FCV600 CHIRP Fish Finder The 5.7” FCV600 is capable of driving either a CHIRP or dual-frequency CW (continuous wave) transducer, allowing users to configure the fish finder to suit almost any need. With a sleek, piano-black presentation, comfortable rubber keys, and a robust rotary knob controller, the FCV600 gives users the freedom to choose from a wide variety of transducers. The soft-touch keys are inclined at the top and bottom, making them comfortable to press while creating an easy-to-operate and intuitive system. Sunlight and yellow color palettes offer greatly improved visibility in daylight and for those who deal with color blindness. The Color Range Expansion feature broadens the range of discrete signal intensities that can be detected and paints them in different colors. With color range expansion, the range of identifiable echoes is expanded, so you can intuitively identify bottom fish from the seabed. Furuno’s RezBoost™ signal processing technology produces a picture that is up to 8 times clearer, breathing life into the standard CW transducer users may already have installed. A second FCV600 display can be installed to show the echoes and nav data from the FCV600 via the built-in wireless network. This simple yet powerful solution allows for continuous monitoring of the underwater situation from the stern or bow while fishing with a simplified installation. Features: 5.6” (FCV600) TruEcho CHIRP/CW Fish Finder Drives either a CHIRP or CW transducer Color palettes offer unbeatable daylight visibility Color Range Expansion displays returns from more discreet signal frequencies for unbeatable target separation RezBoost™ signal processing produces a picture up to 8 times clearer Wireless 2nd display capability Heave correction with the satellite compass

Marine Navigation & Instruments, Supplies and Equipment With a wide variety of Marine Navigation equipment and Instruments, we can help you find your location on the waterways, avoid hazards, and be respectful of other boaters. The accessories you have on your boat are important, but very few of them are as valuable as the AIS systems, autopilots, black box modules, and other options you can choose from when you want to make sure you can find your way there and back again while staying away from areas that could mean running aground or experiencing other dangers. We offer many types of navigation equipment, including cameras - network video, ice flashers, and marine monitors.   Depending on where you are going to be boating and what you plan to do with your time on the water, you can also find a fishfinder/sounder - color or a fishfinder/sounder - mono that will be right for you, along with GPS - chartplotters, GPS - fishfinder combos, or a GPS - track plotter. Network accessories and network capable displays are available, and we have a selection of night vision, software, transducers and transducer accessories, and weather fax equipment. If you need radar - stand alone options or radar domes / arrays, look no further than right here, where the selection is good and so are the prices.

FCV800 CHIRP Fish Finder The 8.4” FCV800 includes all of the functionality of the FCV600 but features dual transducer ports, allowing for the simultaneous use of both CHIRP and CW channels. The dual transducer ports of the FCV800 offer the best of both worlds. Features such as Furuno’s Accu-Fish fish size assessment tool and Bottom Discrimination to display what kind of material the bottom is composed of require a dual-frequency CW transducer, while Furuno’s TruEcho CHIRP delivers greater detail and target separation for baitfish, game fish, and structure. With the FCV800’s ability to drive both TruEcho CHIRP and CW options at the same time, those sought-after CW-only features can be combined with TruEcho CHIRP’s frequency-modulated signal to deliver those exclusive Furuno features while providing better resolution for targets on the screen.  Features: 8.4” (FCV800) TruEcho CHIRP/CW Fish Finder Drives either a CHIRP or CW transducer Drive a CHIRP and CW Transducer simultaneously (FCV800 only) Color palettes offer unbeatable daylight visibility Color Range Expansion displays returns from more discreet signal frequencies for unbeatable target separation RezBoost™ signal processing produces a picture up to 8 times clearer Wireless 2nd display capability Heave correction with Satellite Compass TLL Output (FCV800 Only)  Bottom Hardness Output (FCV800 Only)

