Description: Zinc Plated Steel Clamp-on Oarlocks. Horn Inside Diameter: 1-1/2" - 1-3/4" Shank Diameter: 1/2" Shank Length: 2-1/16"

Clamp-On Flag Pole - 1/2" Diameter Stainless Steel Clamp & Pole Features: Clamp-On Flagstaff Pole made of 304 S.S. Clamp made of 316 S.S. Diameter - 1/2, Length - 17", Clamp Tube Size-7/8"

1000 lbs. Zinc Plated Swivel Jack with 6" Poly Wheel Designed for use with marine and utility trailers. Includes all the necessary mounting hardware. Features: Bolt-on, zinc plated, side winding swing away jack 1000 lbs. capacity 6" wheel 10" of travel Fits up to 3" x 5" tongues Mounting hardware included Warranty: Limited 1-Year WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Wobble Roller Retainer Ring - Zinc Plated Used by many trailer manufacturers to secure wobble rollers onto their individual shafts. Zinc plated. Two retainer rings and two 1-1/8" washers per blister package.

SWIVL-EZE 7x7 Zinc Plated  Steel 3/4" Pin Base 7" x 7" Lock'N-Pin 3/4" Pin Base SP-67739-T is zinc plated steel. It features a threaded bronze bushing for secure fit and durability. Easy to install with six screws or bolts through the deck. Add more seating to your pontoon, fishing or cruising boat with Attwood seating products. Attwood develops high value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions. Features: 7" x 7" Lock'N-Pin 3/4" Pin Base is a zinc plated steel top plate. Works with a threaded pedestal pin and features an acetal bushing for secure fit and durability Six bolt or screw attachment (hardware not included) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Clamp-On Ski Mirror Universal mount fts up to 1/2" thick window frames and adjusts easily to meet most boat applications. Curved mirror provides a wide feld of view. Soft touch mounting clamps protect windows and frames. Zinc plated hardware and powder coated shaft assembly WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Zinc Plated Steel Receiver Pin with Clip  The corrosion resistant zinc plated steel receiver pin ensures your ball mount or other hitch-mounted accessories stays securely engaged to your trailer hitch. Hitch pin clip included. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Zinc Plated Safety Chain  Use this chain between your trailer and vehicle as an added layer of security to prevent separation if trailer inadvertently comes off trailer ball. Secures with S-hooks on both ends. Zinc plated steel construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Zinc Plate Anode for Mercury Verado 6 Features: Material: Zinc Specifically for Mercury Verado 6

Mini Zinc Plate Anode 6" x 4" x 1/2" Features: Plate for hulls Material: Zinc Dimensions: 6" x 4" x 1/2"

Pontoon Square Rail Adjustable Clamp On Rod Holder All the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices. Our clamp fits 1" to 1-1/4" square rail Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp Angle around the rail is infinitely adjustable Angle to the left or right adjusts in 15 degree increments 9" tall tube with 1-5/8" ID Includes 304 stainless mounting screws and the hex key needed to make the angle adjustment and to tighten the clamp in place. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rectangular Zinc Plate Anode with Inserts - 12" x 6" x 1" This rectangular plate anode is designed to be installed on the hull of a boat. The slotted holes in the plate prevent the need for drilling and give divers the ability to install them underwater. Much like other anodes, this anode works by absorbing corrosion and preventing it from reaching other metallic surfaces of a boat. Features:  Meant for saltwater boat use Boat type: Yacht & Superyacht Specific: Rectangular plate with insert  Specifications: Material: Zinc Weight: (lbs) 14.68 / (kg) 6.66 Dimensions: i: (inch) 5.51" / (mm) 140 l: (inch) 12.01" / (mm) 305 a: (inch) 5.98" / (mm) 152 h: (inch) 0.98" / (mm) 25 Ø: (inch) 0.51" x 4.02" / (mm) 13 x 102 *Sold as an Individual  

RAM® Tough-Claw™ Small Clamp Mount with Diamond Plate The RAM-B-400-238U consists of the small RAM® Tough-Claw™ base, marine-grade aluminum double socket arm, and diamond base adapter. The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, and odd-shaped rails and bars. The RAM® Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. The diamond base adapter contains the industry standard universal 2-hole AMPS hole pattern, which will connect to a large variety of RAM® Mount and third-party holders. The mount is designed with a RAM® 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. Features: Includes a small version of the RAM® Tough-Claw™ and medium length B size RAM® double socket arm with diamond plate features industry-standard AMPS pattern and measures 2.43" x 1.31" A small version designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surface Made of marine-grade aluminum, high-strength composite, and stainless steel hardware for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Clamp Range: .625" - 1.14" diameter Socket to Socket Length: 3" Hole Pattern: 2-Hole AMPS: 1.912" Plate Size: 2.43" x 1.31" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum and high-strength composite Packaging Type: Polybag Weight: 0.69 lbs

Aluminum Clamp-on Rod Holders Model:  RA5001SL Color:   Sliver Fits:      1.050" O.D. Pipe Mount:  Vertical JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.

Aluminum Clamp-on Rod Holders Model:  RA5001GL Color:   Gold Fits:      1.050" O.D. Pipe Mount:  Vertical JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.