|
Gas Tank Vent w/Swivel Elbow - Chrome/Black
Features:
Chrome Plated Zinc Alloy Cap with Zinc Alloy Elbow
Black or White Polymer Splash Guards
Removable 30 Mesh Stainless Steel Wire Screen Flame Arrestor - for use with fuel applications
Design Allows Elbow to be Rotated to any Position
Specs:
For Hose Size: 5/8"
Max. Hull Thickness: 1"
|
16.74 |
|
|
Gas Tank Vent
Chrome Plated Zinc Alloy with Black Polymer Splash Guard
Removable 30 Mesh Stainless Steel Wire Screen Flame Arrestor - for use with fuel applications
Hose Size: 5/8"
Max Hull Thickness: 3/4"
|
15.94 |
|
|
Stainless Steel Flush Mount Gas Tank Vent 5/8" Hose - Straight
The Flush Mount Gas Tank Vent provides the needed air flow to maintain proper fuel flow while filling and during use. Vents compensate for changes in tank level due to consumption, as well as temperature related expansion and contraction. Designed to prevent vacuum build-up during use, which can disrupt fuel delivery they also double as a pressure release valve for the gas tank. Helps prevent fuel spills, blow-back, and ensures fumes vent outboard instead of inside the boat. An integral 5/8" hose barb securely connects vent hose. Constructed of corrosion resistant investment cast 316 stainless steel.
|
25.91 |
|
|
Gasoline Fume Detector w/Blower Control - Chrome Bezel - 12V
The Single Channel Gasoline Fume Detector is an effective means to monitor gasoline fumes in an engine compartment, fuel tank storage area or in other areas where gasoline fumes might accumulate.
Complete system includes Blower Control Relay, easy installation and precise monitoring.
Features:
Simple Installation
Audible and visual alarm to indicate LEL (Lower Explosive Level) presence
Monitors one (1) single area
Automatically activates bilge blower
Technical Specifications:
Operating Temperature: -40° to 185°F (-40° to 85°C)
Current Draw Nominal - 55mA
Current Draw Maximum - 95mA
Operating Voltage - 9 to 30V DC
Alarm Horn - 68 dB
Display Style - Round with Chrome Bezel
Display Dimensions - 2-3/16" (5.6 cm) round
Cutout Dimension - 2-1/16" (5.2 cm) round hole
In the Box:
Fume Detector
Fuel sensors x one (1)
20' Extension Cable x one (1)
Blower Relay x one (1)
Instruction manual
*Sold as an Individual
|
307.50 |
|
|
Tap with Swivel Spout - Chrome
This cold-water tap with a swivel spout now features a 1/4 turn ceramic valve.
Specifications:
Water Connection: 1/2 in. NPS-M
Material: Chrome-plated brass body and spout with chrome plated ABS plastic knobs
Mounting Hole: 7/8 in.
Shipping Weight: 4 lbs.
*The "P" within the part number indicates retail packaging
|
88.09 |
|
|
0540 Gas Fill/Vent for 1-1/2" Hose - Angled Neck
Features:
Angled Neck
Chrome Plated Bronze Cap
Black Polymer Body
Stainless Steel Bead Chain
Integral Tank Vent with Flame Arrestor and Anti Surge Valve
Deck Plate Key Included
|
51.20 |
|
|
Gas Tank Base with 1" Ball for Honda, Suzuki, KTM, Yamaha and Victory Motorcycles
The RAM® Mounts Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of your Honda, Suzuki, KTM, Yamaha and Victory motorcycles. We include the hardware you need to mount to the fill port as well.
Included Hardware:
Qty. 3 M6-1.0 x 25MM Socket Head Cap Screw
Qty. 4 M5-0.8 x 45MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 35MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 25MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 20MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 16MM Socket Head Cap Screw
Qty. 4 M5 Stainless Steel Flat Washer
Qty. 3 M6 Stainless Steel Flat Washer
Material:
Powder Coated Marine Grade Aluminum & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
28.57 |
|
|
Gas Tank Base with 1" Ball for BMW and Kawasaki Motorcycles
The RAM® Mounts Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of your BMW or Kawasaki motorcycles. We include the hardware you need to mount to the fill port as well.
Included Hardware:
Qty. 4 M5-0.8 x 40MM Socket Head Cap Screw
Qty. 3 M5-0.8 x 25MM Socket Head Cap Screw
Qty. 4 M5 Stainless Steel Flat Washer
Material:
Powder Coated Marine Grade Aluminum & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
31.72 |
|
|
90° P-Trap Fuel Tank Vent - Black with Stainless Steel Trim Cover
Composite 90-degree P-trap fuel tank vent 66419-3. These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose.