  Feature Rich BBDS1 Bottom Discrimination Fish Finder Delivers Enhanced Capabilities At The Same Price As The Departing DFF1     The DFF1 Digital Fish Finder, a NavNet family staple for years, is being replaced with the more versatile BBDS1 Digital Bottom Discrimination Fish Finder. In addition to including all the same functionality and interfacing capabilities as the DFF1, the BBDS1 also brings several enhanced features, including bottom discrimination and bottom classification, providing significant advantages for virtually any boater. The best news is that the BBDS1 delivers all of these excellent enhancements at the same price as the departing DFF1.       Clear indication of bottom type (mud, sand, gravel, rock) w/probability graph Bottom classification performance accurate from 5 to 100 meters Dual Frequency (50/200 kHz) with selectable output power (600W or 1kW) Uses the same transducers as the DFF1, as well as leveraging Bottom Discrimination functionality when specific transducers are installed Fully compatible with NavNet 3D, TZtouch and TZtouch2 Same connections and interfacing capabilities as the DFF1 AccuFish provides clear picture, making it easier to discriminate between bait fish and larger target species Furuno Digital Filter (FDF) automatically adjusts gain, STC, output power and suppresses main bang at the surface, allowing accurate reading in shallow water Echo presentations in 8, 16 or 64 colors Automatic function for detecting fish and bottom in both shallow and deep water White line feature helps discriminate fish lying near the seafloor         Specials   Closeouts    Remanufactured    Rebates        

NavNet TZtouch3 12" MFD with 1kW Dual Channel CHIRP Sounder with Internal GPS Go on a power trip with Furuno! Furuno listened to you and worked tirelessly to make NavNet TZtouch3 the easiest MFD on the market to use, with all of the power you’ve wanted and more. These 12-inch, 16-inch, and 19-inch MFDs feature a quad-core processor for lightning-fast response, a built-in GPS receiver (TZT12F & TZT16F only), and an internal 1kW TruEcho CHIRP™ Fish Finder, making them ready  for action right out of the box. For those looking for even more power, simply add the all-new 2/3kW Deep Impact TruEcho CHIRP™ Amplifier or the power-packed 100W/200W NXT Solid-State Doppler Radars. Use the PIN Code Lock feature to secure your NavNet TZtouch3 data by requiring a four-digit password to be entered at startup. Features: Built-in Dual Channel 1kW TruEcho CHIRP™ Built-in GPS Receiver on TZT12F Hybrid control 12” display with Rotokey™ and buttons for added accessibility DI-FFAMP – optional high-power TruEcho CHIRP™ Fish Finder Amplifier, designed to work exclusively with NavNet TZtouch3. This 2kW or 3kW TruEcho CHIRP™ Fish Finder amp gets you down to the deepest waters to find your catch. You can even connect a 5kW or 10kW transducer! (BT-5 required) High-power 100W or 200W Solid-State Doppler Radar options, with Target Analyzer™, Fast Target Tracking™, Bird Mode and Rain Mode Quad-screen display configuration allows for presentation of 1, 2, 3, or 4 different functions Compatible with NavNet TZtouch2 Networks Create your routes at home, using TZ Navigator, a web browser*, or TZ iBoat iOS App. Then you can sync  your data from the cloud to your TZtouch3 system. (*Cloud.MyTimezero.com raster planning charts for US only) TZ First Mate App keeps track of your catch and location  Synchronize data with a tablet or smartphone Add Autopilot, Instruments, Radar, AIS, Multi-Beam Sonar, and a variety of other sensors to your NavNet TZtouch3 network Full Autopilot control from MFD, when connected to the NAVpilot-300/711C Compatible with CZone digital switching Free weather data, using NavCenter Weather or optionally connect BBWX4 SiriusXM Weather Receiver This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NavNet TZtouch3 16" MFD with 1kW Dual Channel CHIRP™ Sounder & Internal GPS Go on a power trip with Furuno! Furuno listened to you and worked tirelessly to make NavNet TZtouch3 the easiest MFD on the market to use, with all of the power you’ve wanted and more. These 12-inch, 16-inch, and 19-inch MFDs feature a quad-core processor for lightning-fast response, a built-in GPS receiver (TZT12F & TZT16F only), and an internal 1kW TruEcho CHIRP™ Fish Finder, making them ready  for action right out of the box. For