|
Rail Molding
Use for a beautiful smooth finish to your project. Constructed with 100% Solid Teak.
Length: 5'
|
48.32 |
|
|
Teak Bunk Rail Molding
Use for a beautiful smooth finish to your project. Constructed with 100% Solid Teak.
Length: 5'
|
85.63 |
|
|
Large SuproFlex Rub Rail 2.5" x 1" - Black
SuproFlex is a lightweight, ultra-flexible rub rail that saves you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. This rub rail is available in a variety of sizes and colors, and pairs with TACO’s patented Flex Chrome Insert, which can also be customized to any builder’s color preference. SuproFlex Rub Rail is ideal for any boat up to 65’.
Add the ultimate coverage to the cap/hull joint of your boat with the SuproFlex Rub Rail. This co-extruded, ultra-flexible vinyl profile features a longer leg for superior hull protection. Available now to boat builders! SuproFlex Rub Rail is lightweight and super flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. This rub rail is available in a variety of sizes and colors, and pairs with TACO’s Flex Chrome Insert, which can also be customized to any builder’s color preference.
Features:
Ideal for boats up to 65'
Co-extruded to provide two levels of hardness
Rigid backing and soft durometer front
Shock-absorbing channels for higher impact resistance
Lighter weight than traditional vinyl rub rail
Requires no pre-forming and minimal heating
Insert color can be customized to the builder's preference
OEM only
Made in the USA
5-year limited warranty
|
619.55 |
|
|
Cat Pump 30611 Rail Kit 5 Frame
Mount pump onto a secure, horizontal base with either rail assemblies or direct mount assemblies.
Rail assembly, direct mount assembly or complete mounting assembly not included with pump unless otherwise noted.
Use direct mount assembly when mounting block or flat base is used or pulley extends over edge of base.
For Models: 333, 430, 323, 390, 310 - 350S, 311 - 357, 530, 550, 700, 740, 760, 781/K, 784, 786, 31, 45, 60, 5CP2120W-2150W, 5CP3120/3120CSS, 5CP5120-5140CSS, 5CP6120 - 6190, 5CPQ6221 - 6251
|
39.49 |
|
|
Little Giant Sump Pump 505055
Little Giant WRS-5 Basin Sump Pump
Basin features 5 Gallon Polypropylene lightweight Tank that is corrosion-resistant it is designed with O-rings for a water tight seal the Cover includes removable filter for easy cleaning. The Cover includes 1/1/2" FNPT (38 mm) discharge and intake opening, and 2" FNPT (5 cm) vent opening, IAPMO listed, Pre-assembled, ready to install
&505055 Removes water from laundry trays, lavatory sinks, wet bar sinks, dehumidifiers, air conditioners (condensate), water softeners, etc. Installs above floor, no need to dig a sump. Unit is pre-assembled and ready to install.
|
543.75 |
|
|
GP1900-09 SailPod Pre-Cut for Raymarine c95/c97/e95/e97 for 9.5" Wide Guard
SailPods are for mounting a single Radar or Chartplotter at the helm. Navigation at your finger tips. "Where you need it...when you need it." Sail Pods are the smart solution for mounting your Radar or Chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires. Nickel Chrome plated tamperproof screws provide a little bling and a lot of security. Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions. A SailPod is best mounted on a Single Bend AngleGuard or use a Double Bend AngleGuard to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.
Structural Rigidity
The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it's potentially damaging effects on plastic. These NavPods are really strong!
Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.
Nickel Chrome Plated Stainless Steel
We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!
Commitment to Quality
We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.
SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.
|
383.99 |
|
|
GP1170-05 SystemPod Pre-Cut for Raymarine es127/es128 2 Instruments for 9.5" Wide Guard
Instrument Cut Out: 3.6" Holes
The NavPod GP1170 Series for 9.5" Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards.
The Hi-Gloss Material
NavPods are manufactured with a custom co-extruded acrylic capped
ABS material. We use the absolute best UV resistant material that provides a
very high gloss white finish that matches gel-coated fiberglass. The Gen3
enhancements now include a thicker gauge material that improves strength and
provides for better structural rigidity.
The Waterproof Seal
All NavPods are manufactured with a double gasket system providing
an excellent watertight seal between the front and back of the NavPod for
protection of your Marine Electronics. NavPods are made to withstand the
harshest of wet offshore boating conditions. Gen3 enhancements include a
thicker external silicone gasket with improved flush fit. The internal EPDM
gasket is now 50% thicker and is not subject to "compression set" like many
rubber compounds. This is important when you need to open the NavPod in the
future to service your electronics.
