Green Replacement LED for Rub Rail Lights F38-6602-1, F38-6602-2, F38-6800D & F38-6810B Replacement navigation lights for Rub Rail-mounted: F38-6602-1 F38-6602-2 F38-6800D F38-6810B *Sold Individually

Red Replacement LED for Rub Rail Lights F38-6602-1, F38-6602-2, F38-6800D & F38-6810B Specifically for Rub Rail Lights F38-6602-1, F38-6602-2, F38-6800D and F38-6810B. Replacement Navigation Lights for Rub Rail-Mounted: F38-6602-1 F38-6602-2 F38-6800D F38-6810B *Sold Individually

Safety First when it comes to Trailer Lighting   Safety is important, not only on the water, but on the road going to and coming from the water. If your trailer is more than a few years old, most likely you have had or are having some issues with the lights and the electrical system on your trailer. Fortunately, most issues are pretty easy to fix.   The first thing to do is to test the lights by hooking up to the vehicle harness and checking all lights to make sure they are bright and working. If any are dim or not functioning, connect a tester to the vehicle harness to see if there might be an issue with the electrical source. Cleaning the connectors of the harness on both the vehicle and trailer side is critical, and can easily be done with a can of electrical connector spray and a fine wire brush. Also, clean the ground contact and tighten the ground wire.   Make sure to check the ground screw and replace it if it is corroded. Most bulbs are easily replaceable by simply twisting them to remove and install them. You can also clean up corroded sockets by gently sanding away the corrosion with fine sandpaper. It's possible you may have to replace wiring, which can be purchased as part of a complete kit that includes new lights, connectors, and lenses. We suggest if you do not have LED light on your trailer to switch over to them. Led lights are brighter, more efficient and has multiply bulbs so you will never have a taillight completely unlit if one bulb burns out.   CLR Marine carries trailer lights and lighting kits, which are complete with license plate holder, wiring and side lights. Along with any other trailer accessory you may need.       Specials   Closeouts    Remanufactured    Rebates  

Rub Rail

Rigid Vinyl Flex-Core Rub Rail 2" x 7/8" - Frosty White 60' TACO Marine’s latest Rub Rail innovation is an improved design of our most popular rigid PVC shape with a lightweight, high-density inner core. This allows for easier handling, faster one-piece installation, improved dimensional stability, and production run consistency. Features: Lightweight Easy handling and installation Solid, rigid PVC cap stock exhibits traditional surface characteristics, appearance, and impact properties Continuous coil eliminates butt joints around gunwale, with improved bending characteristics and the ability to cold form Vacuum calibration tooling allows for tighter dimensional tolerance and sizing consistency High-density core offers improved shock-absorbent impact resistance Made in the USA 5-year limited warranty Specifications: Color: Frosty White Length: (feet) 60' Insert: S11-4511 required Drilled and countersunk for #8 screw on 8-inch centers

Rigid Vinyl Flex-Core Rub Rail 1.58" x .635" - Frosty White 60' TACO Marine’s latest Rub Rail innovation is an improved design of our most popular rigid PVC shape with a lightweight, high-density inner core. This allows for easier handling, faster one-piece installation, improved dimensional stability, and production run consistency. Features: Ideal for boats up to 40 feet long Lightweight, easy handling and installation Solid, rigid PVC cap stock exhibits traditional surface characteristics, appearance, and impact properties Continuous coil eliminates butt joints around gunwale, with improved bending characteristics and the ability to cold form Vacuum calibration tooling allows for tighter dimensional tolerance and sizing consistency High-density core offers improved shock-absorbent impact resistance Made in the USA 5-year limited warranty Specifications: Color: Frosty white Length: (feet) 60' Insert: S11-4511 required (sold separately) Drilled and countersunk for #8 screw on 8-inch centers

Rigid Vinyl Flex-Core Rub Rail 2" x 7/8" - Black 60' TACO Marine’s latest Rub Rail innovation is an improved design of our most popular rigid PVC shape with a lightweight, high-density inner core. This allows for easier handling, faster one-piece installation, improved dimensional stability, and production run consistency. Features: Lightweight Easy handling and installation Solid, rigid PVC cap stock exhibits traditional surface characteristics, appearance, and impact properties Continuous coil eliminates butt joints around gunwale, with improved bending characteristics and the ability to cold form Vacuum calibration tooling allows for tighter dimensional tolerance and sizing consistency High-density core offers improved shock-absorbent impact resistance Made in the USA 5-year limited warranty Specifications: Color: Black Length: (feet) 60' Insert: S11-4511 required Drilled and countersunk for #8 screw on 8-inch centers

Submersible LED Low-Profile Trailer Light Kit Ideal replacement or upgrade for most trailers. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards. Kit Includes: Includes (2) multi-functional (stop/tail/turn) submersible low-profile LED trailer lights  License plate bracket  Wiring harness and installation hardware

Large SuproFlex Rub Rail 2.5" x 1" - Black SuproFlex is a lightweight, ultra-flexible rub rail that saves you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. This rub rail is available in a variety of sizes and colors, and pairs with TACO’s patented Flex Chrome Insert, which can also be customized to any builder’s color preference. SuproFlex Rub Rail is ideal for any boat up to 65’. Add the ultimate coverage to the cap/hull joint of your boat with the SuproFlex Rub Rail. This co-extruded, ultra-flexible vinyl profile features a longer leg for superior hull protection. Available now to boat builders! SuproFlex Rub Rail is lightweight and super flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. This rub rail is available in a variety of sizes and colors, and pairs with TACO’s Flex Chrome Insert, which can also be customized to any builder’s color preference. Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Insert color can be customized to the builder's preference OEM only Made in the USA 5-year limited warranty

Replacement Bulbs Spot Light Replacement H3 Halogen Bulb 12V WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Replacement Bulbs Spot Light Replacement H3 Halogen Bulb 24V WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

BURKS T310GA5-1 1/4, CENTRIFUGAL PUMP 3PH 1HP TEFC Close Coupled, 60 Hz, Three Phase, 3500 RPM, 1 Horsepower, TEFC Motor Enclosure, Frame Size 56J.   UNSPSC Code: 40150000

Sierra replacement bellows Mercruiser engines.

Single Row Slimline LED Light Bar - 5-1/2" SPECS Input Voltage: 10–30V DC Wattage: 9W (3–3W OSRAM LEDs) Raw Lumens: 720 LUX @ 10M: 10 Color Temperature: 6000K Beam Pattern: 90° Flood CONSTRUCTION Housing Material: Powder Coated Aluminum Housing Color: Black Membrane: Gore™ Lens Material: PC Mounting Bracket: Die–cast Aluminum Mounting: Side and Bottom Hole Dimensions:  Brackets turned inward – 5.25" Brackets turned outward – 7.25" Mounting Bolt Drill – .25" Height of Light Bar Itself: 2" Depth of Light Bar Itself: 2" Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: –40°C to +60°C Current Consumption: .4 amps @ 13.8 volts IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Polished Stainless Steel Table Pedestal 3" OD x 25-1/2" L All of TACO's Z76-Series table pedestal columns are tapered on the bottom for a secure fit into the base while also allowing for easy removal and storage. Features: Available in satin anodized aluminum rib design or polished stainless steel  Available in three different lengths Custom heights available based upon minimum order quantities 5-year limited warranty Specifications: Finish: Polished Taper: Single Material: Stainless Steel Length: 25-1/2"