Aluminum Ribbed Table Pedestal - 2-3/8" O.D. - 27-1/2" Length All columns are tapered on the bottom to submit a secure fit into the base while allowing for easy removal and storage. Features and Benefits Dual Taper Ribbed Satin Anodized Finish

Aluminum Ribbed Table Pedestal - 2-3/8" O.D. - 26" Length All columns are tapered on the bottom to submit a secure fit into the base while allowing for easy removal and storage. Features and Benefits Dual Taper Ribbed Satin Anodized Finish

Aluminum Ribbed Table Pedestal - 2-3/8" O.D. - 30-3/4" Length All columns are tapered on the bottom to submit a secure fit into the base while allowing for easy removal and storage. Features and Benefits Dual Taper Ribbed Satin Anodized Finish

Aluminum Clamp-on Rod Holders Model:  RA5205SL Color:   Silver Fits:      2.375" O.D. Pipe Mount:  Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.

Spring Clip Length:2-3/8" Extension:Up to 1-1/4" Fastener:#10(2) Material:304 Stainless Steel

Top Support Bracket - Rail Mount 1" Rail - 2-3/8" Mast With Edson's Rail Support Bracket for 2-3/8" Standard Radar Mast - 1-inch Railing is designed to give any Edson 2-3/8” Radar Pole more support, comes complete with two Stainless Steel U-Bolts and two Starboard Rail Mount Brackets to provide a secure, rattle-free installation. Must be mounted within 1” of the railing. This Surface Mount gives you the ability to support the mast against a bulkhead, cabin side or vertical transom.

Table Support - Surface Mount - Fits 2-3/8" Pedestals Aluminum - Brite Anodized Table support options allow for fixed table tops receiving a dual tapered top column. The 60mm system is ideal for smaller diameter table tops in particularly tight quarters. Features and Benefits Bases are tapered for secure fit Designed for fixed table tops and dual taper columns Base Outside Diameter: 7"

Table Support - Flush Mount - Fits 2-3/8" Pedestals Aluminum - Brite Anodized The Zwaardvis table pedestal systems provide a wide array of base options to cover most applications. All bases are designed to accept the innovative Zwaardvis tapered column for convenient removal and storage. Features and Benefits Bases are tapered for secure fit Three year limited warranty Base Outside Diameter: 7-1/16"

SWIVL-EZE LakeSport 2-3/8" Extension Post - 13" High Fixed height lake sport Series pedestal seat extension post 238613L1 is 13 inches high. A great extension post for 238 lake sport seat mounts and socket bases. For use on fishing, pontoon, or cruising boats to provide seat elevation. Attwood develops high-value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions. Features: Hard anodized, corrosion-resistant aluminum seat pedestal The locking latch has a low-friction ramped bottom for smooth Insertion into the base The release button operates smoothly requiring less effort to unlock post from 238 series base SELECT from Lake Sport series posts to get the perfect height for your boating fun All Springs are stainless steel Height measured from deck to top of seat mount

Taper-Lock™ Trac-Lock™ 2-3/8" Locking Seat Mount 2-3/8″ post mount with bushing for snug fit. Made of high-strength aluminum, with powder coat finish. Centrally located locking handle, easy to reach with left or right hand. Features: Rotates 360° For use with 2-3/8″ fixed height pedestals Post Adds 3/4″ To Height Of Pedestal

MagicAir® Deluxe - 7/8" O.D. Adapter Standard replacement 7/8" O.D. Adapter for the MagicAir® and DataVac® line of products. Catalog P/N MVC-211C-AS *Sold as an Individual WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Taper-Lock™ Trac-Lock™ 2-3/8" Non-Locking Seat Mount Features: 7″ x 7″ Non-Locking Trac-Lock™ Swivel High-Strength Aluminum With Powder Coat Finish Rotates 360° Fits 2-3/8″  Post Adds 3/4″ To Height Of Pedestal

MagicAir® Deluxe - 3/16" O.D. Adapter Standard replacement 3/16" O.D. Adapter for the MagicAir® and DataVac® line of products. Catalog P/N MVC-211D-AS *Sold as an Individual WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

SWIVL-EZE LakeSport 2-3/8" Seat Mount with Friction Control - Aluminum LakeSport Seat Mount is 2-3/8 inch Locking AO-Aluminum, with Friction Control, 3 Degree Tilt, ABYC Code - AO, Installed Height - 5/8 inch, Bulk Packaging. Hardware is Engineered to Exceed ABYC Standards Type A/Operator Models lead the industry with these features: Ergonomic positive-locking handles with stainless steel components inch-Slot inch locking channels (on adjustable-height models) are the safest manual adjustment available. All Models are reinforced for strength: All LakeSport posts are swaged and welded to the bases Bases have underside ribs for superior strength.

Bushing for 2-3/8″ Swivel Replacement handles and assemblies for air-ride pedestals, seat mounts, etc. Features: Replacement and service parts for Trac-Lock™ seat mounts *5-Year Limited Warranty