Stainless Steel Set Screws 1/4"-28 Thread 10 Pack

Groco 1032X316Set 10-32 X 3/16 Ss Set Screw  

Groco 14X14Set 1/4-20 X 1/4 Ss Set Screw  

Oberdorfer 997.1 Screw 10-24 X 1/2 Ph  

Oberdorfer 771.1 Screw 10-24 1 1/2 Ph  

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (1-3/4" – 2-1/4") Clamping Range - 10-Pack - SAE Size 28 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.   Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 28 Hose Inner Diameter: (inch) 1-1/2" - 1-5/8"  Clamping Range: (inch) 1-3/4"– 2-1/4" / (mm) 44-56 Recommended Torque Inch lbs: 45-60

VR04 V10 Heavy Duty Set Screw Terminals - 1/0AWG - 2 Pack You'll get tight and secure connections for your amplifier's power and ground cables with a set of T-Spec's set screw ring terminals.  You just insert the wire's stripped end and tighten the Torx T-20 set screw for a long-lasting and worry-free electrical connection. Features: One (1) Red and one (1) Blue marked terminal - 1/0 AWG  5/16" hole Nickel finish T20 Torx® screws Gate Lock technology In the Box: Two (2) 1/0 AWG wire terminals w/ set screws 2 Rubber insulators *Sold as 2 Pack WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

VR48 V10 Heavy Duty Set Screw Terminals - 4 AWG - 2 Pack You'll get tight and secure connections for your amplifier's power and ground cables with a set of T-Spec's set screw ring terminals.  You just insert the wire's stripped end and tighten the Torx T-20 set screw for a long-lasting and worry-free electrical connection. Features: One (1) Red and one (1) Blue marked terminal - 4 AWG  5/16" hole Nickel finish T20 Torx® screws Gate Lock technology In the Box: Two (2) 4 AWG wire terminals w/ set screws 2 Rubber insulators *Sold as 2 Pack WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - (3/4" – 1-1/8") Clamping Range - 10-Pack - SAE Size 10 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp. Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 10 Hose Inner Diameter: (inch) 1/2" – 5/8" Clamping Range: (inch) 3/4" – 1 1/8"  / (mm) 19-28 Recommended Torque Inch lbs: 25-35

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (3/4" – 1-1/8") Clamping Range - 10-Pack - SAE Size 10 Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.   Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 10 Hose Inner Diameter: (inch) 1/2" – 5/8" Clamping Range: (inch) 3/4" – 1-1/8" / (mm) 19-28 Recommended Torque Inch lbs: 35-45

316 SS T-Bolt Clamp - 3/4" Band - 1.28"-1.59" Range - 10-Pack Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union.  Recommendations: For our Silicone and PVC products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert  Specifications: Hose Inner Diameter (inch): 1" Hose Outer Diameter (inch): 1.28" - 1.59" 

316 SS T-Bolt Clamp - 3/4" Band - 2.28"-2.59" Range - 10-Pack Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union.  Recommendations: For our Silicone and PVC products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert  Specifications: Hose Inner Diameter (inch): 1-7/8" - 2" Hose Outer Diameter (inch): 2.28" - 2.59"

316 SS T-Bolt Clamp - 3/4" Band - 3.28"-3.59" Range - 10-Pack Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union.  Recommendations: For our Silicone and PVC products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert  Specifications: Hose Outer Diameter (inch): 3.28" - 3.59"

316 SS T-Bolt Clamp - 3/4" Band - 4.28"-4.59" Range - 10-Pack Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union.  Recommendations: For our Silicone and PVC products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert  Specifications: Hose Outer Diameter (inch): 4.28" - 4.59"

316 SS T-Bolt Clamp - 3/4" Band - 5.28"-5.59" Range - 10-Pack Very strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union.  Recommendations: For our Silicone and PVC products Can be used on any hose connection with a piece of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert  Specifications: Hose Outer Diameter (inch): 5.28" - 5.59"