1/2" Track Bulkhead Molding 1/2" Track Outside Corner Bulkhead Molding Inside radius: 1-3/4" Outside radius: 2-1/4"

1/2" Track Bulkhead Molding 1/2" Track Inside Corner Bulkhead Molding Inside radius: 1-3/4" Outside radius: 2-1/4"

3/4" Track Bulkhead Molding 3/4" Track Outside Corner Bulkhead Molding Inside radius: 2" Outside radius: 2-1/2"

3/4" Track Bulkhead Molding 3/4" Track Inside Corner Bulkhead Molding Inside radius: 2" Outside radius: 2-1/2"

Rail Molding Outside Corner Rail Molding Inside radius: 2" Outside radius: 2-1/2"

March 893-04 Brush 12V DC Pump Applications for the March 893-04 Magnetic Drive Pump include marine refrigeration and water displays. March Pump's industrial 893-04 is an American submersible seal-less centrifugal magnetic drive pump ideal for applications such as marine equipment. It is capable of generating a maximum flow of 2.7 gallons per minute at 1 foot, and its maximum head is 10.6 Feet (or around 4.5PSI). The 893-04 must be used submerged. The standard wet end (the materials that come into contact with the solution) is composed of Noryl, Nylon, Carbon/Teflon, Buna N, Stainless Steel, and Ceramic Magnet.  When submerged Epoxy, Delrin, and the motor leads are also in contact with the solution. The inlet connection is 0.375 inch female pipe thread, and the outlet is 0.375 inch smooth. The standard motor is a 0.006 Horsepower DC Brushtype Motor, available in 12 Volts.  The 12 Volt Motor has an operating range from 0 to 14 Volts.  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 160 Fahrenheit or 71 Celsius. The March 893-04 centrifugal magnetic drive pump is capable of handling mild corrosive chemicals, acids, and solvents.     Max Flow 2.7 GPM 11 LPM Max Head 10.6 FT 3.3 M Power .006 HP .004 KW Electrical 12V Range 0-14 Submersible Yes   Type Centrifugal Mag Drive Inlet 3/8"FPT Outlet 3/8"OD Wet End Noryl (Front and Rear Housings), Nylon (Impeller), Carbon/Teflon (Thrust Washer), Buna N (O-Ring), 316 Stainless Steel (Shaft), Ceramic Magnet Uses Pump must be used submerged When submerged, the following is also in contact with the solution Epoxy, Delrin, Motor Leads  

Ampco Pumps P1GXPIP-1/2 Plastic Cap Plug

Applications for the March AC-1A-MD-1/2 Magnetic Drive Pump include chemical transfer, photographic processing equipment, refrigeration systems, and water displays.   The AC-1A-MD-1/2 Part # 0115-0064-0100 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals.  The AC-1A-MD-1/2 may have been modified to handle these chemicals.    March Pump's industrial AC-1A-MD-1/2 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.5 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options).  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-1/2 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.     Unit System 60Hz 50Hz Max Flow 3 GPM 9 LPM Max Head 4.6 FT 1 M Power .005 HP .003 KW Electrical 115V 60HZ     230V 50/60HZ   Type Centrifugal Mag Drive Inlet 1/2"OD Outlet 1/2"OD Wet End Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet   Part # 0115-0064-0100

