|
SuproFlex Small Stainless Steel End Cap
Complete your SuproFlex V11-9960 Rub Rail installation with this stainless steel Type-316 mirror polish finished end cap.
Features:
Caps Rub Rail at the stern of the boat for a finished look
Ensures inserts stay intact
Stainless-steel marine-grade Type-316L
5-year limited warranty
|
20.83 |
|
|
Side Entry CableClam w/Stainless Steel Dress Cap
Provides a waterproof side entry for antenna cables without requiring removal of the factory installed connector. Stainless steel dress cap conceals mounting hardware and matches stainless steel deck fittings.
Features:
Simple one-piece design for easy side mount installations
Low profile, contoured edge reduces the risk of tangling lines
A polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UV
Includes all fasteners
For use above the waterline only
Specifications:
Max Cable Diameter: 0.28in (7.11 mm)
Max Connector Diameter: 1in (25.4 mm)
Dress Cap Material: 316 Stainless Steel
Ring Material: UV-Stabilized Thermoplastic
Seal Material: UV-Stabilized Buna-N Rubber
Weight: 0.50lb (0.23 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
10.39 |
|
|
CableClam w/Stainless Steel Dress Cap - 0.68"
Features:
Pre-drilled and slit rubber seals for easier installation.
A polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UV
Stainless steel fasteners included
For use above the waterline only
Specifications:
Max Cable Diameter: 0.31in (7.87 mm)
Max Connector Diameter: 0.68in (17.27 mm)
Dress Cap Material: 316 Stainless Steel
Mounting Hole: Accept #6 x 7/8" Screws
Ring Material: UV-Stabilized Thermoplastic
Seal Material: UV-Stabilized Buna-N Rubber
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
22.12 |
|
|
CableClam w/Stainless Steel Dress Cap - 0.83"
Features:
Pre-drilled and slit rubber seals for easier installation.
A polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UV
Stainless steel fasteners included
For use above the waterline only
Specifications:
Max Cable Diameter: 0.44in (11.18 mm)
Max Connector Diameter: 0.83in (21.08 mm)
Dress Cap Material: 316 Stainless Steel
Mounting Hole: Accept #6 x 7/8" Screws
Ring Material: UV-Stabilized Thermoplastic
Seal Material: UV-Stabilized Buna-N Rubber
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.81 |
|
|
CableClam w/Stainless Steel Dress Cap - 1.40"
Features:
Pre-drilled and slit rubber seals for easier installation.
A polished stainless steel dress cap conceals mounting hardware, matches other deck hardware and offers protection from UV
Stainless steel fasteners included
For use above the waterline only
Specifications:
Max Cable Diameter: 0.56in (14.22 mm)
Max Connector Diameter: 1.40in (35.56 mm)
Dress Cap Material: 316 Stainless Steel
Mounting Hole: Accept #6 x 7/8" Screws
Ring Material: UV-Stabilized Thermoplastic
Seal Material: UV-Stabilized Buna-N Rubber
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
27.53 |
|
|
Rail Mount Stainless Steel Fender Holder Dual - 7.5"
The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.
|
79.39 |
|
|
Rail Mount Stainless Steel Fender Holder Dual - 9.5"
The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.
|
95.28 |
|
|
Rail Mount Stainless Steel Fender Holder Dual - 11.5"
The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.
|
104.80 |
|
|
Latch-tite™ Stainless Steel 2-7/16" Square
Latch-tite™ handles have been designed to provide high performance, trouble free use in the most hostile conditions. The latches and all shafts and tongues are made from cast type 316 stainless steel. Square design enhance any marine craft. Latches can be installed vertically or horizontally, making them ideal for any opening.
The Latch-tite™ series is for applications that require a heavy-duty, high performance construction and high quality appearance.
