Open Base Cleat Chrome Plated Zinc Alloy Length Overall: 4" Dimensions Base: 2-1/8" x 1-1/2" Max Rope Size: 5/16"

Open Base Cleat Chrome Plated Zinc Alloy Length Overall: 6" Dimensions Base: 3" x 1-3/4" Max Rope Size: 7/16"

Open Base Cleat (1188) Chrome Plated Zinc Alloy Length Overall: 8" Dimensions Base: 4" x 2-1/8" Max Rope Size: 5/8"

Open Base Cleat (1252) Chrome Plated Zinc Alloy Length Overall: 6-1/2" Dimensions Base: 3" x 1-1/8" Max Rope Size: 3/4"

Ribbed Type Rowlock Horns - Chrome Plated Zinc - Pair Specs: Finish: Chrome Shank O.D.: 1/2" Shank Length: 1-3/4" Between Horns: 1-3/4"

Surface Mount Drawer Pull - Chrome Plated Zinc Specs: Chrome Plated Zinc Alloy Overall Width: 3-7/16" Inside Width: 2-5/16" Screw Size: 6

Round Type Rowlock Horns - Chrome Plated Zinc Features: Chrome plated zinc alloy Shank O.D.:1/2" (1.3cm) Shank Length: 1-3/4" (4.4cm) I.D. Horns: 2" (5.1cm)

Swivel Eye Hasp - 3" - Chrome Plated Zinc Features: Chrome Plated Zinc Alloy Padlock eye swivels to act as a latch Specs: Closed Length: 3" Width: 1" Padlock Clearance: 11/32" Screw Size: 6

Flush Pull Chrome Plated Zinc Alloy Black Polymer Finishing Flange Spring Loaded, Can be mounted Horizontally or Vertically

Red/Green Horizontal Mount Side Lights - Pair - Chrome Plated Zinc This Perko light is certified for use on power-driven vessels under 20 meters (65.6 feet) in both the USA and European markets. Features: Chrome-plated zinc alloy top with black polymer base High-tech, self-contained LED modules Same footprint as the 0627/0628 incandescent lights (wiring hole and mounting screw locations may vary) 2-mile (USCG 2nm) certified Specifications: Voltage: 12 Volt LED Wattage: 2.5 watts Amperage: 0.21 amps Dimensions (L x W x H): 3-3/8 in. x 2-1/2 in. x 1-1/2 in. Screw Size: #6 Finish: Chrome Meets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nm NMMA Type Accepted Number: 2619658 *Sold as a pair

Perko Rectangular Plug-In Base f/Pole Cards - Chrome Plated Zinc/Black Features: Plain black cap, chrome plated zinc alloy Black polymer base Pigtail leads Fits 1343, 1348, 1400, 1451 and 1470 Series All-Round Pole Lights Specs: Number of Pins: 2 Base Dimensions: 3-3/4" x 1-5/8" Tube Angle: 16° Screw Size: 8

Bi-Color LED Horizontal Mount - Chrome Plated Zinc This Perko light is certified for use on power-driven vessels under 20 meters (65.6 feet) in both the USA and European markets. Features: Chrome-plated zinc alloy top with black polymer base High-tech, self-contained LED modules Same footprint as the 0627/0628 incandescent lights (wiring hole and mounting screw locations may vary) 2-mile (USCG 2nm) certified Specifications: Voltage: 12 Volt LED Wattage: 2.5 watts Amperage: 0.21 amps Dimensions (L x W x H): 3-3/8 in. x 2-1/2 in. x 1-1/2 in. Screw Size: #6 Finish: Chrome Meets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nm NMMA Type Accepted Number: 2619657

ZAMAK Chrome Plated Zinc Cleats - Pair - 4-1/2" For decades, Attwood has set marine industry standards for great looking, durable, freshwater hardware. Our Perma-Plate® process provides the best chrome-plating in the industry with eight individual layers of plating. Each layer adds to the product’s durability and corrosion-resistance. This Perma-Plate® process produces the finest, most corrosion-resistant ZAMAK hardware available exclusively from Attwood. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Cowl Ventilator (0870) Chrome Plated Zinc Alloy Cowl with Black PERKO-KOTE Base 3" Duct Thread into Neck, Hose Clamps Not Required Cowl Opening Square: 7-1/3"

Fishing Rod Holder - 65° Angled Flush Mount - Chrome Plated Zinc Features: Chrome Plated Zinc Alloy Flange Angled Flush Mount (Approximately 65°) Anodized Aluminum Tube Soft Black Liner Flange Gasket with Integral Flip-Up Cap D01 & DPD - Integral Drain Bib or 5/8 Inch I.D. Flexible Hose Specs: Mount Type: Angled Drain Bib: No I.D. Tube: 1-5/8" O.D. Tube: 2" Length Under Flange: 8" Flange: 4-1/4" x 3-1/2"