March TE-7S-MD 1.5hp 3 phase March Pump's industrial TE-7S-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation, chemical transfer, and scrubber systems. It is capable of generating a maximum flow of 53 gallons per minute at 10 feet, and its maximum head is 57.5 Feet (or around 25PSI). The standard wet end (the materials that come into contact with the solution) is composed of 316 Stainless Steel, Viton, Carbon, and Ceramic. The inlet connection is 1-1/2 inch female pipe thread, and the outlet is 1 inch male pipe thread. There are two standard motors. The first is a 1 Phase 60 hertz 115/208/230V and 50 hertz 110/220V 1 horsepower totally enclosed fan cooled motor.  The second is a 3 Phase 60 hertz 208/230/460V and 50 hertz 190/380V 1 horsepower totally enclosed fan cooled motor. There are performance differences between the hertz options. The maximum internal pressure the pump can tolerate is 200PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. The March TE-7S-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March TE-7S-MD is suitable for your application, please contact March Pump.   Perfect for Applications Including; Applications for the TE-7S-MD Magnetic Drive Pump include chemical recirculation, chemical transfer, refrigerators, scrubber systems, detergent mixers, computer cooling, carbon arc furnace cooling, silver recovery systems, and marine air conditioners.   Great for Chemicals Including The TE-7S-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Potassium Chloride, Potassium Hydroxide, Sodium Chloride,  Sodium Hydroxide (Caustic Soda), Fresh Water, Salt Water, and many more chemicals.     Unit 60HZ 50HZ System US Metric US Metric Max Flow 53 GPM 200 LPM 47.5 GPM 180 LPM Max Head 57.5 FT 17.5 M 39.4 FT 12 M Power 1 HP .745 KW 1 HP .745 KW Electrical 1PH 115/208/230V 60HZ, 110/220V 50HZ or 3PH 208/230/460V 60HZ, 190/380V 50HZ On 50HZ, the Single Phase Motor is rated for 1 horsepower or 0.7457 kilowatts. On 50HZ, the Three Phase Motor is rated for 1 horsepower or 0.7457 kilowatts.     Type Centrifugal Mag Drive Inlet 1-1/2"FPT Outlet 1"MPT Wet End 316 Stainless Steel (Front Housing, Rear Housing, Impeller), Viton (O-Ring), Ceramic (Shaft, Thrust Washers), Carbon (Bushing) Motor Options Available in 1HP, 1.5HP, 1HP Explosion Proof or 1.5HP Explosion Proof P/N 0155-0173-0300 (1 Phase 1HP) with Metal Motor Bracket P/N 0155-0174-0300 (3 Phase 1HP) with Metal Motor Bracket P/N 0155-0036-0300 (3 Phase 1.5HP) with Metal Motor Bracket P/N 0155-0285-0100 (1 Phase 1HP) with Plastic Motor Bracket P/N 0155-0286-0100 (3 Phase 1HP) with Plastic Motor Bracket P/N 0155-0287-0100 (3 Phase 1.5HP) with Plastic Motor Bracket  

Bosworth 400-H-Ale-1/2"F Guzzler 1/2" Hand Pmp,Tappd   Bosworth Hand Diaphragm Pump Guzzler Delrin, .44Qt per Stroke, 1/2" Female Threaded Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle with Epoxy Coated Aluminum Clamp Ring for Durability

Fill-Rite 901-1 1/2 Flow Meter   Fill-Rite Flow Meter 6-40GPM Nickel Plated 1 1/2”FNPT Ports

Fill-Rite 901-N-1 1/2 901 Meter Nickel Plated 1.5   Fill-Rite Flow Meter 6-40GPM 1 1/2"FNPT Ports

BURKS 350G6-1 1/2, Centrifugal Pump 230/460v 3PH 5HP Bronze Fitted Cast Iron Construction.  Close Coupled to a 5 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.  Ports are 2 Inches NPT Inlet, 1-1/2 Inches NPT Outlet. Impeller Diameter is 5.88 Inches.   UNSPSC Code: 40150000  

BURKS GNB6-1-1/2-6.25 CENTRIFUGAL PUMP BURKS Model: GNB6-1-1/2-6.25 Burks Frame Mounted End Suction GNB Series Pump Bronze Fitted, 6.25" Bronze Impeller 2" Suction & 1 1/2" Discharge Carbon / Ceramic / SS Buna-N Shaft Seal Maximum Temperature of 225°F (107°C) Application: Waste Treatment and Plating   Ships Via Truck please us the Contact Us page to get a Freight Quote.

BURKS T350G6-1 1/2, CENTRIFUGAL PUMP 3PH 5HP TEFC Close Coupled, 60 Hz, Three Phase, 3500 RPM, 5 Horsepower, TEFC Motor Enclosure, Frame Size 184JM   UNSPSC Code: 40150000