those looking for even more power, simply add the all-new 2/3kW Deep Impact TruEcho CHIRP™ Amplifier or the power-packed 100W/200W NXT Solid-State Doppler Radars. Use the PIN Code Lock feature to secure your NavNet TZtouch3 data by requiring a four-digit password to be entered at startup. Features: Built-in Dual Channel 1kW TruEcho CHIRP™ Built-in GPS Receiver 16” multi-touch IPS displays DI-FFAMP – optional high-power TruEcho CHIRP™ Fish Finder Amplifier, designed to work exclusively with NavNet TZtouch3. This 2kW or 3kW TruEcho CHIRP™ Fish Finder amp gets you down to the deepest waters to find your catch. You can even connect a 5kW or 10kW transducer! (BT-5 required) High-power 100W or 200W Solid-State Doppler Radar options, with Target Analyzer™, Fast Target Tracking™, Bird Mode and Rain Mode Quad-screen display configuration allows for presentation of 1, 2, 3, or 4 different functions IPS LCD provides superior viewability from virtually any angle Compatible with NavNet TZtouch2 Networks Create your routes at home, using TZ Navigator, a web browser*, or TZ iBoat iOS App. Then you can sync  your data from the cloud to your TZtouch3 system. (*Cloud.MyTimezero.com raster planning charts for US only) TZ First Mate App keeps track of your catch & location  Synchronize data with a tablet or smartphone Add Autopilot, Instruments, Radar, AIS, Multi-Beam Sonar, and a variety of other sensors to your NavNet TZtouch3 network Full Autopilot control from MFD, when connected to the NAVpilot-300/711C Compatible with CZone digital switching Free weather data, using NavCenter Weather or optionally connect BBWX4 SiriusXM Weather Receiver This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NavNet TZtouch3 19" MFD with 1kW Dual Channel CHIRP™ Sounder Go on a power trip with Furuno! Furuno listened to you and worked tirelessly to make NavNet TZtouch3 the easiest MFD on the market to use, with all of the power you’ve wanted and more. These 12-inch, 16-inch, and 19-inch MFDs feature a quad-core processor for lightning-fast response, a built-in GPS receiver (TZT12F & TZT16F only), and an internal 1kW TruEcho CHIRP™ Fish Finder, making them ready  for action right out of the box. For those looking for even more power, simply add the all-new 2/3kW Deep Impact TruEcho CHIRP™ Amplifier or the power-packed 100W/200W NXT Solid-State Doppler Radars. Use the PIN Code Lock feature to secure your NavNet TZtouch3 data by requiring a four-digit password to be entered at startup. Features: Built-in Dual Channel 1kW TruEcho CHIRP™ 19” multi-touch IPS displays DI-FFAMP – optional high-power TruEcho CHIRP™ Fish Finder Amplifier, designed to work exclusively with NavNet TZtouch3. This 2kW or 3kW TruEcho CHIRP™ Fish Finder amp gets you down to the deepest waters to find your catch. You can even connect a 5kW or 10kW transducer! (BT-5 required) High-power 100W or 200W Solid-State Doppler Radar options, with Target Analyzer™, Fast Target Tracking™, Bird Mode and Rain Mode Quad-screen display configuration allows for presentation of 1, 2, 3, or 4 different functions IPS LCD provides superior viewability from virtually any angle Compatible with NavNet TZtouch2 Networks Create your routes at home, using TZ Navigator, a web browser*, or TZ iBoat iOS App. Then you can sync  your data from the cloud to your TZtouch3 system. (*Cloud.MyTimezero.com raster planning charts for US only) TZ First Mate App keeps track of your catch & location  Synchronize data with a tablet or smartphone Add Autopilot, Instruments, Radar, AIS, Multi-Beam Sonar, and a variety of other sensors to your NavNet TZtouch3 network Full Autopilot control from MFD, when connected to the NAVpilot-300/711C Compatible with CZone digital switching Free weather data, using NavCenter Weather or optionally connect BBWX4 SiriusXM Weather Receiver This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DFF3-UHD High-Power TruEcho CHIRP Black Box Fishfinder for NavNet TZouch3 & NavNet TZtouch2 TZT2BB Go deeper with more power than you thought was possible. The DFF3-UHD High-Powered TruEcho CHIRP Fish Finder delivers the ability to see fish and bottom structures deeper and clearer than ever before. Furuno’s superior digital signal processing interprets the echoes from fish and underwater structures with unparalleled clarity, accuracy, and resolution at unprecedented depths - we're talking depths down to 15,000 feet! Capable of transmitting