Features:
For 5/8" I.D. hose
(inch) 3/4" install. hole size
(inch) 9/16" max. hull thickness
Vents air from your boat's fuel tank as you fill the fuel tank
Splash-resistant, corrosion resistant
Meets ABYC standard
*Compatible with Ethanol blended fuels
|
11.94 |
|
|
90° P-Trap Fuel Tank Vent - Black with Black Vent Head
This Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness eliminates the need for an anti-siphon loop in the vent hose. It requires a ¾-inch installation hole and can be used with a maximum hull thickness of 9/16 inches.
Features:
Standard Mount - (inch) 5/8" I.D Hose
Reliably helps prevent water from entering the fuel tank
Still allows air to vent freely during normal sea conditions and washdowns
This black vent with a black vent head meets ABYC standards
*Compatible with Ethanol blended fuels.
|
13.12 |
|
|
Water Inlet Fitting
(0499)
Chrome Plated Bronze
Standard Female Swivel Hose Connector
Black Plastic Watertight Plug
Stainless Steel Bead Chain
For obtaining water at dockside
Pipe Size: 1/2"
O.D. Flange: 2-3/4"
|
97.19 |
|
|
90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent Head
This Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used with a maximum hull thickness of 1 inch.
Features:
This black vent with a stainless steel vent head meets ABYC standards
Flush Mount - 5/8" I.D. hose
(inch) 1-3/8" install. hole size
(inch) 1" Max. hull thickness
*Compatible with Ethanol blended fuels
|
32.90 |
|
|
Marine Holding Tank Vent Filter Kit
Camco's Marine Holding Tank Vent Filter Kit helps eliminate odors that are released from your boat's holding tank vent. It features granular activated carbon (GAC) for maximum odor control. This allows odorous gases to be properly filtered, helping absorb any holding tank smells. Kit installs easily to your boat's vent hose. The product includes a filter, mounting bracket, and fittings for standard garden hose connections, 3/4-inch, and 5/8-inch barbed hose connections. The mounting bracket measures 12-1/8-inches (L) x 2-3/4-inches (D) x 2-3/4-inches. The filter will last an entire boating season or more, depending on the usage.
Features:
Helps Eliminate Odors: Kit helps eliminate odors that are released from your boat's holding tank vent
Provides Maximum Odor Control: Filter contains granular activated carbon (GAC) for maximum odor control
Includes: A filter, mounting bracket, and fittings for standard garden hose connections, 3/4-inch, and 5/8-inch barbed hose connections
Easy to Install: Installs easily to your boat's vent hose
Dimensions: Mounting bracket measures 12-1/8-inches (L) x 2-3/4-inches (D) x 2-3/4-inches
Note: The filter will last an entire boating season or more, depending on the usage
|
44.32 |
|
|
Gasoline Fume Detector w/Blower Control - Black Bezel - 12V
The Single Channel Gasoline Fume Detector is an effective means to monitor gasoline fumes in an engine compartment, fuel tank storage area or in other areas where gasoline fumes might accumulate.
Complete system includes Blower Control Relay, easy installation and precise monitoring.
Features:
Simple Installation
Audible and visual alarm to indicate LEL (Lower Explosive Level) presence
Monitors one (1) single area
Automatically activates bilge blower
Technical Specifications:
Operating Temperature: -40° to 185°F (-40° to 85°C)
Current Draw Nominal - 55mA
Current Draw Maximum - 95mA
Operating Voltage - 9 to 30V DC
Alarm Horn - 68 dB
Display Style - Round with Chrome Bezel
Display Dimensions - 2-3/16" (5.6 cm) round
Cutout Dimension - 2-1/16" (5.2 cm) round hole
In the Box:
Fume Detector
Fuel sensors x one (1)
20' Extension Cable x one (1)
Blower Relay x one (1)
Instruction manual
*Sold as an Individual
|
292.50 |
|
|
BoatBuckle Kwik-Lok Gas Tank/Battery Box Strap 1" x 4'
The Battery Box Tie-Down features a nylon buckle,while the Gas Tank Tiedown features a zinc coated steel buckle.Both made of durable 1.5" polypropylene webbing and are packed with two polypropylene footmen loops and four stainless steel screws,for permanent floor mounting.
Product Info:
Item No.: F05343
Dimensions: 1" x 4'
UOM: Each
Color: Black
Package: Clam
|
14.18 |
|