Take-Apart Hinge Allows engine boxes, hatches, etc. to be easily removed, or laid back completely when open for full access. Size:3-7/8" x 2-1/16" Fastener: #10(4) Material: Chrome Plated Brass

Description: 316 S.S. Hinged Chain & Rope Deck Pipe Inside diameter - 3-7/8" x 2-1/2" Flange - 4-1/8" x 2-7/8" Fastener - #12(4) Max. Rope Diameter - 1-1/4" Slide top to right to lock into place.

Switch Ball Trailer Ball Set - 1-7/8" & 2" Balls - 1-7/8" x 2-1/4" Shank CURT Switch Ball trailer balls are a breakthrough in trailer ball technology. As a result of CURT innovation and engineering genius, switch balls offer the ultimate in convenience and reliability for a variety of light-duty and medium-duty towing applications. Essentially, a CURT Switch Ball is a trailer ball shank with a removable head. With its exclusive J-groove design, the switch ball trailer ball allows different heads or ball sizes to be placed on the shank to accommodate different coupler sizes. This means there is no need to switch between ball mounts or even own a second ball mount to fit an additional trailer. When you need to make the switch, simply twist the switchball head, lift it off, and twist on another. The J-groove ensures a solid hold on your trailer while still allowing for easy removal of the trailer ball without tools or pins. This CURT Switch Ball trailer ball set comes with two ball attachments. Ball 1 features a ball diameter of 1-7/8" and a ball capacity of 3,500 lbs. Ball 2 has a 2" ball diameter and a ball capacity of 6,000 lbs. The shank measures 2-1/4" long and 1" in diameter. CURT constructs these interchangeable hitch balls from premium-grade steel for strength and gives them a bright nickel-chrome finish for a long life. To ensure your safety and provide you with a tow ball you can depend on, CURT switch balls are independently tested in accordance with SAE J684. Features: Fits 1-7/8" or 2" couplers and accepts up to 6,000 lbs. GTW (depending on ball) Exclusive 'J' groove design ensures a secure system No tools, coins, or pins are required for trailer ball installation Shank bears the weight, freeing the coupler from friction and binding Constructed from high-strength steel Protected by a premium-grade nickel chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Independently tested in accordance with SAE J684 for safety and proven safe Specifications: Ball 1 Diameter and Capacity: 1-7/8 in. - 3,500 lb. Ball 2 Diameter and Capacity: 2 in. - 6,000 lb. Finish: Chrome Hub Warehouse: D25 Neck Diameter: 1 in. Rise: 0 in. Shank Diameter: 1 in. Shank Length: 2-1/4 in. U.S. Patent (#): 5,169,168 Canadian Patent (#): 1,325,445 Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Shortside Door Hinge Size:1-3/8" x 2-1/4" Fastener: #10(5) Material: Black Nylon

Shortside Door Hinge Size:1-3/8" x 2-1/4" Fastener: #10(5) Material: White Nylon

Hatch Handle Latch - 3-1/8" x 2-11/16" Constructed of sand cast brass with a chrome plated finish. These Hatch Handle Latches are ideal for use on doors, hatches, lazarettes, and dock boxes. Handle pivots out to open hatches and lays flush when not in use for a clean appearance. Adjustable locking arm adds additional security. Installs with four #8 FH fasteners (not included). Once installed, the locking arm can be trimmed to length. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bow Shackle - 3/8" Pin - 2-1/16"L x 13/32"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Drilled shackle pin head for seizing wire

Impeller Kit - 9 Blade - Nitrile - 3-3/4" Diameter x 2-1/2" W, 1" Shaft Diamter Features: Material: Nitrile Drive Type: Single Flat Drive Number of Blades: 9 Dimensions: Diameter:3-3/4", Shaft Diameter:1", Shaft Width:2-1/2" Insert Material:Brass Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance. Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces. Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Take-Apart Hinge - Left Allows engine boxes, hatches, etc. to be easily removed, or laid back completely when open for full access. Size:3-5/8" x 1-1/2" Fastener: #10(4) Material: 316 Stainless Steel

Take-Apart Hinge - Right Allows engine boxes, hatches, etc. to be easily removed, or laid back completely when open for full access. Size:3-5/8" x 1-1/2" Fastener: #10(4) Material: 316 Stainless Steel

Top-Mounted Flag Pole Socket CP/Brass - 3/4" ID Features: CP/Brass Top Mounted Flag Pole Socket Tube I.D. - 3/4" Base - 2" Height - 1-3/4" Fastener - #6(3)

Description: Plate: 3/4" x 2-1/4" Material: 304 Stainless Steel Stock: 3/8" Eye Ring Diameter: 1" Thread Length: 2-1/2"

T-Strap Hinge Length:7-3/4" Width:3-7/8" Fastener:#12(8) Material: 316 Stainless Steel

3-7/8" Snap Shackle with Swivel & Clevis Pin Features: HR Forged snap shackle (Grade 17.4 PH stainless steel) with clevis pin swivel Free rotation of the snap shackle thanks to the swivel eye The plunger pin is set captive into the hook and cannot become detached Excellent working and breaking loads Easy to open by pulling the plunger pin (possibility to attach a lanyard) Applications: Snap shackle applications

Horn Cleat - Nylon - 98mm(3-7/8") Long Features: Rope Ø: 5mm(3/16") U.V. Satbilized Nylon