across Low, Medium, and High CHIRP ranges, its high power output translates directly into greater resolution and depth capability than a comparably powered standard Fish Finder. Plenty of power and a wide frequency range to Go Deep! The DFF3-UHD provides an incredible 2kW or 3kW of power to a compatible broadband transducer, transmitting across a spectrum of frequencies to ensure that the echo returns on your display come back sharp and clear at every range. Gathering more and higher-quality data than traditional high-power CW Fish Finders, the DFF3-UHD provides significant advantages in signal clarity and target definition. This helps you find more of your target species, game fish and baitfish, even when they are tightly schooled together or near the seafloor. The DFF3-UHD transmits and receives pulses across a combination of Low, Medium, or High frequency ranges with each transmission, showing returns from bait balls and individual fish targets virtually anywhere in the water column. Features: 2kW or 3kW Power Output Transmits across Low, Medium, and High CHIRP frequency ranges High Power = greater resolution and depth capability at all ranges Compatible with NavNet TZtouch3 as well as NavNet TZtouch2 TZT2BB Black Box MFD Gathers more expansive and higher-quality data than comparable tone pulse Fish Finders Find and catch more of your target species, game fish and baitfish, even when they're tightly schooled or near the seafloor A-Scope feature and programmable Fish, Depth, or Temp Alarms Enhanced automatic cruising or fishing modes to suit your style of boating Specifications: Frequency: CHIRP 25-242kHz Power Usage: 12-24VDC Power Output: 2kW-3kW Range: 5000M This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DFF1-UHD Fish Might Call It "The Triple Threat"! Designed to operate over a wide range of frequencies utilizing a broadband transducer, the new TruEcho CHIRP-enabled network sounder DFF1-UHD delivers significant advancements in signal clarity and target definition. The clear presentation of the DFF1-UHD marks individual game fish and bait fish, even when tightly schooled together or very near the sea floor. Benefits of CHIRP sounders: Standard, non-CHIRP Fish Finders operate at one or two individual frequencies and are generally capable of detecting targets and displaying them only within those narrow frequency bands. CHIRP Fish Finders transmit pulses across a wide range of frequencies, allowing Furuno's superior digital signal processing (DSP) to display fish and structure targets with unparalleled clarity, accuracy and resolution. Typical Non-CHIRP Fish Finders operate with a maximum duty cycle of 1% - meaning they transmit a voltage to the transducer no more than 1% of the time. Consequently the transmit pulse can be high power but very short duration, limiting the total energy that is transmitted into the water column. The DFF1-UHD uses a precise sweep pattern across 90 frequencies (50 kHz +/- 20 kHz, 200 kHz +/- 25 kHz) within a long-duration transmission. The equivalent sound energy transmitted into the water is 10 to 1,000 times greater than a conventional Fish Finder, resulting in more energy on target. The results are up to 5x greater resolution and depth capability than comparably powered, standard Fish Finders due to the advanced signal processing of the return echo.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SC33 Compact Dome Satellite Compass, NMEA2000 (0.4° Heading Accuracy) with 6M Cable Sleek, Fast & Accurate The SC33 Satellite Compass provides highly accurate attitude information for navigation equipment such as Radar, Plotter, Autopilot, Fish Finder and Sonar. With its compact GNSS antenna and built-in processor, it can be used for a wide variety of applications on any type of vessel. This all-in-one system delivers incredibly accurate heading and roll & pitch information as well as heaving information, GPS position, SOG (Speed Over Ground), COG (Course Over Ground) and ROT (Rate Of Turn) data. Employing a two-antenna system with a 3-axis gyro and acceleration sensors, the SC33 enables high-speed response capability. Advanced digital signal processing techniques compute accurate heading based on sensor data. NMEA2000 interface is standard for simple installation, while the optional interface unit IF-NMEASC is available for conventional NMEA0183, AD10 and contact closure. The GNSS antenna and advanced parallel