The Nickel Chrome Plated Screws
We use all stainless steel mounting hardware that is supplied with
each NavPod. Large round head tamperproof screws have deeper sockets for the screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof The Manufacturing Process
Heavy-gauge thermoforming is considered an art since many processes
come into play. It all starts with the design and development of the
tooling. We are fortunate to have experienced in-house design engineers who
utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to centers to produce quality tools with
precision tolerances.
Our Commitment to Quality
We are committed to producing the best possible waterproof housing
for Marine Electronics. Now with two decades of experience under our belt,
we are confident you will have years of trouble free service and a long
lasting high gloss finish. We will stand behind our commitment by now
offering a 10-year warranty on all new Gen3 NavPods.
*See Literature tab for an image with dimensions
|
462.53 |
|
|
GP1203 SailPod Precut for Raymarine c125/c127 & e125/e127 for 9.5" Wide Guard
GP1200 Series for 9.5" Guard, SailPods for sail are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section.
SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications.
All SailPods Include:
Acrylic capped ABS plastic
Chromed stainless steel tamper-proof fasteners and wrench
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
|
436.34 |
|
|
GP1512 SystemPod Pre-Cut for Raymarine e7/e7D & 1 Instrument for 9.5" Wide Guard
GP1500 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Instrument Cutout: 3.6"
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
331.62 |
|
|
GP1604 SystemPod Pre-Cut for Raymarine e7/e7D & 2 Instruments for 9.5" Wide Guard
GP1600 Series for 9.5" Guard, SystemPods for Sail are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards.
SystemPods for Power are for mounting on a SK135 Stachion Kit can be used to mount a SystemPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SystemPod for overhead mounting applications.
Usable Face: 20"W x 6.25"H
Instrument Cutout: 3.6"
All SystemPods include
Acrylic capped ABS plastic
Chromed stainless steel tamper-poof fasteners
Double seal for watertight integrity
Models are available pre-cut for popular electronics
Stainless steel mounting hardware and mounting gaskets
*See Literature tab for an image with dimensions
|
410.17 |
|
|
Dual Actuator Marine Hardware Pack
High quality dual actuator hardware kit. This hardware bag is required in order to install hydraulic dual actuator systems. Includes: additional pipe nipples and brass "T" fittings.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
32.40 |
|
|
PED4900-09 PedestalPod Pre-Cut for Raymarine c95, c97, e95 & e97 for 9.5" Wide Guard - Carbon Black
PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your fishfinder/chartplotter from the harshest of wet boating conditions. PedestalPods provide the convenience of easily reaching and controlling the fishfinder/chartplotter while providing added security with protection from theft.
PedestalPods position your fishfinder/chartplotter at 20" off the deck and located near the bow and at the 45° angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor.
PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal keeping spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics.
Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the NavPod. The heavy duty, powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look and provides protection for wires and electrical connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets.
NavPods come with a security wrThere are pre-cut models available for 7", 9" and 12" LCD displays from all major marine electronic manufacturers.ench and nickel chrome-plated stainless steel tamperproof screws for protection from theft.
|
427.62 |
|
|
GP1809 SailPod Precut for Raymarine c95/c97 & e95/e97 for 9.5" Wide Pedestal Guard
Part #: GP1809
NavPod Protects Your Electronics In Harsh Conditions
The GP1809 SailPod is precut for Raymarine's c95/c97 & e95/e97 for a 9.5" wide pedestal guard.
|
375.26 |
|
|
Marine / Boat Hardware
We offer a full selection of marine hardware, including anchor rollers, anodes, ski tows, vents, and more. If you have a boat and need hardware, you are in the right place. From chocks and cleats to shaft seals and steering wheels, you can count on us for your boat hardware needs. It can sometimes be difficult to find everything you need for your boat, especially all in one place, but our full service site gives you plenty of excellent options for all the hardware you will need for your boating excursion.
Bow & stern eyes, deck fills, deck plates, and engine mounts are all available here, along with gas springs, grab handles, and hatches. We also have a wide assortment of hinges, hooks & clamps, and latches so you can find just the right option for your boat. With oarlocks, rail fittings, rub rail, shaft couplers, and swim platforms, as well as a selection of rope & chain pipe, you can find the things you need the most. We also have a selection of marine lumber, including teak. By using teak lumber for your marine needs, you have a great wood look that will hold up to the elements, and you can get it right here with all your marine hardware.
|
|
|
Rail Molding
Outside Corner
Rail Molding
Inside radius: 2"
Outside radius: 2-1/2"
|
18.04 |
|