14 threads, male upper, female lower One inch diameter Durable and attractive

Shakespeare Style 4700-2 24" Extension Mast Shakespeare extension masts can be used to extend the reach of smaller marine antennas by increasing their height above the water, or by helping them clear obstructions that would otherwise interfere with proper radiation. Shorter masts are useful for mounting marine TV antennas, GPS receivers, marine satellite TV dishes and the like. 2' long Stainless steel construction Standard 1" - 14 threads, male upper, female lower One inch diameter Durable and attractive

Surface Mount Oblong LED Courtesy Lamp - White LED - Stainless Steel Bezel Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread. Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes. Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry. Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included. Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE

Surface Mount Oblong LED Courtesy Lamp - Red LED - Stainless Steel Bezel Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread. Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes. Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry. Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included. Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE

Surface Mount Oblong LED Courtesy Lamp - Blue LED - Stainless Steel Bezel Oblong LED lamps are offered as either dedicated step lamps or general courtesy illumination with equal vertical spread. Step lamps carry engineered optics to direct light downwards at 30° safely illuminating deck and step tread surfaces without shining into the eyes. Completely sealed and ultra durable, Hella Marine LED lamps may be installed on a vessels interior or exterior, wet or dry. Polished 316 Stainless Steel bezels are included with each part number. Black and white plastic end caps are also included. Specifications: Lens Material: UV and enhanced impact resistant Grilamid Rim Material: 316 stainless steel Cable: Pre-wired with 120mm of marine cable Operating Voltage: Multivolt 12 / 24V DC Power Consumption: 0.5W ( < 0.04A@12V / < 0.02A@24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 35g (including cable) Approvals: CE

170 Finger Grip Destroyer 5-Spoke 13.5" Stainless Steel Cap 3/4" Tapered Shaft with Knob The Destroyer Wheel is a 5-spoke stainless steel steering wheel that can be a great addition to any boat. This specific steering wheel comes with a fitted black center cap. Features: Destroyer Wheel 6 spoke Standard rim Back center cap 10-degree dish Fits a 1" straight shaft

170 Finger Grip Destroyer 5-Spoke 15.5" Stainless Steel Cap 3/4" Tapered Shaft with Knob The Destroyer Wheel is a 5-spoke stainless steel steering wheel that can be a great addition to any boat. This specific steering wheel comes with a fitted black center cap. Features: Destroyer Wheel 6 spoke Standard rim Back center cap 10-degree dish Fits a 1" straight shaft

i50 SeaTalkng Instruments - Tridata with Thru-Hull Transducer The i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays. For the ultimate in flexibility, the i50 Instruments support SeaTalkng CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of the i50 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument has a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i50 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase. i50 Tridata Instrument  The i50 Tridata is a convenient 3-line instrument that combines the Speed and Depth Instruments functions into one display. This makes the i50 Tridata ideal for installations on helms where space is a premium or as a depth and speed repeater solution for other locations on the boat. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Use a primary display or as a repeater of i50 depth and speed instruments Built-in depth and speed transducer connections M78713-PZ Nylon Depth Transducer with 45ft cable E70673 ST900/P120 S/T Thru Hull - 13.7m Cable The i50 Tridata's 3-line LCD can show current depth, current speed, distance log, trip log, and water temperature. Additional display modes include maximum speed, average speed, and VMG to windward. Tridats have a count-up timer and 2 race start timers for racers. Tridata's robust alarm functions include a shallow depth alarm, deep depth alarm, shallow anchor alarm, and deep anchor alarm. Features: Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems. Large, crisp LCDs with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70, and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

Uncut Single Instrument Pod for Triton2 - Stainless Steel Clamp Max Useable Face: (5″ × 5″) Max Cut Out Area: (4.38″ × 4.38″) Seaview offers a solution to the age old problem of figuring out where to mount all your instruments on your sailboat. The Seaview Rail Pod allows you to mount smaller displays and instruments directly to the rail. Allowing you to postion the instrument where it is most optimal for you. Fits onto 1", 1-1/8" or 1-1/4" rails. A single high polished 316 stainless steel clamp is used. Cables are routed internally through the clamp and into the rail. The Rail Pod housing is made from UV protected ABS plastic housing, and sealed with a water tight rubber gasket. Tamper resistant screws are used to hold the housing together. A reinforced base made from King Starboard is added for increased strength and stability (on certain models). Stainless Steel Clamps A single high polished stainless steel clamp is used to secure your Rail POD onto 1", 1.125" and 1.25" (25mm to 32mm) rails. Seaview Rail Pods fit standard 9.5", 12" and non standard guard rails. Security screws are used to hold the Rail Pod together. A water tight gasket is used to prevent water from entering inside the pod, while a GORE-TEX ventilation vent lets hot air to escape without letting water in. Optional Accessory Pod One of the unique abilities with the Rail Pod is the ability to add optional side pods (part #SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the pod box size you choose you are able to mount either one to four of these accessory pods. This gives the user lots of flexible solutions to optimize their setup. The SP1BOX is made of UV resistant white ABS plastic and held together with tamper resistant screws and sealed with a rubber gasket.