Features:
Cast stainless steel
Type 316
Deluxe polish finish
Unique stainless steel shaft with bushing and twin Nitrile “O” rings for greater protection against water penetration
Over center anti-rattle handles provide quiet operation
Concealed fasteners
Mold plugs available upon request for boat builders
Adjustable depth
Specifications:
Dimensions: 2-7/16" x 2-7/16"
Edge Thickness: 5/32"
Adjust Depth: 1-3/4"
Hole Size: 2-1/16"
Overall Depth: 2-5/16"
Screw: #8
|
50.20 |
|
|
Mooring Fender Lock Kit - Stainless Steel Pair
Stainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of the kit then twist into the deck plate to secure fenders to the gunwale. No need to untie and retie fenders when moving or docking; just twist the key for installation or removal.
Features:
Accepts up to 1/2-inch diameter fender line
Stainless steel construction and includes mounting hardware
Includes two flush-mount stainless steel mounting plates and two stainless steel keys
Quickly and easily install or move fenders when mooring
Dimensions:
Width: (inch) 2"
Height: (inch) 1"
*Line sold separately
|
7.60 |
|
|
MS-AM402 2 Channel Marine Amplifier - 400W
Features:
Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection.
Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability.
Class-AB Design - The 400 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat.
Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life.
RCA Line Out - A pass through the RCA output enables linking of multiple amplifiers for enhanced system performance.
2 Channels - Capable of powering 2 speakers, a sub (bridged) or 4 speakers in parallel.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
186.82 |
|
|
MS-AM504 4-Channel Marine Amplifier - 500W
Features:
Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection.
Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability.
Class-AB Design - The 500 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat.
Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life.
RCA Line Out - A pass through RCA output enables linking of multiple amplifiers for enhanced system performance.
4 Channels - Capable of powering 4 speakers, a sub and a pair of speakers or 8 speakers in parallel (2 speakers per channel in parellel @ 2 Ohms).
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
277.36 |
|
|
DTX Anchor - Stainless Steel - 14lb
The DTX anchor fills the gap between the existing galvanized and stainless Delta® anchors.
Made from 316 stainless steel, the DTX anchors feature exceptional anti-corrosion performance and the enhanced aesthetics that stainless anchors offer. Utilizing lead ballast encapsulated within the tip of the anchor to achieve the perfect center of gravity, the DTX offers the initial bite and holding reliability that users of our Delta® anchors have come to expect.
Features:
Self-launching
Ordinary holding power
Lead-ballasted tip for fast setting
Technical Specifications:
Material - Stainless Steel
Recommended Chain Size - 1/4"
Weight - 14lb (6kg)
In the Box:
Anchor
Instruction manual
*Sold as an Individual
|
481.78 |
|
|
DTX Anchor - Stainless Steel - 13lb
The DTX anchor fills the gap between the existing galvanized and stainless Delta® anchors.
Made from 316 stainless steel, the DTX anchors feature exceptional anti-corrosion performance and the enhanced aesthetics that stainless anchors offer. Utilizing lead ballast encapsulated within the tip of the anchor to achieve the perfect center of gravity, the DTX offers the initial bite and holding reliability that users of our Delta® anchors have come to expect.
Features:
Self-launching
Ordinary holding power
Lead-ballasted tip for fast setting
Technical Specifications:
Material - Stainless Steel
Recommended Chain Size - 1/4"
Weight - 13lb (5.5kg)
In the Box:
Anchor
Instruction manual
*Sold as an Individual
|
476.87 |
|
|
Claw Anchor - Stainless Steel - 22lb
Designed based on anchors used to secure oil rigs in the North Sea. The Claw anchor is constructed of high-grade stainless steel. The Claw anchor sets effortlessly and holds in a variety of sea beds and stows easily on the bow roller of most boats.
Features:
Suitable for use on various sea beds
Bow roller storable
Technical Specifications:
Material - Stainless Steel
Recommended Chain Size - 5/16"
Weight - 22lb (10kg)
In the Box:
Anchor
Instruction manual
*Sold as an Individual
|
951.70 |
|