Description: Line Size: 5/8" Material: 316 Stainless Steel Fastener: #10 (2) Dimensions: L: 5'' Units: Each Weight: 6.5 oz.

Description: 316 S.S. Straight Shock. Length - 6" Line Size - 3/4" Weight - 7.8oz. Material: 316 Stainless Steel Fastener: 1/4" (2)

Mid-Rail Chock/Cleat Stainless Steel Schaefer T-Track Chock cleats will fit Schaefer T-Track measuring 1" wide, 3/8" overall height, 1/8" "T" thickness and a base width of 1/2". They will not fit earlier versions of T-Track or some competitors models.  Specifications: Length 6-1/2" (165 mm) ID 1-7/16" (180 mm) Line Size 1/2" (13 mm) Track 1" x 1/8" (25 mm x 3 mm) Pin. Size 1/4" (6 mm) SWL 2500 lbs. (1140 kg) Weight .9 lb. (.41 kg). 

Mid-Rail Chock/Cleat Stainless Steel - 1-1/4" Chock cleats will fit Schaefer T-Track measuring 1-1/4" wide, 7/16" overall height, 3/16" "T" thickness and a base width of 11/16". They will not fit earlier versions of T-Track or some competitors models. Specifications: Length 7-1/2" (190 mm) ID 1-3/4" (45 mm) Line Size 5/8" (16 mm) Track 1-1/4" x 3/16" (31 mm x 4.6 mm) Pin. Size .355 SWL 4500 lbs. (2045 kg) Weight 1.5 lbs. (.68 kg)

Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back.  Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Designed and tested to prevent water from entering the fuel system Compatible with Ethanol blended fuels Stainless Steel finish EPA / CARB Certified Dual 1 psi overpressure relief safety valves built into the deck fill caps Automatic nozzle shutoff 4-18 gpm

Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel Cap Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling. Features: Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Automatic nozzle shutoff 4-18 gpm Stainless Steel finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels

170 Finger Grip Destroyer 5-Spoke 13.5" Stainless Steel Cap 3/4" Tapered Shaft with Knob The Destroyer Wheel is a 5-spoke stainless steel steering wheel that can be a great addition to any boat. This specific steering wheel comes with a fitted black center cap. Features: Destroyer Wheel 6 spoke Standard rim Back center cap 10-degree dish Fits a 1" straight shaft

170 Finger Grip Destroyer 5-Spoke 15.5" Stainless Steel Cap 3/4" Tapered Shaft with Knob The Destroyer Wheel is a 5-spoke stainless steel steering wheel that can be a great addition to any boat. This specific steering wheel comes with a fitted black center cap. Features: Destroyer Wheel 6 spoke Standard rim Back center cap 10-degree dish Fits a 1" straight shaft

5" Stainless Steel Power Mount - 7" x 7" Base - f/Garmin/Raymarine 3G/4G Radar Includes ADA-R1 modular top plate. Seaview Stainless Steel Radar Mounts are 5" tall and aft leaning. The 7" x 7" base plate utilizes a small footprint, great for installations where space is limited. The body is made out of 316 stainless steel. This Seaview stainless steel mount is also light bar compatible with Seaview stainless steel light bars. The stainless steel light bars come pre-wired and are USCG approved for boats up to 20 meters (65.6 ft.) in length. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

BS-5 Stainless Steel Basket - 2.6" x 9.4" GROCO's 304 Stainless Steel filter baskets for the raw water strainers. The baskets have an improved handle design. Fits: ARG-1250 SA-1250 VD-1250

V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob - Black Features: Speed knob included All black, including the speed knob Steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards Specifications: Diameter: (inch) 13.5" Material: Stainless steel 3 spokes *Note: Wheel nut is not included and is needed for installation 

V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob Features: Polished stainless steel Speed knob included Steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards Specifications: Diameter: (inch) 13.5" 3 spokes *Note: Wheel nut is not included and is needed for installation

V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob & Chrome Nut Features: Speed knob and nut included Polished stainless steel Steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards Specifications: Diameter: (inch) 13.5" 12mm Wheel Nut - 1.75mm thread pitch 3 spokes

V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob & Chrome Nut - Black Features: Speed knob and nut included All black, including the speed knob & chrome nut Steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards Specifications: Diameter: (inch) 13.5" 12mm Wheel Nut - 1.75mm thread pitch Material: Stainless steel 3 spokes

Spring Clamp - 304 Stainless Steel - 2-1/4" Whitecap Marine Hardware is made from the highest quality materials. Whitecap's stainless steel products are manufactured from corrosion resistant 316 Stainless Steel and polished for a long lasting shine. When you want the best for your boat...ask for Whitecap. Features: Length: 2-1/4" Extension: 1" to 1-3/4" Fastener: #6 (2) Material: 304 Stainless Steel