|
Straight Fuel Vent - Black Polypropylene
A fuel vent, vents air from a fuel tank as it's being filled. This straight fuel vent is patented splash-resistant and corrosion-resistant polypropylene. Meets ABYC ventilation specifications.
Features:
Straight Vent
Color: Black
Material: Polypropylene
Specifications:
Hose Size: (inch) 5/8" inner diameter
Maximum Hull Thickness: (inch) 7/8"
Installation Hole Size (inch) 3/4"
*Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations
|
8.18 |
|
|
316 Stainless Steel Alloy Flush Mount Fuel Vent - Straight Vent
On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets.
Features:
Straight Vent
Specifications:
Hose Size (inch): 5/8" inner diameter
Maximum Hull Thickness (inch): 7/8"
Installation Hole Size (inch): 1-3/8"
*Includes two silicone gaskets
|
26.08 |
|
|
Deck Fills for Pressure Relief Systems - Straight Body - Scalloped Black Plastic Cap
Attwood's Pressure Relief Systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.
Features:
Sold as a single unit
Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap
Automatic nozzle shutoff 4-18 gpm
Black Composite finish
An essential component of VaporTec and SecureStop
Designed and tested to prevent water from entering the fuel system
EPA / CARB Certified
Hinged audible click cap meets EPA requirements
Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards
*Compatible with Ethanol blended fuels
|
73.73 |
|
|
90° P-Trap Fuel Tank Vent - Black with Black Vent Head
This Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness eliminates the need for an anti-siphon loop in the vent hose. It requires a ¾-inch installation hole and can be used with a maximum hull thickness of 9/16 inches.
Features:
Standard Mount - (inch) 5/8" I.D Hose
Reliably helps prevent water from entering the fuel tank
Still allows air to vent freely during normal sea conditions and washdowns
This black vent with a black vent head meets ABYC standards
*Compatible with Ethanol blended fuels.
|
13.12 |
|
|
90° P-Trap Fuel Tank Vent - Black with Stainless Steel Trim Cover
Composite 90-degree P-trap fuel tank vent 66419-3. These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose.
Features:
For 5/8" I.D. hose
(inch) 3/4" install. hole size
(inch) 9/16" max. hull thickness
Vents air from your boat's fuel tank as you fill the fuel tank
Splash-resistant, corrosion resistant
Meets ABYC standard
*Compatible with Ethanol blended fuels
|
11.94 |
|
|
Mercury Fuel Line Kit - 3/8" Dia. x 6' Length with Fuel Demand Valve
This EPA-certified Attwood Mercury Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6
It also includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Hose and tank fittings come with pre-applied thread sealant
For Mercury engines and tanks
Tank Side: Universal Sprayless Quick-Connect
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
69.84 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 6' Length with Sprayless Connectors
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. This kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes an award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant). It includes these fittings: tank fitting 8838TM6; tank end hose fitting 8838HF6.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6 & tank end hose fitting 8838HF6
Multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
Universal for any engines and tanks
Tank Side: Universal Sprayless Quick-Connect
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*It does not include an engine fitting
|
43.42 |
|
|
316 Stainless Steel Alloy Flush Mount Fuel Vent - 90° Vent
On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets.
Features:
90-degree vent
Specifications:
Hose Size (inch): 5/8" inner diameter
Maximum Hull Thickness (inch): 7/8"
Installation Hole Size (inch): 1-3/8"
*Includes two silicone gaskets
|
30.25 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 6' Length with Sprayless Connectors & Fuel Demand Valve
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant) are included as well.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6 & tank end hose fitting 8838HF6
Also, includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine
Tank Side: Universal Sprayless Quick-Connect
Universal for any Engines and Tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
*It does not include an engine fitting
|
62.05 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 12' Length with Sprayless Connectors & Fuel Demand Valve
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 12-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant) are in the kit as well.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6 & tank end hose fitting 8838HF6
It also includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
Tank Side: Universal Sprayless Quick-Connect
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
Universal for any engines and tanks
*It does not include an engine fitting
|
83.93 |
|
|
Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (1998 & Newer)
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. It also includes a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and hose fitting engine end 8896LP6
Universal for any engines and tanks
In-Line Fuel Demand Valve
The kit also has a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
|
46.14 |
|
|
Honda Fuel Line Kit - 3/8" Diameter x 6' Length
This EPA-certified Attwood Honda Fuel Line Kit reliably delivers fuel to your Honda engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Features:
These Attwood Hose Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8900-6
Hose and tank fittings come with pre-applied thread sealant
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance
For Honda engines and tanks
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No Fuel Demand Valve is included in this kit
|
49.10 |
|
|
Universal Fuel Line Kit - 5/16" Diameter x 6' Length
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 5/16-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.
Features:
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines.
Universal for any engines and tanks
Multi-Layer, Low-Permeation Primer Bulb
6 ft. x 5/16 in. Low Permeation Hose
Reliably delivers fuel to your engine
*No end fittings included
|
41.39 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 12' Length with Sprayless Connectors
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 12-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thread sealant) is in the kit as well.
Features:
These Attwood Fittings Are Included: Tank fitting 8838TM6 & tank end hose fitting 8838HF6
Tank Side: Universal Sprayless Quick-Connect
There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
Universal for any engines and tanks
*It does not include an engine fitting
|
63.92 |
|
|
Universal Fuel Line Kit - 3/8" Diameter x 6' Length with Fuel Demand Valve
This EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. A Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine is included as well.
Features:
In-Line Fuel Demand Valve
3/8" x 6' Low Permeation Hose
Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors
Universal for any engines and tanks
Reliably delivers fuel to your engine
This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines
*No end fittings
|
69.05 |
|