Standard Hatch Hinge Size:2-5/8" x 3-1/8" Fastener: #10(7) Material: Polished Brass

Standard Hatch Hinge Size:2-5/8" x 3-1/8" Fastener: #10(7) Material: Chrome Plated Brass

Rail Base Fitting Rectangular Base 60° 316 Stainless Steel - 1-7/8" x 3-1/4" - 1" OD These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included).  *Stainless tubing with a wall thickness of 0.049”

Strap Clamp Roll Bar Mount w/Standard Length Double Socket Arm & 2.5" Round Base with 1/4"-20 Male Threaded Post The RAM-B-149Z-2-202AU consists of a steel strap base, u-bolt bases, double socket arm and 2.5" dia. round base with 1/4"-20 threaded post. Designed for a clean installation, the included roll bar base accommodates most common tubing sizes on UTV's and ATV's, allowing for the placement of the RAM rubber ball base. Safely concealing a strap clamp in a compact housing, you won't have to worry about exposed sharp edges or unwanted loosening. The camera base contains a 1" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Standard Hatch Hinge Size:3" x 2-1/2" Fastener: #10(8) Material: 316 Stainless Steel

Eye Bolt Stock:5/16" Eye: 5/8" Length: 2-5/8" Threads:1-3/8" Material: 304 Stainless Steel

Cabin Door Hook Length: 2" Fastener: #6(4) Material: Polished Brass *Hooks pre-drilled for #6 screws WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Flush Pull Ring Size: 2" x 2-1/2" Fastener:#6(4) Material:Polished Brass WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ALTUS Ventilation Hatch - OD 13-1/8" x 13-1/8" ALTUS is made of a sturdy aluminum profile (height 13/16” (21 mm)) with a satin sheen anodized frame and is suitable for design category A and appliance location area II. The acrylic has a thickness of 3/8” (10 mm) and is ‘dark smoke’ colored. These hatches come with adjusters which are stylish and easy to operate, allowing the lid to be held open at almost any angle up to 90º. Type ALTUS can be fitted on the deck and opened from the inside or outside. It has a ventilation position and can be locked completely watertight. They are CE-classified AII, which means to say that they are designed for ocean use and can be fitted on deck. These hatches are provided with carefully designed hatch adjusters, which are both stylish and easy to operate. Like other VETUS hatches, the ALTUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position. The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”. An aluminum counter flange and a mosquito screen are available for these hatches. Features: External Dimensions -  13 1/8" x 13 1/8" Cut Out Dimensions - 10 1/4" x 10 1/4"  Number of Handles - 1 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Take-Apart Hinge - Left Allows engine boxes, hatches, etc. to be easily removed, or laid back completely when open for full access. Size:3-5/8" x 1-1/2" Fastener: #10(4) Material: 316 Stainless Steel

Take-Apart Hinge - Right Allows engine boxes, hatches, etc. to be easily removed, or laid back completely when open for full access. Size:3-5/8" x 1-1/2" Fastener: #10(4) Material: 316 Stainless Steel

Description - C.P. Brass Raw Water Washdown Base diameter- 1-5/8" Depth - 3-3/16" Threads - 1/2" FIPT x 3/4" Fastener - #6 (2) WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Swivel Safety Hasp Dimensions: 1-1/8" x 3" Staple Hole: 5/16" Diameter Fastener: #8(4) Material: Chrome Plated Zamac *For Freshwater Installation Only

Stainless Steel Rubbing Strakes - 203 x 19mm (7-7/8" x 3/4" By popular demand Barton Marine introduces a range of stainless steel rubbing strakes,to help prevent rope wear to deck edges and coamings.These attractive strakes are easy to fit and will last a lifetime.

Double Braided Nylon Dock Line - 5/8" x 35' - Black Features:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point