signal processing allows the SC33 to achieve more precise Pitch, Roll and Heading measurement than conventional models, providing enhanced performance for all of your connected equipment. Its Micro-C pigtail NMEA2000 cable provides flexibility to run cables in challenging areas. Revolutionary 2-Antenna & Rate Sensor System In order to calculate roll & pitch data, a satellite compass requires two vectors. The SC33 employs a dual GNSS antenna system that calculates a single vector while a 3-axis rate gyro and acceleration sensors add the 2nd vector. This configuration enables the SC33 to calculate highly accurate roll and pitch data without using a third sensor. Features: Highly Accurate Two Antenna Satellite Compass & Rate Sensor System More resistant to multi-path, shock & vibration, compared to previous models Improved time to first fix (TTFF) = 60 seconds (typical) NMEA2000 Certified Interface/NMEA0183 Interface with IF-NMEASC (Optional) Accuracy: ±0.4° RMS (Heading/Roll/Pitch) Position Accuracy: 5.0M (GPS); 3.0M (GPS + SBAS) Integrated Rate Sensors provide Pitch, Roll and Heave Compensation 6 Meter Micro-C Male/Female NMEA2000 Drop Cable (Standard Supply) Pigtail cable w/NMEA2000 connector for convenient connection to drop cable Tri-axis speed & direction via PGN 130578 & "Heartbeat" PGN output SC33 menu access with NavPilot 300 & TZtouch2 (with impending software update) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Keywords: raymarine, i70 multifunction color instrument, i50 instrument, raymarine depth gage, raymarine speed gage, raymarine tridata instrument display, raymarine instrument displays, raymarine multifunction display

  New Product Preview Including 3D Multi-beam Sonar & Radars For NavNet TZtouch & TZtouch2     The Miami Boat show marks the opening of an event that each year continues to set the tone for the recreational boating industry. Furuno would like to introduce the boating public to some exciting new products. We'd like to provide you with a preview of the upcoming products. The star of this year's show for Furuno is certain to be the all-new DFF3D Multi-beam Sonar. We're proud to bring 3D underwater viewing and side-scanning capabilities to our flagship NavNet TZtouch and TZtouch2 MFDs, with this all-new DFF3D black box module. This Multi-beam Sonar takes the highly-desired ability to scan port to starboard under the vessel and ups the ante by displaying unique 3D Sounder History that presents a very intuitive three-dimensional image of the seafloor, along with icons depicting fish distribution. This mode is extremely useful for locking-in on fishing hot spots and assessing the seabed condition. Leveraging Furuno's unique commercial fisheries experience and technology, the DFF3D delivers a sidebar detection range of an unprecedented 650+ feet, while also seeing down to over 1,000 feet, possibly making it the only Sounder many fishermen will need! The DFF3D is scheduled to begin shipping later this spring and will initially be paired with an all-new, motion stabilized multi-beam, thru-hull transducer. Additional transducer options, including a transom mount version, will be available later in the year. Please take a few moments to check out the videos below and accompanying DFF3D brochure that will introduce you to the many features, abilities and benefits of this revolutionary new fishing machine from Furuno!         Enhancing NavNet TZtouch and TZtouch2 sensor options doesn't stop with the DFF3D Multi-beam Sonar. Furuno's already extensive and award-winning DRS family of ultra-high definition Radar sensors is expanding. With the 2016 introduction of the DRS6AX X-Class Radar, Furuno raised the bar on performance for traditional X-Band recreational Radar. Now, we're moving that bar up a couple more notches with two new, high-power X-Class Radar options for NavNet TZtouch and TZtouch2, the DRS12AX and DRS25AX. These two new Radars not only deliver incredibly high performance and useful features, but do so at an extremely competitive price. Scheduled to commence delivery this spring. As with other open array DRS Radars, these new models can be paired with a number of antenna options, ranging in size from 3.5 to 6 feet. Check out the below video on the newly expanded line of X-Class Radars, and download updated brochures for NavNet TZtouch and TZtouch2, which now include product info for these new Radars and the DFF3D Multi-beam Sonar.     In addition to new Sonar and Radar options, NavNet TZtouch2 MFD's will soon provide extensive and valuable data to owners of Yamaha's most popular outboard engines. Furuno is one of the first manufacturers to integrate an MFD with Yamaha Engines, to display gauges and other important information. Furuno collaborated closely with Yamaha to create the interface, while designing the gauges to emulate Yamaha's familiar look and feel. NavNet TZtouch2 interfaces with Yamaha's Helm Master®, Command Link® and Command Link Plus® to bring engine data across the network. This marriage of helm navigation and engine data places all of this critical information at the operator's fingertips, making TZtouch2 a truly turnkey solution for many boats. While this integration will require the purchase of an inexpensive gateway module from Yamaha, the availability of this data on a TZtouch2 MFD will be a no-cost upgrade for customers, as it will be incorporated into an upcoming TZtouch2 software update, coming this spring. While there will be a formal introduction when the software update becomes available, you can get more detailed info on this exciting integration between TZtouch2 and Yamaha engines by reviewing the product brochure.     Yamaha Engine Gauges on TZTL15F MFD   The new product excitement is not only confined to NavNet TZtouch and TZtouch2. Furuno is also pleased to be premiering our latest standalone Radar model, the all-new 1815 Color LCD Radar. The Furuno 1815 assembles some of the very best features of our latest commercial and network models, presenting them in a compact and durable standalone Radar package that includes a stylish, low-profile 4kW Radome antenna, packaged with an 8.4" color LCD display that is a cosmetic match to the extremely popular FCV588 Fish Finder.   The 1815 is designed for a wide variety of vessels, including pleasure craft, workboats and small fishing boats that require an easy-to-use, true color Radar, at an affordable price point. This compact Radar incorporates many of Furuno's latest Radar features, including Furuno's Fast Target Tracking (TT) function, which allows the user to manually or automatically track up to 10 targets. In addition to TT, the 1815 can also display up to 100 AIS targets, when interfaced with an AIS Receiver and applicable sensors. Another useful feature is Furuno's proprietary True Trail mode. With True Trails, moving objects will show a gradation trail of the target in their wake, making it possible to gauge the directional movement of targets at a glance. These features, combined with Furuno's unique True View mode, make reading the display easier and more intuitive, even for novice navigators. The full-featured 1815 Radar will be a very economical upgrade for boaters. For more specific details on the all-new 1815 compact, standalone Radar, be sure to check out the 1815 product brochure.     As you can see, Furuno is going to provide our mutual boating customers with a number of new product surprises. To see these products in action, we trust this New Product Preview will provide you with the latest and greatest info on these upcoming offerings. All Furuno products can be purchased at CLR Marine our Authorized Furuno Reseller.      Specials   Closeouts    Remanufactured    Rebates  

NavNet TZtouch2 Black Box Chartplotter/Fishfinder Total Control, Simply Refined With the ability to drive multiple monitors with full HD HDMI video output in any combination of monitor aspect ratios (4:3 and 4:3, 16:9 and 4:3, or 16:9 and 16:9), a refined graphical user interface, and a built-in RezBoost Fish Finder, Furuno's NavNet TZtouch2 Black Box is a beauty to behold and use. Whether you are searching for hot fishing grounds, plotting your next route, or using your Radar to navigate through fog, NavNet TZtouch2 delivers smooth operation with familiar touch gestures. Simply Refined, Simply Beautiful Following in the footsteps of the original NavNet TZtouch, TZtouch2 features a refined user interface that is all about usability. Elegantly designed, NavNet TZtouch2 allows you to build a navigation suite that is not only functional, but offers a luxurious look and feel. Taps, swipes, pinches, and custom multi touch gestures are instantly transformed into action, giving you full control of every component connected to your network. Incredibly easy-to-use controller and graphical user interface The optional MCU005 NavNet TZtouch2 Black Box controller enhances the built-in Multi Touch graphical user interface, and sets a new benchmark for "easy to use" in the marine electronics industry. This interface is not only intuitive, but is as easy to use as the phone in your pocket. The combination of an ergonomically designed, logical controller, along with a touch-screen Graphical User Interface, make operation simple. With taps, slides and swipes, you will be up and using your TZtouch2 in no time at all. Menus and other features slide out from each of the sides of the screen, ensuring that the most important tasks are literally right at your fingertips. The available MCU004 Remote Control option features a large rotary knob which can be utilized for zooming in/out, while the joy stick allows you to pan around the chart and move the cursor on the screen. The MCU004 remote has 8 dedicated buttons that operate different functions, such as Edge Swiping, Home, Stand By/Auto for Autopilot control, MOB, and Center on vessel. Powerful Fish Finder with built-in Furuno features The built-in Fish Finder is a dual-frequency (50/200kHz), 600W/1kW power output sounder. It includes Furuno’s unique Bottom Discrimination and AccuFish modes, and also incorporates another new Furuno proprietary Fish Finder technology, called RezBoost. RezBoost is a revolutionary new feature that utilizes Furuno’s exclusive digital signal processing protocol to produce fantastic target resolution and separation, without the need to change out your transducer, or purchase expensive broadband transducers. With RezBoost, you can now achieve target separation and resolution that was previously limited to Furuno commercial-grade Fish Finders. Freedom to build the helm of your dreams NavNet TZtouch2 is a component-based system that utilizes Furuno’s award winning network products. You can add a variety of UHD Radars, from a 4kW NXT Dome up to a 25kW X-Class Open Array. As with NavNet TZtouch, you can integrate, display, and control the NavPilot Autopilot, and Furuno’s FI70 Instrument. Both of these products have displays that match TZtouch2, giving your helm a beautiful all-glass finish. Additional sensors that can be added to the network include AIS, Weather Fax, Sirius/XM Satellite Weather, Fusion Marine Stereo, and IP Cameras, as well as NMEA2000 and Furuno CAN bus devices. It even includes one NMEA0183 output port to send data to legacy systems. Remotely view and control your bridge with apps for your smartphone and tablet  Engineered to utilize the latest technology, NavNet TZtouch opens the door to cutting edge WiFi features, such as tablet and smartphone apps, points of interest (POI), real time weather data, software updates and more. Take full control of your NavNet in a whole new way. The TZtouch Remote app allows you to operate your system remotely with your smartphone or tablet over WiFi, when connected to the network. MapMedia Raster and Vector Chart Library Freely choose the charts that fit your individual needs and preference. MapMedia's NOAA Raster and Vector charts for the U.S. Coasts, Gulf of Mexico, Alaska and Hawaii come pre-loaded. In addition, MapMedia brings you free satellite photos and detailed fishing bathymetric charts that can be download for the U.S. Outside of the U.S., "C-MAP" and "Datacore by Navionics" vector cartography can be purchased and downloaded to your NavNet with ease. MapMedia cartography integrates cutting edge algorithms with high resolution image processing techniques to deliver a fusion of digital navigation charts and satellite photography.  Satellite PhotoFusion™ offers a birds-eye view without obstruction of critical data You can load any two ultra-wide high-resolution satellite photo areas at your convenience. Land areas (zero depth) are completely opaque, so these areas are displayed as high-resolution satellite photos on the chart. As the depth increases, the satellite photography becomes more transparent. This allows you to see where the shallows end and the deeper water begins, while still allowing the raster or vector chart to be visible. Free & easy-to-use marine weather forecasts The weather tool is completely free and easy to use, giving you unlimited access to weather forecasts worldwide 24 hours a day provided by NavCenter. Select geographic coverage, data type, period of time, and then choose how to receive the file. NavNet TZtouch2 provides up to 16 days of weather forecasting. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

NavNet TZtouch3 9" MFD, Hybrid Control with Single Channel CHIRP™ Sonar Go on a power trip with the most powerful MFD Series Hybrid controls enhance this 9” Multi Function Display, making it easy and intuitive to use under any sea conditions. Rest your hand on the RotoKey™ as you crash through the waves, and navigate easily to your charted destination. Featuring a new, powerful quad-core processor for lightning-fast response time and a built-in Single Channel 1kW TruEcho CHIRP™ & CW Fish Finder. EASY to use; because finding your happy place shouldn't be difficult! We listened to you and worked tirelessly to make TZtouch3 the easiest MFD on the market to use... bar none. With edge-swipe features and single tap menu options, you’re never more than a tap or swipe away from what you want to see or do. It’s that simple. The return of Hybrid Control Captains who have smaller boats know that when you are crashing through the waves, it can be difficult to get an accurate tap on the screen. That’s why we made a TZtouch3 MFD with Hybrid Control. You get the best of both worlds with a full multi touch display and a handy, built-in keyboard that features a Rotokey™, cursor pad and dedicated buttons! Protect your livelihood with new PIN CODE security The new PIN CODE Lock feature allows you to require a four-digit password to be entered upon startup, keeping your data safe against theft. Never lose waypoints, routes or settings again with TZ Cloud Create your routes at home using TZ Navigator, a web browser*, or TZ iBoat iOS App. Then you can retrieve them from the cloud & download to your TZtouch3. Also, create events on your MFD and retrieve them at home because the data is synchronized automatically & securely to My TimeZero. TZ Cloud also stores marks, routes, boundaries, photos, and catch data! (*Cloud.MyTimezero.com raster planning charts for US only) We gave you something to CHIRP about! TZT9F incorporates a powerful internal 1kW TruEcho CHIRP™ or CW Fish Finder. TruEcho CHIRP Fish Finders transmit pulses across a wide range of frequencies, allowing Furuno’s superior digital signal processing (DSP) to display fish and structure targets with unparalleled clarity, accuracy and resolution. MapMedia Raster and Vector Chart Library Freely choose the charts that fit your individual needs. Easily select either raster, vector or fishing charts, Mapmedia brings an authentic vector and raster chart library to your NavNet TZtouch3. “C-MAP” as well as “Datacore by Navionics” vector cartography are optional charts that can be easily unlocked. Mapmedia cartography integrates cutting edge algorithms with high resolution image processing techniques to deliver a fusion of digital navigation charts and satellite photography. Satellite photography is included in the MapMedia raster and vector charts, simply called Satellite PhotoFusion™. Land areas (zero depth) are completely opaque, displayed as satellite photos on the chart. As the depth increases, the satellite image is merged with the chart data to provide you with added detail on seabed areas in shallow water without losing vital chart information. And finally, CMOR’s high-resolution, shaded-relief bathymetric bottom images help navigators identify suitable locations for fishing and diving. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Deep Impact DI-FFAMP High-power TruEcho CHIRP™ Fishfinder Amplifier The “Deep Impact” DI-FFAMP, a new, high-power TruEcho CHIRP™ Fish Finder Amplifier, designed specifically to work with NavNet TZtouch3. This 2kW or 3kW TruEcho CHIRP™ Fish Finder amp gets you down to the deepest waters to find your catch. Deep Impact boosts your power to a 2/3 kW CHIRP Fish Finder. But if that’s not enough, Deep Impact allows you to connect a 5kW or 10kW transducer with the BT-5.  The system marries CHIRP and CW signals to ensure that as you go deeper, your echoes come back strong and clear. Features: Works with TZtouch3 Internal Fish Finder to amplify it to a 2/3kW TruEcho CHIRPTM Fish Finder Capable of using a 5kW or 10kW transducer (BT-5 required, actual output power from DI-FFAMP is 3kW) Utilizes both CHIRP and CW signals to ensure strong and clear signals in deep water 2 Channel TruEcho CHIRP, 18-225kHz with a maximum depth of 3,000 meters This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.